Man, I like your style. I see all these fancy shops and the way they explain, makes everything so complicated and so much time consuming. I’m in the same boat with you, I have $700 HVLP spray gun, $500 HVLP spray gun and bunch of $50-$100 guns, really can’t see much of a difference in spray quality. I build kitchens and custom cabinetry, I need stuff done fast and I feel so many times the cheaper guns get me running faster and I don’t care if any of these get damaged. On the expensive guns I would clean them multiple times a day and at the end of the day, but when you add the thinner cost you realize you spend more on cleaning than buying a new cheaper gun every once in a while. keep it up!
I refinish exterior doors in downtown Boston and spray several coats on in a day if the humidity is below 70%. Most clients think that it’s the finished product but the next day a lightly rub down with scotchbrite pads, tack and then spray on an exterior satin varnish. The lacquer saves me several days of door removal, installation and waiting for the finish to dry. Before lacquer it took 8-9 working days to strip to bare wood snd refinish. Now it’s 2 1/2 days. Profits increased dramatically! LACQUER! Thanks for the video!
Really great camera angles to show the lacquer as it hit the wood. Very helpful. i have watched, well dozens, of RUclips videos on lacquer, poly, and or shellac, and yours is the most practical and informative. Thanks
😳 I used to be a finisher and I worked with all kinds of Lacquers and I did Lectures and Seminars. That's pretty good Lacquer! You keep up the good work helping others to understand what's involved! 😳 Let me give you a tip! Understanding how and what a Viscosity cup is and how it's use is in accordance with different types of Lacquers can be very beneficial! Aswel as the use of different tips for the spray gun and pressure ratings. 😳 If you're not familiar with Viscosity Cups and the uses, Once you get a good understanding everything becomes a lot easier! 😳 Let me know if I can be of any help and you keep up the good work!
omg thank you for sharing. I was about to buy Lacquer for like 17$, then I decided to buy a spray one that costed 3$ lol. This video made me realize that I shouldn't regret that.
To me this the perfect video to watch.. you seem like a very down-to-earth man explained it in ways to me to which it exactly pointed out the ways i needed to see how it was done..i know it sounds funky, but for me personally it was perfect..thank you
My father-in-law passed away and I am finishing up some of his incomplete work in the shop for the family. This video was a big help, thanks for taking the time to share your craftsmanship.
@@davemacclary9845 Hello Dave, I do have a question. How durable is lacquer? I know that the question is very general but how can the durability of lacquer can be explained? I do have in mind that outdoor use is a big no. But is it durable enough for a dining tabletop?
@@luismariovazquez2655 Hi Luis. I use mostly just regular lacquer on antiques and furniture For a tougher finish I use a pre- cat that has hardners in it. Never use outside.
I just discovered lacquer a few days ago. I've used all the high end stuff; Poly Osmo, Odies, and every poly name out there. I did one project with brush on lacquer and it came out better than anything I've ever finished before on the first try. I'm going to definitely buy a sprayer after seeing this video. Thanks bud.
Very informative and thorough. I like the ventillation and your description of the Lacquer floating aound the bottom of the wood when you spray the top. Thanks for sharing
Thanks for sharing. I'm just getting started into woodworking and finishing seems to be a beast all its own. I really liked that your camera was set up so that the sun was lighting the surface just right so that you could really see the finish as you applied it.
So many opinions on this topic and I'm sold on your advice. I really appreciate you taking the time to make this video. Thank you so much. Happy to sub your channel. Looking forward to watching everything you do!
My experience with using lacquer is the same as yours. I've tried other finishes but I keep coming back to it because it's so fast and easy. Some might argue the the smell is a big negative, but it's a small price to pay for ease of use and good durability. I spray gloss because I'm making humidors and you are correct... you must first fill all the grain/pours first, otherwise it looks like shit. I don't worry about the dust either, but that's because I always sand and polish the top coat. I have found the same thing with cheap guns. They work great, you just can't replace the parts, so you just go out and buy a new one.
How many folks does it take to move one of those slabs? I'm usually by myself and would probably need a forklift or a vacuum hoist to move something like that, lol.
Hi - does anyone have a tip for getting the most lacquer on with the least amount of overspray? Fan size was just back from fully wide, 1.4 tip, fluid was 3/4 all the way out and air pressure was 25psi when sprayed. This was sprayed with a Kobalt HVLP. Also air pressure seems to drain the tank way faster than my HF gun.
