2 of my favorite channels: cleetus McFarland, and fab rats recently started showing rc cars on their channel. So I said in the comments to check out your channel and thunder rc also. Thanks man
Wow you have made the Tekno into a flying basher. Awsome display of flying. When you are having fun and laughing with it really inspires me to get out and enjoy messing around. I am up there in years now and I got my first rc in april 2020. Now I have 8 cars and just have a blast with my grandkids. Thank you
Tekno soars through the air like nothing else 💪🚀 glad you're feeling better and enjoying your self, the mental side of stuff can be challenging just as much as the physical aspect.
I have a 2.0 and I take ALL my rc bodies to Linex bed liner. I have them sprayed inside and out. 1/16th of an inch or so on each side. Since the body will be about 3/16s thick, I use proline cap mounting kit. Part number 6070-02. My Linex coverd bodies have lasted for years. Backflips: I run 500 thousand in the center diff ONLY. It more evenly distributes power in the air. Also I prefer duratrax hatchets tires. They balloon alot for backflips and aren't the greatest for high speed, but the tires are more than an inch wider than the rim. So if you land on the side it absorbs a lot of the force. Belted proline trenchers for 1/8 scale have the same protruding sidewalls.They are for extra suspension and cushion on hard concrete landings. I'm in a wheelchair so I go to the skate park all the time to get out of the house. I have all the m2c stuff you have but I love that chassis brace and I'm going to order one! Thanks man nice bash
The techno is sweet. I almost bought one. But for the v5 6s Kraton instead. I believe the rear drive shaft bent. It looked that way at the end of video anyhow. Love your videos. Glad you’re doing good.
Wow your Teckno was flying nice!! That new brace did a good job keeping your front driveshaft straight, but the rear driveshaft was noodled at the end of the video!! Unless that was bent on a previous bash? Glad to hear you've decided to enjoy yourself again!!!🤙👍💯 Have a great new year!!!
Yeah, I didn’t even notice the back was bent until after I got home and was cleaning it up. I don’t know if it was bent from that run or a previous either.
Front end of the techno has literally no protection the shock Tower and front end is totally exposed. But still one of the best looking truggys of all time
Awe brother,,, I am feeling ya on the health issue you have had,,I was just in the ER yesterday checking to see if I had a stroke … man what a coincidence. My thoughts are with you… Your gonna be just fine . You obviously have a great support system in your family and friends.. My results were “ bells pulsy “ so positive considering the alternative.. I’m a subscriber for life brother fyi I’m almost 50 so I can tell we are both not a couple guys in our 20’s anymore right!!?? Well happy new year ..Scott z👍Woodstock Illinois
Well, I’m glad it wasn’t nothing major buddy and I really appreciate that things are healing and I’m feeling better each day just waiting on the results after they removed everything
@@BarstoneRC Hey Tones,, my mom went through that filthy disease in 2006 . And in no way am I bringing my much simpler situation like tit for tat at all . I’m sure you know that ,, it’s just so you know your not alone in your journey , I know what that feels like being occupied with a health issue 100% ✌️On a different note, speaking in Tekno , I JUST ordered the ET 48 2.1nitro version last week 👍👍👍 I am so looking forward to getting her built , gonna keep me busy during the winter out here . I’m jonzin’to run nitro so can’t wait to start. Well thanks for responding back . Good stuff’!🤙🤙
not sure how but you would need mt style shock towers. m2c does arrma mount conversion for the 48.3 chassis style, maybe they would make the towers to accept arrma mounts allowing you to run any mt style body over the towers. as for springs get orange springs all around
I was looking at some different style springs for this thing. I haven’t pulled the trigger yet because I know it’s a little bit soft, but it lands so nice.
Dude she flys so nice and digs a nice hole too lol, that chassis brace has dome a epic job of holding that truck together for sure really sweet upgrade bro 💪🤘👊🤙💯💯💯
Hey nice vid,but better that that I hope u are doing awesome and hope to see u back again in a live stream soon so we can talk to u my,God bless u always 🙏
that thang looks so cool with the white wing! i just ordered a senton 4x2 boost 😂 i am going to put the 4s esc and 6s motor in it with the hot racing gears!!! should be a beast!! hopefully u get a senton ahahah send it to the moon!
Thank you my friend. I hope you had a great Christmas too but yeah it was nice getting out for a couple. bashes before it got really really cold in the surgery. Lol.
I get great backflips out of my 2.0 from just running 4s. With what I've explained in my last comment my 2.0 does standing backflips on concrete or dry grass. It backflips very well. I like to hit the quarter pipe to only get 4 to 5 feet of air and do a backflip. I also run stock spur gear with like a 14 or 15 tooth pinion. Anyway nice video
Yeah, a little more air control wouldn’t be bad but I also like using this car on the ramp launches and using the ramp, I like the air control to be slower but maybe I can find a happy medium
Tekno ... aren't they more of a racing background? Don't know much about them just a thought on the air control compared to stunt trucks....just a thought...
