Build is very nice and there is value in this case. I would use a gpu anti sag bracket with any bigger card. I really love how you show outside of the case which connector goes where. With your help, any novice can build a pc. Keep up the brillient work! 🎉
I haven't built a PC in over 10 years. Decided to go with this case. Thanks so much for the video, massive help! I am also shocked at how big that GPU is...things have changed a lot lol.
@@shuvi1565 I used this case to build a very simple office PC for my dad, so it's probably a not a good representation of any higher end build (ryzen 5 8500G with onboard graphics, stock case fans, stock cpu cooler). Noise is pretty minimal and temps run at about 45-50C, but the computer is never really under load with light office work/web browsing. I was happy with the build itself and the case looks great. It's a solid case, but I only put together a bare bones build. Good luck with your build.
@@definitelycultured7521 It's a nice case, but I only used it to build a simple office PC for my dad (ASUS TUF Gaming b650-plus wifi, Ryzen 5 8500G with onboard graphics, all stock case fans and stock CPU cooler, 32GB RAM, 1TB M2 SSD). It's never really under high load with office apps and web browsing, but temps run around 45-50C with just the stock fans/cooler.
Purchased this case in white yesterday. Cant wait to move my system into this. My old case is the Montech X3 Mesh (also white), but I want to try out this new fishtank model. It looks really nice and seems to be a very good value.
Just purchased this, will be coming tomorrow. Want to say thanks for providing information on the connections on the argb fans, they have not documented it anywhere what sort of connections they have or if they are daisy chainable etc.
@shuvi1565 I'd say the most noticeable thing is my gpu fans WHEN they are running, I'm only using 2 intake and 2 exhaust fans on a very low rpm fan curve, case is dead silent. But yeah, great budget case.
Simple and great showcase of the case! Going to order this one for my new computer build, was wondering could you install more fans to top or bottom, cheers! Seems like a really good case for price/value budget pc.
I got this case on pre order from scan honestly its amazing for the £49 i sent back the king pro because it was way to big. Didn't like the curved glass.
Thank you for this video, I am using the same case to build a system and the addition of fans at the bottom of the case is brilliant. What are you using to control your ARGB lighting?
I’m have this exact setup - same fans on bottom too. What are your thoughts on airflow and fan profiles for this with all of the tempered glass and fine mesh covers?
Does anyone know why that red light is blinking. I assume it's ok cause in the video his is as well as mine. Read that it's the HDD,SSD or something working. Is that right?
IDK why but non of the fans are detected in any rgb software including aura sync. (using b550f strix). Signal rgb wont detect it either but fans and lights are functional.
You need to show us the backside of the case and what cable it is because im struggling not knowing their names if they don't have them written on them. Mostly the fan cables, don't know which ones they are and also i have a usb looking cable i dont know where to plug on my motherboard
Just finished building with this case, and I noticed that your stock fan colors are blue and mine are rainbow. Did I do something wrong, or is there a way to change the color?
What you need is a Fan Controller. What it does is it combines multiple 3 or 4 pin PWM fan outlets into one 4 pin PWM connection which will only occupy one slot on the motherboard. The Deepcool FH-04 Fan Controller is a great option for its price but if you need more slots on the controller, ARCTIC Case Fan Hub Fan Controller is another great option. As far as I'm aware, these do not support RGB so if you need RGB control, go for something like the NZXT RGB & Fan Controller (2022) Fan Controller. Hope this helps!
im thinking of getting a thermaltake aio and a pack of 3 thermaltake argb fans. will i be able to control these fans with the provided montech case fans using the same software? or will i need an rgb hub to connect all the fans to?
I was thinking about making somewhat an exact build but I wanted to mount the gpu vertically, would it be possible to do it without having to remove the bottom fans?
Sorry but could you please add some subtitles? Idk if im tired rn but im struggling so hard to understand some parts since I'm not used to the terminology and you have a rather heavy accent 😅
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Build is very nice and there is value in this case. I would use a gpu anti sag bracket with any bigger card. I really love how you show outside of the case which connector goes where. With your help, any novice can build a pc. Keep up the brillient work! 🎉
Thanks
@@ChristopherFlannigannpc ahh reply 😭🙏
@@A.Gproductions_how old are you
just wanted to personally say thank you. Bought this case and needed some specific help on a few things. Good video man
I haven't built a PC in over 10 years. Decided to go with this case. Thanks so much for the video, massive help!
I am also shocked at how big that GPU is...things have changed a lot lol.