Better gun. Cup guns have a horrible transfer rate regardless. Lower your air pressure should help. And if using a cup gun you should be thinning your lacquer 10% - 30% percent. I have a entry level sata cup gun that I use professionally. It was over $300 new. Transfer rate was better then my last cupgun but a actuall pump is still the way to go. Ventilation might be an issue for you a well. If your coat is drying before the overspray is sucked out if the room that could be causing your issue.
I came here looking for what someone had to say about spraying lacquer inside and you covered it. I feel the same about it my father painted locker cars and says there's nothing like it and we started painting guitars with it and then wood work also. it is the top. Mohawk toners!
Thanks for sharing! Great video. What product do you recommend for an exterior door? I want to keep the natural color of the wood...keep from darkening. The door is under a large awning. Thanks again.
Thanks, I guess it all depends on how much you want to spend. Awlgrip-awlwood is a great 2 part exterior finish, but with a bit of maintenance and enough coats even less expensive spar varnish from home depot will do the job. Only thing about spar is the amber color.
I guess it depends on the brand, I use m.l.campbell a lot, and it's a dealer and topcoat. They have a couple options for durability. magnalac and magnamax are both pre-cats and both great, magnamax is more durable, and then there's post-cat products that give the most durability. If your spraying from a can just follow the specs on it. It should be all you need though
Great informative video. I’m just learning about lacquer and it seems you did not wipe down the piece after sanding following the first spray; is it really not necessary to wipe off sanding dust or did you just not show it? Thanks.
Great video, thanks can’t wait to get started with spraying lacquer, quick newbie question if I use an oil based stain on my project is it fine to spray lacquer as my top coat, thanks
Great video, I’m on the market for an air compressor, i was wondering what compressor do you use and if you have any recommendation about what to get in terms of size psi cfm etc?
Thanks. I have a big one in my shop and a makita that can keep up with my spray gun. Most guns will tell you their air requirements, just get a compressor that can keep up.
Personally I prefer a clear or amber finish to let the natural color of the wood do the talking, but yes, you can tone the lacquer with dye stains. When I do this I prefer to thin it 50% with lacquer thinner and add my color. I spray in between coats of clear lacquer and build my color evenly. It takes good technique to get a even color, so I wouldn't suggest it for anyone not totally comfortable spraying. Better to use a spray and wipe stain then lacquer over it.
Good job sir . Lovely wood working. I'm of same opinion as you bro Nothing too fancy just getting the job done. And we'll done . That walnut was gorgeous wood.
To prep the piece/wood before spraying, do you just sand and clean it (like with a tack cloth)? Essentially spraying on bare wood? or should you wipe with water, thinner, or something else first?
In the cup it's good all day, only 15min or so between coats, and yes, I wipe down the surface after sanding. Tack cloths are good, but not always necessary
Thank you for the tips! Im trying to get into wood working so I am still learning how to stain and add finish. Do you ever stain the project before adding the lacquer?
No problem and yes. When staining I like xylene spray and wipe stains. They go on pretty even and dry fast so you can spray lacquer soon after. Oil stain can be dangerous with lacquer adhesion.
@@TruewoodsCould you elaborate a bit more on the oil stain and lacquer combination being dangerous? I’m wanting to spray lacquer over some Dalys stain. Thx
I'm sure it's not the best, but I use whatever the cheap spray guns I use come with. I visually adjust the fan and if I need to I thin the lacquer to get the spray pattern I like. For big projects I've used my airless and I go with and 8" fan and pretty small opening on that, but on my cup guns it doesn't seem as critical
hey, a question please. I am building a skin on frame 10’ boat. The skin I’m using is 9oz Dacron. The typical waterproofing that is used is poly varnish. Three coats are rolled on. What do you think about using lacquer? I have a spray booth and could spray it on. Is the lacquer at the hardware store representative so I can test it? Hate to put out a bunch of coins for a quart or two if it won’t work.
