JCI Analogue Dashboard V850 D70F3532 Mileage Recalibration Using the ABRITES RH850/V850 Programmer

Hello, friends!
Today I am going to show you how to use the ABRITES RH850/V850 Programmer to perform mileage recalibration on an analogue JCI MQB dashboard equipped with a V850 D70F3532 processor.
There are a few key moments during the procedure. Much like in the previous video, it is firstly very important to identify the dashboard you are working on and find the corresponding option in the ABRITES RH850/V850 Programmer's menu. Secondly, follow the wiring diagrams for it very carefully when unsoldering the capacitors. Do not rush it, make it right. And thirdly, solder the ABRITES RH850/V850 Programmer's wires at the designated points in the diagram.
The next step is to start the software and read the Immo data. It's important to always make a backup, so once you have read the Immo data, save it to a file. After that, you can safely edit the mileage value and press Write. As simple as that. This is an extremely useful feature when adapting a new or a used dashboard to a vehicle and you need to set the same value in the replacement dashboard as in the donor one.
Watch the video and let me know how you like it in the comments below. Leave a like and subscribe, ring the bell for more tutorials!
Have fun!
AVDI FAN
Hardware used:
1. AVDI - abrites.me/avdi-zn085-3532-video
2. ZN085 ABRITES RH850/V850 Programmer - abrites.me/zn085-3532-video
Software used:
1. AMS - abrites.me/ams-zn085-3532-video
2. VN007 - abrites.me/vn007-3532-video

[@youssnouf]

I make all this in the rear of a dark caddy

[@radioauto4423]

Good job ✅💪

[@joseluisferreira2308]

Como faço para fazer adquirir um equipamento de voces?

[@joseluisferreira2308]

Este instrumento e de gual carro ,.

[@krzysztofbadaczewski7416]

hello, can I ask you to tell me the name of the soldering iron you use?

[@twinturbo1989]

Yes, it is a Weller, I believe the 1010 model.

[@hafi911]

What tool do use with these clusters to power it on on bench ?

[@twinturbo1989]

All you need is in the kit

[@hafi911]

@@twinturbo1989 which kit ? Abrites kit ?

[@twinturbo1989]

@@hafi911 Yes, this is the one we use

[@hafi911]

Whats its number or product name ?

[@sieconners1376]

3525 JCI when we getting support for it

[@ungask]

How to learn spare key for JC dash when we have CS read by programmer??

[@twinturbo1989]

go to Key programming by cs

[@josneiboddenberg1565]

Does it work on VW Brasil dashboards?

[@twinturbo1989]

Works on all MQB clusters

[@Car4.]

Can transfer immo data dashboard exchange?

[@twinturbo1989]

yes, we will make another video on that exactly