FIXING Airbag Warning Screen BMW E60
HTML-код
- Опубликовано: 26 авг 2024
- How to FIX the annoying message :
"Restraint Systems Faulty - Function of airbags, belt tensioners and belt force limiters faulty. Ensure your seat belt is fastened despite the fault!"
on your BMW e60 .
SFZ: Resistance, firing circuit, belt tensioner, driver, too high
Code 9AFF - Safety battery terminal firing circuit resistance too high
BST ( Battery Safety Terminal ) Bypass
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK
Хахах, добре - "This is Bulgaria and we're bypassing everything!" :D
Right from the heart ! :D
Поредният проблем решен благодарение на теб,Братле!!! Поздрави,бъди жив и здрав!!!
Мерси! Радвам се, че все пак на някой му е помогнало
Crank благодаря, пробвах и на е90 и пак стана! Реших да пробвам понеже намерих, че при кодиране на двата модела чисто любителски, съм срещал много сходни неща, дано съм бил полезен.
Колега, днес ми се появи тази грешка, след фолиране на задните стъкла. Нямам представа какво се е случило. Бих искал да се свържа с теб да ми обясниш някои неща. Евала за видеото. Поздрави.
What about 93CF and 93E7 ? .... first time i had only 93CF (impact sensor door front right ) and after the connection cleaning it seems was working until now , what should i check?
What about the seatbelt light that comes on with airbag light ?
Very useful. I am having this error in my e60 M5 . What size ohm resistor should I use to clear this error?
I was thinking to put a resistor, i was not sure but now i am definitely 👍
I did this and it worked without any problem, thanks a lot you saved me a lot of money
Готино видео,но жалко за SFZ (сентрални сътелитен модул)
Позитивния кабел е доста проблемен на Е60 не малко изгоряха, така че за да спестим 200лв. е едно решение,но както казва автора към нищо добро не води,но е евтино и ефективно.
Успехи crank
Very good video, I tried it step by step, and it worked, 🙏
Great video thanks.... What software are you using?
will this work with an e90?
Was the airbag light also on the dash??
I did the same things on my 2006 5.30xi car and used 2 ohm 1/2W resistor. Used Autolink AL 619 scanner to erase the code but it didn`t work. Warning lights and sounds coming back when somebody sits on the passanger seat. Is it the resistor values or the scanner problem? Btw scanner founds the code but when I erase the code it never says the code erased! It is just showing an empty screen. When I check the error codes again it shows no error. But lights and sound is still there. What can it be the problem?
Lmao “ The Carrrrrrr”. 😂
Thank you so much!!
It help me to to to to much.
thank you bro! respect
I needed to take down doorpanel found cables cutted from doorswitch so I removed the airbag also bought a thinkscan scanner
Благодаря за добре направения клим, забелязахме и при наш автомобил същия проблем, ще пробваме и ние да направим Bypass :Д :Д :Д!!!
Мерси ! Имаи предвит , че трябва да използваш резистор точно с това съпротивление , защото иначе няма да сработи .
Благодаря ще го имам предвид!
@@crank3646 Пробвано и работи 100%, благодаря още веднъж!
Имам грешка 98CA.Имаш ли идея какво да направя да изчезне?Благодаря!
Does this work on E90 ?
How turniej off indicator? Fault SBSR code: 991D batterieleitung unplasusibler messwert.
Does this work on fault code 93F9?
Здр. Качих видеото в бмв форум , защото инфото е полезно за много хора с този проблем . Един въпрос само ,има ли значение резистора коя страна за кой кабел се запоява ?
Надявам се да е полезно . Няма значение как ще го запоиш
Please can you write to me wich color resistance 2 ohm
Thanks
Hallo welches Widerstand ist das ?
Hi I was wondering if you can help me out here. I have a 2009 BMW and I want to find out that if it is E61 or E60? And also how can I get that program which you have in this video on your tablet?
Cheers
E60 - sedan , E61 - wagon/combi
You must buy it , with the OBD adapter with it . The name is Launch X431
96CA faul code ???? Was ist das? Bmw e61 530D 2004 160 kw
What car is this my guy
Страхотно клипче! Браво за труда! Ако може и едно кратко обяснение на български ще е чудесно :) Искам да питам: Може ли след като се сложи резистора от 2 ома и 2 вата грешката да се изтрие с Инпа? При мен го има същия проблем и чистя грешката с инпа, но след известно време пак се появява :( Благодаря предварително за отговора! Клипчето може да се пусне в БМВ форума ще е ни е много полезно!
Поздрави!
Здравей ! Мерси за добрите отзиви :)
С ИНПА ще може да . Принципно няма значение от диагностиката , стига да може да се свърже с дадения модул и да достъпи памета с грешки .
naistina mnogo dobra rabota imam sa6tia proble i se 4udia kakvo da napravia
dali nqma kak da obiasni6 na BG kakvo to4no napravi blagodaria...
Unfortunately this did not work for me
... I have a resistor but I don’t think I have that cable to splice into. Are these factory equipped? Can the vehicle operate without it ? Any help is appreciated
I think this should be equipped in any E60 / E61 . Never seen one without it .Yes , it is not a problem to work without it .
