✨ Bosch Dishwasher Isn’t Pumping The Water💦 FIXED ✨
HTML-код
- Опубликовано: 16 окт 2024
- ✨ Bosch Dishwasher Isn’t Pumping The Water💦 FIXED ✨
This Video shows step-by-step how to replace the broken circulation pump impeller.
Click here to order a new Bosch Circulation Pump: amzn.to/3V6h2xe
If your Dishwasher Is just too far gone, here is a link to order A New Bosch Ascenta Dishwasher - Top Rated by Consumer Reports: amzn.to/3So5fbW
We just got one to replace our 20 year old Miele and It cleans as well and is even quieter👍
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-RUclips Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/s... .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
I found I didn't need to disassemble as much as you showed just to replace the impeller motor.
I think you only need to remove the kick plate and pull the dishwasher out (and of course turn off the power and water to be safe!)
I didn't need to remove the front of the door or the side panels or the sump. The impeller motor just needs to be unplugged and it twists off.
Nice job👍
This is exactly the issue for our dishwasher. Thank you so much! Waiting for the parts to arrive and then... putting it back together
Excellent ,
Thank you
This video showed my problem exactly. Impeller fell right out so clearly this was the problem. I can’t get this part, all I could find was out of stock so I used epoxy to glue it together (“JB Weld” two part epoxy good for 550F). Also had to replace the inner C-tube as it had split at the bottom. Thanks!
Glad it helped😊👍
is it still work well? Can you provide name of glue please?
Yes still working name of glue is in my original comment above
@@zazoobah Thank you for replying. I search for JB Weld glue, there are many of them, I don't know which one. Please give me the link or exact version. Thank you
I believe I used the MarineWeld version. Really most of the epoxy’s would be fine to use - 10 buck at home depot
Your video on rodent damage to the Styrofoam float was exactly what I found on my Bosch dishwasher. Thank you so much... It was a cheap and easy repair.
Thanks so much Richard😊
Just did this same job on a Kenmore Elite, which is really a Bosch. Same deal, impeller in two pieces. Parts ordered through Amazon
Very good Chris,
Please let us know how it goes.
Great video. Definitely helped me fix my issue. Thank you very much.
You’re very welcome👍
Hey mate - great video, many thanks for putting this together was very helpful
You’re most welcome😊
Hi! I was curious to get a few ever do a remote consult. I have my Bosch out and I feel like I’m close to repair but haven’t figured it out.!
Sure thing,
If you go to Scott the fix it guy RUclips channel and join as a member I can contact you and we can fix your Bosch👍
Hi, Scott, the soothing-voiced Fix-it Guy. I have a SHEM63W52N/20. Quit working after 1.5 yrs. After various fixes, I've now settled on circulation motor. Ordered a new one (12008381) and have it ready to swap out by using your video. But I'm confused about impeller. I can't figure out if impeller should be part of, or attached to, circulation motor? I don't see an impeller on new part, so I'm wondering if I need to somehow glue old impeller? I thought that as long as I was going to the trouble of replacing the motor, I would ck out price of impeller (kit?) and do that as well, but it doesn't seem like, for this newer model, there is such a thing? Please forgive me if it will become obvious once I take apart; I just hate to go to all the trouble, only to find out I should have included impeller purchase somehow in repair. I should say that I did previously clean out impeller (found a small amount of pet hair and a bit of debris) and reran dishwasher, but didn't help.
Great question, can you send a few pictures to: scottthefixitguy@yahoo.com
This one does have the impeller inside it: amzn.to/4eEF7EQ
@@ScottTheFixItGuyChannel … TY so much. I really appreciate your response. I swapped out motor and - voila! - dishes are still dirty. Sigh. It was such an arduous project for me, but I never could have done it without your video. Even so, there were many differences bt the model you showed and my model. I don’t know what I’m going to do now, but I’ve learned from my multiple attempts to repair this Bosch that, yes, I can do it; but, no, I don’t want to do it again. 😣I’ll be checking out your website re a remote consult, IF I don’t take a sledgehammer to this DW in the meantime.
Dang! Why not just build a new dishwasher while your at it! You did a good job but could they design that thing any more complex!!
It's German.....what do you expect?
Thanks. Followed your procedure to the letter and all is well.
Wow! Very thorough! I can't thank you enough for this video, Scott. Now, I need to work up the nerve to work on mine. 😊
You can do it😊😊👍
Hi great video..I have a very similar dishwasher to the one you're working on. But mine will not draw any water..It cycles as normal and sounds like the pump is trying .it would sometimes wash the dishes properly then all of a sudden not ..does this sound like it could be the impeller or does it sound like it could be another fault?