All of the lacquer I spray is for interior use. Stick with varnish or if you want something more durable awlgrip makes some good wood finishes for marine
Hey sir. Or other viewers Wondering if Laquer Matte would be suitable for extra protection on a couple new western cedar Adirondack chairs. I know cedar is excellent At enduring outdoor conditions but at the price of cedar these days , just want extra protection. Thanks for any input guys
Hi Good information, this might sound like a lame question but can you lacquer on top of a water based paint on pine. I have just sprayed an old dresser in a vintage colour and the paint seems soft when scratched. I am looking to protect the paint and make it more durable.. thanks in advance..
I would probably test a sample first, lots of times if I'm not sure what something is finished with and I'm spraying over it I'll use a vinyl sealer then lacquer.
@@woodzzy1I get crack because of wood expansion or contract. Is there any sealer to prevent that? Also what brand you use? And how much are they 5 gal? Also what kinda primer you use?
I am refinishing a kitchen table top that got some water/mold damage over the years (water got under a plastic table cloth that was rarely moved...). I was debating on what finish to use. I was figuring on a gloss finish, but am undecided between lacquer or polyurethane. My concern is a repeat of moisture damage. Thoughts?
First is what's available and what you're comfortable with. Most products these days are superior to the shellac that was used in the past as far as abrasion, moisture, and chemical resistance. Use what you're comfortable using. My favorite for indoor furniture is matte lacquer, but that's just me. There's also different qualities of lacquer, and you can't brush it on. Home Depot has some pretty good poly brush on finishes. So really it's all up to you
Forgot to mention.... the table, while not "technically" outdoors, lives on an enclosed back porch. It was an actual back porch that we turned into a essentially a "sun room". It can get pretty warm back there in the summer, and cold in the winter, as it's not heated usually.
Most of the lacquer I use is also a sanding sealer, if your not sure you could spray a vinyl sealer that'll go over anything, or just test it out and see what happens, that's what I like to do.
I prefer brushing lacquer myself. It's self-leveling so I don't have to worry about brush strokes and I can catch runs before they have a chance to dry that way. I occasionally restore old radios that were originally finished in lacquer but often I'll have to glue up loose veneer or replace it which never matches the original well, so I'll usually spray on some Mohawk toner to even the color out before I brush on the lacquer. I'm afraid that, with spraying I'd get runs I couldn't really do anything about as it dries so quickly. I usually use a semi-gloss finish. It also doesn't have to be perfect and I think it leaves the radios looking how they originally would have looked new. Another great thing about lacquer is that it is easy to strip the old finish off with lacquer thinner and a bunch of old rags. And I can use cheap brushes to apply it with. I usually go with 0000 steel wool between coats :)
My understanding is the longer the lacquer lasts, the less durable it is. Sometimes I spray post cat for durability, mostly I spray pre cat. Shelf life's are different for all of them. Guess it also depends how much you buy and how quickly you're planning on using it.
It says for "professional use only" I'm pretty sure they only sell to vendors, you'll most likely need to find a cabinet supply shop or paint supply shop to buy from.
Most guns will tell you the minimum air requirements, as long as the compressor can keep up it's no problem. I always run a regulator at the gun, and run the compressor at max psi.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Man, I like your style. I see all these fancy shops and the way they explain, makes everything so complicated and so much time consuming. I’m in the same boat with you, I have $700 HVLP spray gun, $500 HVLP spray gun and bunch of $50-$100 guns, really can’t see much of a difference in spray quality. I build kitchens and custom cabinetry, I need stuff done fast and I feel so many times the cheaper guns get me running faster and I don’t care if any of these get damaged. On the expensive guns I would clean them multiple times a day and at the end of the day, but when you add the thinner cost you realize you spend more on cleaning than buying a new cheaper gun every once in a while. keep it up!
Man, this guy is very professional, humble and makes me feel working with him since I’m in same field but, doing it for 25 years
Thanks man 🍻
I refinish exterior doors in downtown Boston and spray several coats on in a day if the humidity is below 70%. Most clients think that it’s the finished product but the next day a lightly rub down with scotchbrite pads, tack and then spray on an exterior satin varnish. The lacquer saves me several days of door removal, installation and waiting for the finish to dry. Before lacquer it took 8-9 working days to strip to bare wood snd refinish. Now it’s 2 1/2 days. Profits increased dramatically! LACQUER! Thanks for the video!
Really great camera angles to show the lacquer as it hit the wood. Very helpful. i have watched, well dozens, of RUclips videos on lacquer, poly, and or shellac, and yours is the most practical and informative. Thanks
😳 I used to be a finisher and I worked with all kinds of Lacquers and I did Lectures and Seminars. That's pretty good Lacquer! You keep up the good work helping others to understand what's involved!