Never seen one without it. Maybe it’s been modified would you be willing to help me locate it if I emailed you pictures ?
You did not test the resistance after you soldered the 2ohm resister on the the connector. I did this and found that there is absolutely no resistance as the connector has an internal connection. Thus is doesnt matter what type of resistor you put in, it simply doesnt do anything.
The plug has internal connection , but when you plug it to the connector , the circuit disconnect itself :)
Aha, that would explain it, thank you.
I can put a resistance of 2 ohm 1/4 w?
I have fault codes 93B2 - Battery positive terminal isolation 1
93A9 - Squib circuit belt tensioner driver side
93AA - Squib circuit belt tensioner passenger side
Will this also work to clear those codes?
No it won't help , on this problems
@@crank3646 Thanks for the reply. I should be able to clear the 93B2 code though?
Depends . If they are pending probably , but they will come back eventually , if they are current , no .
hi Crank, bypassing using the resistor, will the airbag and other car system works? what are the cons?
Yes everything will work , except the igniter you are bypassing with the resistor
@@crank3646 thanks. a lot .. hopefully this. will work in my case
Dont work i dont whay😢
I tried this fix. My plug had a loose/faulty connection and I couldn't find two ohm resistor so I put two 1ohm resistors inline but on the car side of the loom not battery side. It worked for a while but light came back on after two months and I couldn't reset it. Then I put only a 1ohm resistor inline. Again warning light would go off but come back when starting in morning . Now I have a 2.7ohm resistor in place. Light has been off for two weeks so far ok. Why do you think light keeps coming back.... temperature change or faulty resistor over time?
Sometimes this error is set by the Passenger Seat Occupancy Mat sensor . I haved success only with 2.0 ohm resistor , anything else set the fault code , 2.2 2.4 etc.
Crank . I have bypassed the passenger seat occupancy sensor aswell as seat belt light for passenger side. I now have 2.7ohm resistor in place for battery bypass. So far it's working
shaz m g
@@crank3646 hey I'm getting a fault for air bags saying control unit fault intermittent..do u think this fix will work for this error. Thanks
Резистора какъв е?
What year is this car? I have 2005 530i and mine doesn’t look the same
If i remember right 2004
alguien sabe como hecer un emulador para sensor de asiento de bmw x3 2005? gracias
manuel perez yo kiero saber tambien
This fault popped at my e63, after couple of minutes it disappeared
What software do you use to connect to your car ?
Its the software from Launch X431
Can Carly clear the fault code after it has been bypassed or what code reader can I use to clear it?
Any code reader should be capable of that
My local independant mechanic wasn't able to clear it last week with his reader which was strange. I was planning on buying a carly unit anyway but this would be an added bonus.
Probably because he was searching the fault code in the airbag module . This error code is in the SFZ satellite module .
Oh, I'll say that to him. Thanks a lot!
This is not worked for me. What can I do to fix this error? e60 2004 525d CCC navi -error message is: "Resistant systems: function of airbags, belt tensioners and belt force limiters faulty, Ensure your seat belt is fastened despite the fault!" If anybody knows a solution for this, please send me a message or reply.
Maybe you have open or shortet wiring somewhere btw the resistor and the module .
Will this work on the E9X platform?
Yes it work!
My çode is 93F9. Can you tell me how to clear that?
That fault is the Airbag Cotrol Module called the SGM/SIM. Sometimes replacing the 2 large capacitors fixes it or else replace the module with a new or used one. If replacing the module, it needs to be reflashed with the car's VIN code.
Yes, your comment is 2 years old but I'm replying in case someone else is reading this. : )
@@DiscoFang but did this DIY also solve the problem?
we are bypassing everything 🤣
so i didn’t understood. In case of an accident the airbag will work or not?
They will work :)
thanks for the video! exactly what i needed and what i’ve been trying to finf and sort out for a week. Will do it tomorrow
Crank 9AFF fault gone by putting the resisor exactly as you showed in the video but 9B01 stays even after coding out both of them and the airbag and seatbelt lights on the dashboard still there. Do you know what else can I try to sort this out?
Can you help me with that?
If the resistor doesn't solve your problem , probably you have somewhere broken wire .
Ami no me funciono en mi e61
Adolfo Montoya ya lo arreglaste ,
?
BMW have invested time and money to come up with a solution in order to make this safer and you are fixing it with a resistance .. at least don't call this a fix but a workaround
Or as I call it "bypass" ?
@@crank3646 bypass is even better
I have this car with this problem and about 100 others. All faulty sensors or units/modules not doing they're job. It is a good safety feature like everything else but bypassing all of them would make the car soooooo much better. In 3 years now all my problems are sensors or something else electrical. I wonder if when I leave A I will get to B everytime I drive it 😖
The battery of the carrrrrrrrrrrrrrrrrr lmao
I'm pretty good with accents, and have lived over seas in several countries, but I literally cannot understand him.
Бате,Бате Не ти се отдава Инглиша 🙂
Много градивен коментар и особенно свързан с темата !!!
You lost me after e60.