Thanks for making this video. Very helpful. Cheers.
Thank you😊
My impeller seems to be bound up with no obstructions in the drain area. I’m also getting a buzzing noise and standing in the water in the bottom of my SHV4303UC. Is the impeller the likely culprit? I tried running it after draining all the water and it’s getting no water into the system.
Can you send your same question to my email at: scottthefixitguy@yahoo.com
Any videos for European dishwashers? I think that I cannot repair a European Siemens water circulating pump, I need to replace it.
I agree, best to replace the whole circulation pump👍
Can't believe how much they want for this "kit" ...$140 CAN= ouch. Anyways, the video is awesome and easy to follow. All seems to be working (after a few tense moments) : the only thing extra I would add is when you get it all back together your dishwasher might still think it's on "rinse" and just sits there until you cancel that cycle and do a "reset". :-)
Great info. Chris😊
I can't even find a kit. Just the whole pump.
I have three parts that fell out while fixing it and now I don't know where they go back! A red plastic rod, a polystyrene disc with a hole in the centre and a 15cm grey plastic piece with a thimble shape at one end, a cross shape in the middle and it opens out in a V at the other end. I think I can see the red rod on the video, so I'm alright for that, but not idea about the other two!
I figured out that the grey piece linked into the red plastic rod. It's all reassembled now and I ran it on a quick cycle just to see if it worked before I put all the panels back on. Everything seems to be in order, fingers crossed! Thank you for making this video, Scott. I'd have had to scrap the machine otherwise! Also, I had a repairman look at it a few weeks ago and he said it would cost too much to fix, it's feels good to have completed this because it wasn't easy!
Is it possible to remove the whole motor/impeller/lower pump housing without removing the sump housing/upper pump housing
(after disengaging the locking tab and rotating the whole motor assembly clockwise) ?
I think you can do it.
Just have to remove the four screws in the four corners of the dishwasher that connect the dishwasher frame to the plastic blower assembly.
Then when you remove the motor and impeller housing by twisting it you should have room to be able to pull the motor out.
Are usually have to separateThe upper frame from the lower plastic housing by about 5 inches to slide the motor out.
Thanks for the quick response. The only thing that might foil this plan is if the motor starter capacitor bracket hits the underside of the tub floor before the motor/impeller housing disengages.
I wonder if you can remove the housing first?
Scott. My Bosch dishwasher turns on runs for a few minutes and turn off. Is this an easy fix.
Hi Ronnie,
It sounds like it may need a new controller that lives inside the upper portion of the door.
I'm technical, but good luck doing this if you never done this before. It's easier just to get a new dishwasher.
This one can be pretty tough
Anyone have luck gluing the impeller halves together with plastic marine epoxy?
It’s strange that the dishwasher doesn’t have a salt pot ?
If it did, I’d find it easier to remove the tank assy
And after all that there is no replacement part available - so it is off to the dishwasher store for the sake of $0.50 worth of plastic and rubber. Everything else is fine.
Hi Mark,
What’s your model number?
@@ScottTheFixItGuyChannel shu43c05uc/17 When I contacted Bosch they said I had gotten about twice the life expectancy already but the only thing keeping it from another X number of years is the impeller. I spend about half my life fixing things.
Here you are Mark: www.ebay.com/itm/Genuine-167085-Bosch-Dishwasher-Circulation-Pump-Repair-Kit-/252376466775?hash=item3ac2cf4557
@@ScottTheFixItGuyChannel Thank you. It says zero available. I am going to pull the unit and look - at this point I can do no wrong. May your days be filled with kind people and your nights with good sleep interrupted by even better other things.
Thanks so much Mark for your blessing. Can you try these guys for the part: www.ebay.com/itm/203039671108?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1rZUTf0Q8TSOMtoLZz4pSbA45&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=203039671108&targetid=1599090336377&device=m&mktype=&googleloc=9032028&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1599090336377&abcId=9300697&merchantid=109159219&gclid=CjwKCAiApfeQBhAUEiwA7K_UH9NcLJ8PIHs2r-HVEAPF0Qt4m3H4D3uJhIePkvTU7y_xXoSJw_PtnBoCAcMQAvD_BwE
This looks like what is up with our DW. One of those take pics as you take it apart so you know what it supposed to look like when it is being put back together. Sure would be nice if I could just pull the unit put it on its back and take off the bottom. A hot assistant with cleavage would stop me from skipping forward. Just an idea.
Good idea Mark😊👍😂
r u kidding me!?