Yeah technology just increasing exponentially
Hey how are the temps & noise with this case? If you already assembled it, how was the process? I am also planning to buy this case
Hey gratz I'm also thinking to get Montech XR but I'm wondering how's the temperature performance and what's your spec for it?
@@shuvi1565 I used this case to build a very simple office PC for my dad, so it's probably a not a good representation of any higher end build (ryzen 5 8500G with onboard graphics, stock case fans, stock cpu cooler). Noise is pretty minimal and temps run at about 45-50C, but the computer is never really under load with light office work/web browsing. I was happy with the build itself and the case looks great. It's a solid case, but I only put together a bare bones build. Good luck with your build.
@@definitelycultured7521 It's a nice case, but I only used it to build a simple office PC for my dad (ASUS TUF Gaming b650-plus wifi, Ryzen 5 8500G with onboard graphics, all stock case fans and stock CPU cooler, 32GB RAM, 1TB M2 SSD). It's never really under high load with office apps and web browsing, but temps run around 45-50C with just the stock fans/cooler.
This guide really helped me! Thank you so much for making it! Very informative, nice and slow but also well paced. Explained everything I need!
I like your videos because you can see the case but also a whole build with said case. Very informative.
really impressive/intriguing case at that price!
Sure is
Thank you for the step by step guide really helped me on making my first pc.
I will be buying this case, thanks for the quick walkthrough and you have a beautiful design.
Frankly fantastic video. Everything is presented clearly and thoroughly.
i cant get enough of how you pronounce "case" - it´s so catchy and satisfying at the same time
Sick video mate, really appreciating this for my first build
Really enjoyed this video. Will be getting this shortly to replace my current case. Love that the side panels just pop on and off! Thanks !
Case just arrived and your video was very helpful. Thanks a lot!
Great video! I just picked up that case and incant wait to build in it!
Purchased this case in white yesterday. Cant wait to move my system into this. My old case is the Montech X3 Mesh (also white), but I want to try out this new fishtank model. It looks really nice and seems to be a very good value.
Hi ,, i have this case (bought it completed with everything installed) its magic ... nice video .. keep it up ;)
Thank you for the review, I just bought the XR Case and Hyperflow AIO. Looking for forward to the finished look.
Good Content & Detailed Info on the case as always.
Much appreciated
Just purchased this, will be coming tomorrow. Want to say thanks for providing information on the connections on the argb fans, they have not documented it anywhere what sort of connections they have or if they are daisy chainable etc.
How are the temps & noise levels with this case?
@shuvi1565 I'd say the most noticeable thing is my gpu fans WHEN they are running, I'm only using 2 intake and 2 exhaust fans on a very low rpm fan curve, case is dead silent.
But yeah, great budget case.
@@b3as_t Nice! Ordered it for 64€, really existed
That is a nice looking build! 👍
6:32 ... wow! really nice work/cut to show the connection also outside to get a better view!
Simple and great showcase of the case! Going to order this one for my new computer build, was wondering could you install more fans to top or bottom, cheers! Seems like a really good case for price/value budget pc.
Great looking built.
Bruh the "cable management" 12:25 kill me 🤣
How sturdy/quality build is this XR, compare to Montech 903 or Sky Two?
I got this case on pre order from scan honestly its amazing for the £49 i sent back the king pro because it was way to big. Didn't like the curved glass.
Thank you for this video, I am using the same case to build a system and the addition of fans at the bottom of the case is brilliant. What are you using to control your ARGB lighting?
The pack of 3 fans at the bottom costs more than the case with fans itself 😵💫
Hello, I have a big problem, I can’t find a type c header on the ASUS PRIME H510M-A R2.0 motherboard, help me please 😢
You will most likely need to get some form of adapter to plug into one of your motherboard headers to allow you to plug in usb c cable
I’m have this exact setup - same fans on bottom too. What are your thoughts on airflow and fan profiles for this with all of the tempered glass and fine mesh covers?
So... can the fan's rgb and speed be controlled without a fan hub? with the way you built the pc?
Nice case for that price! What do u think is the best case for best GPU temps?
Good, but not the best
Could you fit an Arctic freezer with 360mm on top?
adding only aio for 240mm to this case will be enough fans for 4060ti and i5 13400f?
Hi sir! How did you change the color of the fan into white?
Great build. But I was wondering how do you control the RGB on the fans since there is no button on the case for it.
Motherboard software
Very good video, thank you. Did I understand correctly that the two fans at the back pull the air out?
Will this case be big enough for a 50 card
Mr. Flannigan, do you think a 280mm Radiator might fit on the top?
