You are a star i am a beginer and i thought about scraping this heli could not set it up luky me i found you and could not find a better video i am using a DX6i Keep on the good work
Hi Tony, I left a couple of comments/questions on part 1 regarding binding procedure and here it is in part 3 my bad, I'll just watch all of your tutorials before I have any further questions or comments to ask of or comment on.
So far I've viewed the first three videos of this series and the information you're offering is fantastic. I just purchased a 250GT and being that it's my first build I'm finding these videos very helpful. Thanks for all the detailed info. I look forward to the next one that covers the tail servo and gyro since this is where I seem to be having the most difficulty. Thanks again.
Thanks a lot, you saved me again from throwing my radio across the room, cause of course it was its fault , lol. That darn swash mix had me all messed up again on a new heli. It's all good now so thanks again or posting
I have a small list of instruction manuals on my website. If the manual for your helicopter is not in there, post up in the forum and let us know what manual you are looking for and we will see if we can find it. www.rc-help.com/ams/instruction-manual-downloads.133/
Thanks a lot for making this video. I have two questions for you. Is there any way to make you servos move faster? And also is there a way to increase the servo travel? Thanks!
hello --I bought a fun copter fixed pitch heli---binded it to my dx6i everything operates correctly except the forward --backword on the stick is backworks.cant figure out how to get right---reversed all servos 1 at a time and still does not reverse direction.help please
My right aileron servo stays all the way down when I turn my dx6i on and want move up or down it works when I add power but the arm want move for my swash plate to turn right . Help
Hey tony , I’m trying to set up my trex 600n to a dx7s . Now I have all the servos working together , my throttle and pitch work perfect on the left stick , but my right stick that controls the over all direction of the heli moves in the opposite direction ( if I move the right stick right the Swash moves left , if I pitch the heli forward the Swash moves back ) if I try and reverse and Servos to fix the issue it throws off the controls on the left stick . I’m in desperate need of help ...
In your Tx, I believe the menu is either Swash or Swash Mix. In there you should see 3 settings with a +60 next to them. Those are Aileron, Elevator and Pitch. Pitch is for the left stick and is the collective. Aileron and Elevator are the cyclic. Just take those numbers into the negative and it will reverse the throws. Hope that helps.
@@pawneep20 I am going to need a LOT more information to help you. What receiver, what gyro, what servos, what Tx, are you sure your plugs are plugged in the correct orientation, are you sure your battery is charged, have you bound your Tx to your Rx, are you seeing a low throttle signal... I will stop there. But please post as much info as you can when asking for help otherwise we can't help. www.Rc-Help.com
sorry, it still doesn't work..... Page Not Found The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following:
It will mostly be the same, with some small variations. Unfortunately I do not have the DX6e (or i for that matter) so cannot compare, but we do have a great forum that can assist with your setup. Hope to see you there. And apologies for the very late reply. www.Rc-Help.com
These videos have *ALL* the information I need to setup my first 450 heli. Thanks a lot!
You are a star i am a beginer and i thought about scraping this heli could not set it up
luky me i found you and could not find a better video i am using a DX6i
Keep on the good work
Hi Tony, I left a couple of comments/questions on part 1 regarding binding procedure and here it is in part 3 my bad, I'll just watch all of your tutorials before I have any further questions or comments to ask of or comment on.
So far I've viewed the first three videos of this series and the information you're offering is fantastic. I just purchased a 250GT and being that it's my first build I'm finding these videos very helpful. Thanks for all the detailed info. I look forward to the next one that covers the tail servo and gyro since this is where I seem to be having the most difficulty. Thanks again.
wow......por fin encuentro a alguien que explique bien lo del SP mixing. thanks...
Very helpfull clip. He's talking and learning Is like the professional teachers.