😳 Let me give you a tip!
Understanding how and what a Viscosity cup is and how it's use is in accordance with different types of Lacquers can be very beneficial! Aswel as the use of different tips for the spray gun and pressure ratings.
😳 If you're not familiar with Viscosity Cups and the uses, Once you get a good understanding everything becomes a lot easier!
😳 Let me know if I can be of any help and you keep up the good work!
omg thank you for sharing.
I was about to buy Lacquer for like 17$, then I decided to buy a spray one that costed 3$ lol.
This video made me realize that I shouldn't regret that.
Great video, simple no frills and practical advice
My Father worked with wood for a hobby and people just don't realize how much work is involved with it , your work is amazing.
Thank you!
To me this the perfect video to watch.. you seem like a very down-to-earth man explained it in ways to me to which it exactly pointed out the ways i needed to see how it was done..i know it sounds funky, but for me personally it was perfect..thank you
Thanks! I try and stay humble and know there's always more to learn. Good luck!
My father-in-law passed away and I am finishing up some of his incomplete work in the shop for the family. This video was a big help, thanks for taking the time to share your craftsmanship.
Brent. If you need any advice, I have 40+ years spraying lacquers
@@davemacclary9845 Hello Dave, I do have a question. How durable is lacquer? I know that the question is very general but how can the durability of lacquer can be explained? I do have in mind that outdoor use is a big no. But is it durable enough for a dining tabletop?
@@luismariovazquez2655 Hi Luis. I use mostly just regular lacquer on antiques and furniture
For a tougher finish I use a pre- cat that has hardners in it. Never use outside.
That is some gorgeous furniture ! Beautiful craftsmanship. You have survival skills.
Hey! You are very relatable to real world circumstances and the DIY’er!
Much appreciated!
Thanks!
I just discovered lacquer a few days ago. I've used all the high end stuff; Poly Osmo, Odies, and every poly name out there. I did one project with brush on lacquer and it came out better than anything I've ever finished before on the first try. I'm going to definitely buy a sprayer after seeing this video. Thanks bud.
Glad I could help!
After watching this video and trying lacquer , it is now my choice for finish. Love how it dries fast and the finish is baby butt smooth
Good, no-nonsense video. Thanks man!
You are so cool! Laid-back and thorough... 😊 Thanks for the tips.
Anytime!
Very informative and thorough. I like the ventillation and your description of the Lacquer floating aound the bottom of the wood when you spray the top. Thanks for sharing
Thanks for sharing. I'm just getting started into woodworking and finishing seems to be a beast all its own. I really liked that your camera was set up so that the sun was lighting the surface just right so that you could really see the finish as you applied it.
Thanks! Enjoy!
Man looks great! I'm joe homeowner building crap in my shed! Hell of a time with brush strokes in it! Thanks for the tips!
Good luck and have fun! My first shop was a shed 8'x12' with other crap in it too!
So many opinions on this topic and I'm sold on your advice. I really appreciate you taking the time to make this video. Thank you so much. Happy to sub your channel. Looking forward to watching everything you do!
Nice video. Thanks a lot. You make it look so simple
My experience with using lacquer is the same as yours. I've tried other finishes but I keep coming back to it because it's so fast and easy. Some might argue the the smell is a big negative, but it's a small price to pay for ease of use and good durability. I spray gloss because I'm making humidors and you are correct... you must first fill all the grain/pours first, otherwise it looks like shit. I don't worry about the dust either, but that's because I always sand and polish the top coat. I have found the same thing with cheap guns. They work great, you just can't replace the parts, so you just go out and buy a new one.
Nicely explained. Clarified a bunch of my q's
Thanks
Thank you for this video. It's exactly what I was looking for.
Awesome! Glad it helped.
Does it matter what size tip you use in the spray gun?
thanks for teaching, this video really help me a lot
What pressure do you use when the trigger is pulled?
Excellent video. Very practical and informative
Hi, what about spray gun does the lacquar will get dry if you leave it when waiting for the first and second coat?
Thank you for a great video! I learned alot on these 12 minutes 🙌👍
Good job bud. I'm going to use for a table top on Oak. Question? Will I be able to clean the table off like a normal table?