Even tho its not officially supported?
thanks in advance ☺
Does anyone know why that red light is blinking. I assume it's ok cause in the video his is as well as mine. Read that it's the HDD,SSD or something working. Is that right?
yes.
Question: do you get the psu mounting bracket while purchasing the psu?
😅Beautiful❤
Thanks
IDK why but non of the fans are detected in any rgb software including aura sync. (using b550f strix). Signal rgb wont detect it either but fans and lights are functional.
You need to show us the backside of the case and what cable it is because im struggling not knowing their names if they don't have them written on them.
Mostly the fan cables, don't know which ones they are and also i have a usb looking cable i dont know where to plug on my motherboard
Yes this video went through the cables too quickly and didn’t explain much
planning to get this case for my first build, i got a question if the built fans bring air in or out of the case
Did you have problems installing the gpu with the side intake fans? I'm using a amd gpu and it doesn't seem to go in properly because of the fans.
Supposedly the non E version has better VRM but I can’t find it in the US. Is the X670E Steel Legend WiFi worth another $40 US over this E model ?
I've only used this one
Having issues figuring out the fan cables any chance you can help?
Just finished building with this case, and I noticed that your stock fan colors are blue and mine are rainbow. Did I do something wrong, or is there a way to change the color?
If your motherboard has the three pin argb headers you should be able to change them with your motherboard brands command center
Hey nice build but I got a question .
So for the bottom fans do I need a fan hub if my fans doesn’t connect magnetically?.
i have this case but i have the gigabyte b550M K motherboard and there isn’t enough slots for the integrated fans what can i do
What you need is a Fan Controller. What it does is it combines multiple 3 or 4 pin PWM fan outlets into one 4 pin PWM connection which will only occupy one slot on the motherboard.
The Deepcool FH-04 Fan Controller is a great option for its price but if you need more slots on the controller, ARCTIC Case Fan Hub Fan Controller is another great option. As far as I'm aware, these do not support RGB so if you need RGB control, go for something like the NZXT RGB & Fan Controller (2022) Fan Controller.
Hope this helps!
which cable do u plug into for the fans cause mine don’t reach they can only reach the top one on the mobo could u please help
im thinking of getting a thermaltake aio and a pack of 3 thermaltake argb fans. will i be able to control these fans with the provided montech case fans using the same software? or will i need an rgb hub to connect all the fans to?
I’m doing this build with this case I really need help man can I please dm you a few questions
Can we replace the 2 side panel fan with AIO radiator 240mm?
I was thinking about making somewhat an exact build but I wanted to mount the gpu vertically, would it be possible to do it without having to remove the bottom fans?
that card sags soooooo hard 😂😂
Did you have to install anything for the front panel to sit correctly, mine doesn’t stick on the top
That price is crazy for what you get
Don't know how they can do it
can i buy the standard fans and put them as exhaust and intake
My gpu is 3.5 slot big and there is no space for me to place my pc fan. Can i place them under the psu shroud?
how did u change the fan colors the asus software cant detect them?
Hi, how do you make the fan non rgb?
Can i use random thermal paste because i cannot find that one.
Yes you can it won't matter
Where are the accessories located
Is it possible to vertical mount gpu using this case? With a 4070 super aero
Trying to figure this out as well, if not it’ll be dremel and drill time to rig it it up 😂
can i control al the fan rgb at once and make them sinc together? both the case fans and the AIO
idk where the rgb button is
How did u change the color ?
cant you daisy chain all of these fans into one single argb header?
that card is sagging hard need to get a card support !!!
9/10 video because you forgot to put an anime action figure inside the tower. get it together man...
Does it fit a full atx power supply?
No io shield??
Dowsnit support vertical gpu mounting?
No there is metal between the slot covers
Where is the acssesorie bag located
It's 2024 👀USB 3.0 + TypeC = approval
Are the fans 4 pin pwm
No. They're 3 pin because it's ARGB
@@ИванХалим that has nothing to do with ARGB.
Yes they are PWM fans @flyboysmokes
You didn't show IO installation
How did u change the case fans colors?
i trying to find that out
that graphics card leans too much you should've grabbed a gpu bracket support instead of the extra fans
Sorry but could you please add some subtitles?
Idk if im tired rn but im struggling so hard to understand some parts since I'm not used to the terminology and you have a rather heavy accent 😅
My egg with h the is case doesent work
My case fans won’t spin
Did you fix it ?
+1
This video sucks
You’re so hard to understand