Thank god for this video. Tony your my Swash mix Savior. Hope your well. ZIPPY
Absolutely my pleasure Sketchy! www.Rc-Help.com
Thanks a lot, you saved me again from throwing my radio across the room, cause of course it was its fault , lol. That darn swash mix had me all messed up again on a new heli. It's all good now so thanks again or posting
thanks for the help mate ,i was realy having probs with the dx6i and ccpm setting now im sorted cheers shakainecast
I always watch your videos, and you are the best ! Thank you so much to help us !🤗
It is my pleasure Edgard.
www.Rc-Help.com
Thanks for the video I am trying to find the schematics with the measurements for the links on a 450 you spoke about
I have a small list of instruction manuals on my website. If the manual for your helicopter is not in there, post up in the forum and let us know what manual you are looking for and we will see if we can find it. www.rc-help.com/ams/instruction-manual-downloads.133/
not sure got an extra servo lead say 5 which ive pluged my yellow lead into GREAT VIDEOS
Thank you, happy I could help out. www.Rc-Help.com
Thanks a lot for making this video. I have two questions for you. Is there any way to make you servos move faster? And also is there a way to increase the servo travel? Thanks!
hi ! just wanted to tell you that your forum link in the description doesnt work !
Nice video !
thanks !
thanks mate great video, I have a problem tho, when I push cyclic forward and backwards the swash moves left and right instead, how to adjust that?
thank you very much
You are welcome
Very useful video. Thanks a Lot dear friend.
Hey Rama, thanks for the comment. Glad I could help out. Hope to see you on the forum soon. www.Rc-Help.com
your faithful fan
Hey hope your doing alright! Is there a way to center one single servo? Because my right servo isnt centered but my left one is.
thanks a lot
Welcome!
Hello tell me how to set the idling mode for the engine
my swash plate does not move up and down. What do you think the problem is? advice please! thanks
man your videos are good! :)
hello --I bought a fun copter fixed pitch heli---binded it to my dx6i everything operates correctly except the forward --backword on the stick is backworks.cant figure out how to get right---reversed all servos 1 at a time and still does not reverse direction.help please
Can we use flysky 16x?
How to setting remote and receiver for rc helicopter 6ch?
My right aileron servo stays all the way down when I turn my dx6i on and want move up or down it works when I add power but the arm want move for my swash plate to turn right . Help
Hey tony , I’m trying to set up my trex 600n to a dx7s . Now I have all the servos working together , my throttle and pitch work perfect on the left stick , but my right stick that controls the over all direction of the heli moves in the opposite direction ( if I move the right stick right the Swash moves left , if I pitch the heli forward the Swash moves back ) if I try and reverse and Servos to fix the issue it throws off the controls on the left stick . I’m in desperate need of help ...
In your Tx, I believe the menu is either Swash or Swash Mix. In there you should see 3 settings with a +60 next to them. Those are Aileron, Elevator and Pitch. Pitch is for the left stick and is the collective. Aileron and Elevator are the cyclic. Just take those numbers into the negative and it will reverse the throws. Hope that helps.
RcHelpDotCom my servos aren’t responding
@@pawneep20 I am going to need a LOT more information to help you. What receiver, what gyro, what servos, what Tx, are you sure your plugs are plugged in the correct orientation, are you sure your battery is charged, have you bound your Tx to your Rx, are you seeing a low throttle signal... I will stop there. But please post as much info as you can when asking for help otherwise we can't help. www.Rc-Help.com
RcHelpDotCom I have a dx61 using the Same receiver and servos as seen in the video,I have the stock gyro gy192
@@pawneep20 My best guess is make sure you have the servos and ESC plugged in the correct way. It's easy to plug them in backwards.
Remote flysky fs-i6?
sorry, it still doesn't work.....
Page Not Found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following:
I gota dx6e is it the same
It will mostly be the same, with some small variations. Unfortunately I do not have the DX6e (or i for that matter) so cannot compare, but we do have a great forum that can assist with your setup. Hope to see you there. And apologies for the very late reply. www.Rc-Help.com