Absolutely, just nothing abrasive
11:19 is it OK to spray while the piece is vertical? Won't the lacquer drip down leaving marks?
Glad to see your ventilation and mask in use. Good point about overspray drying before it lands on surrounding area -- big advantage.
Yes!
How many folks does it take to move one of those slabs? I'm usually by myself and would probably need a forklift or a vacuum hoist to move something like that, lol.
Hi - does anyone have a tip for getting the most lacquer on with the least amount of overspray? Fan size was just back from fully wide, 1.4 tip, fluid was 3/4 all the way out and air pressure was 25psi when sprayed. This was sprayed with a Kobalt HVLP. Also air pressure seems to drain the tank way faster than my HF gun.
Better gun. Cup guns have a horrible transfer rate regardless. Lower your air pressure should help. And if using a cup gun you should be thinning your lacquer 10% - 30% percent. I have a entry level sata cup gun that I use professionally. It was over $300 new. Transfer rate was better then my last cupgun but a actuall pump is still the way to go. Ventilation might be an issue for you a well. If your coat is drying before the overspray is sucked out if the room that could be causing your issue.
I came here looking for what someone had to say about spraying lacquer inside and you covered it. I feel the same about it my father painted locker cars and says there's nothing like it and we started painting guitars with it and then wood work also. it is the top. Mohawk toners!
****What happens to the spray gun in between coats? Do you need to clean it? Does it dry out?*
Assuming the finish has decent pot life and your gun doesn't leak no you don't need to clean it between coats.
Thanks a lot for the video. I learned much.
Thank you!
Do you have to sand after every coat or just the first coat?
Thanks for sharing! Great video. What product do you recommend for an exterior door? I want to keep the natural color of the wood...keep from darkening. The door is under a large awning. Thanks again.
Thanks, I guess it all depends on how much you want to spend. Awlgrip-awlwood is a great 2 part exterior finish, but with a bit of maintenance and enough coats even less expensive spar varnish from home depot will do the job. Only thing about spar is the amber color.
thanks for sharing. started spraying more. lot to learn.
dig your workshop mate
looks lived in and loved 🫡
Looks beautiful. Thanks for video
absolutely brilliant! super helpful.
This was very informative. Thank you. Just today I sprayed some lacquer on a desktop. I was wondering if it would be enough as a topcoat.
I guess it depends on the brand, I use m.l.campbell a lot, and it's a dealer and topcoat. They have a couple options for durability. magnalac and magnamax are both pre-cats and both great, magnamax is more durable, and then there's post-cat products that give the most durability. If your spraying from a can just follow the specs on it. It should be all you need though
Sick work bro.
Keep kicking ass.
Great informative video. I’m just learning about lacquer and it seems you did not wipe down the piece after sanding following the first spray; is it really not necessary to wipe off sanding dust or did you just not show it? Thanks.
Great video, thanks can’t wait to get started with spraying lacquer, quick newbie question if I use an oil based stain on my project is it fine to spray lacquer as my top coat, thanks
Thanks for the suggestion. Do you think that paint could be handpainted with very thin layers?
No, only for spray. If you want to brush on a finish there's plenty out there.
@@Truewoods Ok, good to know. Thank you.
One love from Jamaica mon.
Furniture looks phenomenal!
Thank you!
What a beautiful finish. What color lacquer did you use?
Great video, I’m on the market for an air compressor, i was wondering what compressor do you use and if you have any recommendation about what to get in terms of size psi cfm etc?
Thanks. I have a big one in my shop and a makita that can keep up with my spray gun. Most guns will tell you their air requirements, just get a compressor that can keep up.
Do you have to do both sides?
What part of Florida?
Gorgeous stuff
That white gooy stuff is the flattening agent that gives it that matt look.
Can you do a video of hownto mix ml Campbell paint and im using a cup gun or donyou prefer anothery sprau gun
A cup gun should work fine. Depending on the size of the tip, you may need to thin a little with lacquer thinner.
@@Truewoods i out 10 percent of lacquer thinner orange peel pop up and I clean the booth somehow dust get on the door
@manorboii9118 I'm not sure, I would suggest practice on scrap pieces until you're happy with the results.
Is there such a thing as a stain and lacquer you can spray all in one go?
Personally I prefer a clear or amber finish to let the natural color of the wood do the talking, but yes, you can tone the lacquer with dye stains. When I do this I prefer to thin it 50% with lacquer thinner and add my color. I spray in between coats of clear lacquer and build my color evenly. It takes good technique to get a even color, so I wouldn't suggest it for anyone not totally comfortable spraying. Better to use a spray and wipe stain then lacquer over it.
How do you get any of the sanding “swirl” marks out before you lacquer?
Use a finer grit. Sanding is 50% of the job, sometimes more.
Beautiful work
Wow... I should have use this years ago, thanks good video
Good job sir . Lovely wood working. I'm of same opinion as you bro Nothing too fancy just getting the job done. And we'll done . That walnut was gorgeous wood.
Did you stain the walnut before the lacquer
No stain
Great demo. Thanks.
Thanks for making this vid. It helped me out a lot.
what company provides lacquer paint???
To prep the piece/wood before spraying, do you just sand and clean it (like with a tack cloth)? Essentially spraying on bare wood? or should you wipe with water, thinner, or something else first?
I sand, blow air to get the dust off, then spray.
What do you do about dust on the piece after you touch sand?
It depends, if it's just lacquer dust a lot of times I just leave it. But sometimes I spray it off with air or you can use a tack rag.
Thank you for a great video! What pressure do you run for the sprayer?
I'm not sure, I just adjust it at the gun for a good spray pattern. I think around 30-40psi
, how long can you leave the mix in the gun cup between coats....do you wipe the sanded surface off ?
In the cup it's good all day, only 15min or so between coats, and yes, I wipe down the surface after sanding. Tack cloths are good, but not always necessary
Thank you for the tips! Im trying to get into wood working so I am still learning how to stain and add finish. Do you ever stain the project before adding the lacquer?
No problem and yes. When staining I like xylene spray and wipe stains. They go on pretty even and dry fast so you can spray lacquer soon after. Oil stain can be dangerous with lacquer adhesion.
@@TruewoodsCould you elaborate a bit more on the oil stain and lacquer combination being dangerous? I’m wanting to spray lacquer over some Dalys stain. Thx
What size spray gun tip do you use?
I'm sure it's not the best, but I use whatever the cheap spray guns I use come with. I visually adjust the fan and if I need to I thin the lacquer to get the spray pattern I like. For big projects I've used my airless and I go with and 8" fan and pretty small opening on that, but on my cup guns it doesn't seem as critical
Just wondering how quickly you go through your laquer and where do you buy your bulk laquer bucket?
What psi do you have the gun set on??
I think somewhere around 30 or less, but each gun is different. I usually start low and turn it up until I get good atomization.
thanks for sharing partner, it is good to have references of the products, a hug brother.
would that be a good product for kitchen cabinets but tinted white?
Perfect for kitchen cabinets!
Any problems spraying lacquer over stained plywood? Anything I should know on my approach to doing this? Thank You.
No problem, but make sure the stain is dry
@@woodzzy1 6 months later. 😂👍🏻
@@tundrawhisperer4821surely dry by now…lol
@@woodzzy1 Yeah, I’ll set up to spray it tomorrow! 😂👍🏻
what tip size do you use?
Good job brother one love,big up jah live
Whats the best finish over stain and paint ? Thanx brother..
If I'm not sure what I'm spraying over I either sand it all off or spray vinyl sealer before my lacquer.
hey, a question please. I am building a skin on frame 10’ boat. The skin I’m using is 9oz Dacron. The typical waterproofing that is used is poly varnish. Three coats are rolled on. What do you think about using lacquer? I have a spray booth and could spray it on.
Is the lacquer at the hardware store representative so I can test it? Hate to put out a bunch of coins for a quart or two if it won’t work.
All of the lacquer I spray is for interior use. Stick with varnish or if you want something more durable awlgrip makes some good wood finishes for marine
@@Truewoods thanks! Good advice.
Hey sir. Or other viewers Wondering if Laquer Matte would be suitable for extra protection on a couple new western cedar Adirondack chairs. I know cedar is excellent At enduring outdoor conditions but at the price of cedar these days , just want extra protection. Thanks for any input guys
Did you sand after your final coat?
After? No. Before? Yes.
Hi Good information, this might sound like a lame question but can you lacquer on top of a water based paint on pine. I have just sprayed an old dresser in a vintage colour and the paint seems soft when scratched. I am looking to protect the paint and make it more durable.. thanks in advance..
I would probably test a sample first, lots of times if I'm not sure what something is finished with and I'm spraying over it I'll use a vinyl sealer then lacquer.
Thanks for the advice.. If i can get that I will give it a go..@@Truewoods
Bought some spray bottles today...matte for sure more suitable...questions is how much protection you get to scratchs and water....
I have issue sometimes my lacquer get cracks. It’s ver annoying to fix. Any advice?
You over spray or over catalyze it
@@woodzzy1I get crack because of wood expansion or contract. Is there any sealer to prevent that? Also what brand you use? And how much are they 5 gal? Also what kinda primer you use?
Looks awesome as usual nice work brotha
Thanks man!
I like it brother. Well done. I may have to try that magnalac
Would you recommend this method for an outdoor table? I'm looking for something that won't scratch to easily & will hold up under the rain
No, it's not for outdoors. Outdoors use oil (tons of options), spar varnish, or for durability I like AwlWood, but it's pricey
I am refinishing a kitchen table top that got some water/mold damage over the years (water got under a plastic table cloth that was rarely moved...). I was debating on what finish to use. I was figuring on a gloss finish, but am undecided between lacquer or polyurethane. My concern is a repeat of moisture damage. Thoughts?
First is what's available and what you're comfortable with. Most products these days are superior to the shellac that was used in the past as far as abrasion, moisture, and chemical resistance. Use what you're comfortable using. My favorite for indoor furniture is matte lacquer, but that's just me. There's also different qualities of lacquer, and you can't brush it on. Home Depot has some pretty good poly brush on finishes. So really it's all up to you
Forgot to mention.... the table, while not "technically" outdoors, lives on an enclosed back porch. It was an actual back porch that we turned into a essentially a "sun room". It can get pretty warm back there in the summer, and cold in the winter, as it's not heated usually.
This is great i hear good things about lacquer my question is what kind of paint do you use under a lacquer topcoat?
Most of the lacquer I use is also a sanding sealer, if your not sure you could spray a vinyl sealer that'll go over anything, or just test it out and see what happens, that's what I like to do.
What type is the mask?
What type of filter/strainer is that? Where do you get them?
Just search for moisture compressor filter on Amazon, should find plenty. I don't remember where I got it or know what kind.
@@Truewoods as dumb as this sounds, I didn't mean the moisture filter. I meant the filter you used to filter the lacquer into the gun.
@@ShinkleGunDog I used to by them at harbor freight when we lived close to one, now I just order them online. Just search for paint strainers
@@Truewoods thanks!
I prefer brushing lacquer myself. It's self-leveling so I don't have to worry about brush strokes and I can catch runs before they have a chance to dry that way. I occasionally restore old radios that were originally finished in lacquer but often I'll have to glue up loose veneer or replace it which never matches the original well, so I'll usually spray on some Mohawk toner to even the color out before I brush on the lacquer. I'm afraid that, with spraying I'd get runs I couldn't really do anything about as it dries so quickly. I usually use a semi-gloss finish. It also doesn't have to be perfect and I think it leaves the radios looking how they originally would have looked new. Another great thing about lacquer is that it is easy to strip the old finish off with lacquer thinner and a bunch of old rags. And I can use cheap brushes to apply it with. I usually go with 0000 steel wool between coats :)
The Lacquer I get is Catalyzed. Has a limited shelf life. Do I need catalyzed? Does the shelf life matter?
My understanding is the longer the lacquer lasts, the less durable it is. Sometimes I spray post cat for durability, mostly I spray pre cat. Shelf life's are different for all of them. Guess it also depends how much you buy and how quickly you're planning on using it.
nice stuff
It is
Where did you buy this brand of lacquer? I don’t see a spot to buy it on their website
It says for "professional use only" I'm pretty sure they only sell to vendors, you'll most likely need to find a cabinet supply shop or paint supply shop to buy from.
What is your opinion on using a 6gal air compressor for spraying with HVLP guns for smaller projects-especially with a psi regulator at the gun?
Most guns will tell you the minimum air requirements, as long as the compressor can keep up it's no problem. I always run a regulator at the gun, and run the compressor at max psi.
You look like Woody Harrelson and I like lacquer easy to work, fix or repair when needed.