You were asking about a body that covers the front shock tower, the lead finger patriot body on eBay is a trick looking racing body for the 2.0. Also l like the "buggy" body. It doesn't cover the shock tower but it looks good, it's also on eBay. Thanks bro it's too bad the 2.0 isn't more popular for bashing cuz it's my favorite rc car by a mile
Are you able to use the stock body post and move them to the front upper part of the shock tower when you use that body? That’s been my question is how that mounts.
The patriot body by leadfinger racing fits it perfect I own one and it’s not my favorite it’s way to slim and it looks like a bug lol I’ve also been looking for a different body I might try the bruggy body by leadfinger it’s similar to the stock body but a bit different design And yes you can move the body posts to the top of the shock tower
Yeah, I’ve heard a few people talk about that I like the suspension and the shocks on this thing and it wasn’t a huge surprise. I broke the shaft from flat landing and a half pipe. Lol
What truck do you prefer ET48 or Sledge? Which handles better? Which has a sharper turning radius - What truck is more durable stock Sledge or Stock Tekno?
The tekno definitely handles, better steer sharper and overall control as far as durability. Once you put the center brace on the tekno I would say they’re pretty comparable as far as Durability
2 of my favorite channels: cleetus McFarland, and fab rats recently started showing rc cars on their channel. So I said in the comments to check out your channel and thunder rc also. Thanks man
I appreciate that my friend I know thunder pretty well. He’s a great dude and has some awesome content.
Wow you have made the Tekno into a flying basher. Awsome display of flying. When you are having fun and laughing with it really inspires me to get out and enjoy messing around. I am up there in years now and I got my first rc in april 2020. Now I have 8 cars and just have a blast with my grandkids. Thank you
Going out with these cars always bring such a big smile and fun every time and I’m glad my fun helps inspire you to have a good time with them also.
Tekno soars through the air like nothing else 💪🚀 glad you're feeling better and enjoying your self, the mental side of stuff can be challenging just as much as the physical aspect.
Yeah, luckily I got to get out and have some fun before the surgery but I’m recovering well
I have a 2.0 and I take ALL my rc bodies to Linex bed liner. I have them sprayed inside and out. 1/16th of an inch or so on each side. Since the body will be about 3/16s thick, I use proline cap mounting kit. Part number 6070-02. My Linex coverd bodies have lasted for years. Backflips: I run 500 thousand in the center diff ONLY. It more evenly distributes power in the air. Also I prefer duratrax hatchets tires. They balloon alot for backflips and aren't the greatest for high speed, but the tires are more than an inch wider than the rim. So if you land on the side it absorbs a lot of the force. Belted proline trenchers for 1/8 scale have the same protruding sidewalls.They are for extra suspension and cushion on hard concrete landings. I'm in a wheelchair so I go to the skate park all the time to get out of the house. I have all the m2c stuff you have but I love that chassis brace and I'm going to order one! Thanks man nice bash
Thanks for all the info buddy I’ll check out that stuff. I appreciate it and have a happy New Year’s!
What a killer truck , love seeing that fly
Best thing I did was turn this into basher. Truck is a blast
@@BarstoneRC awesome ! One day would love to add a tekno and run it on my bmx track and get it on the channel 🤘🏻
Great video bro again that tekno is so cool
Yeah, it was nice not bending or blowing out the driveshaft like I did up at your BMX track lol
What an amazing run, some SICK AIRS David 😱😱😱😱😍😍😍
Thank you buddy and I appreciate you stopping by but yeah this car has been a lot of fun now
Hey bro Merry Christmas, your surgery I hope went very well for you everything will be good brother get well soon
Things are going good buddy in healing up well, I appreciate it
Thx for the great vid. Sending Prayers your way take care
Thank you too
Thing flying like a champ
Yeah, this brace made a huge improvement to this car
@@BarstoneRC that's awesome cuz I know how much you like that thing and what I got to see of it it's amazing my first full build 🤦🏻♂️
Fun looking truggy, I bet it’s a blast.
Glad to hear your feeling like yourself more and more brother that’s good to hear.
Yeah, things are healing well can’t wait to get back out and have some more fun again
Awesome bash session. 👍
Thank you buddy
Wow .Mr Tones that machine was Cloudbusting,big air with a grace only the Tekno has.Its on my list.✌️
It really is an awesome car. I really enjoy this thing.
The techno is sweet. I almost bought one. But for the v5 6s Kraton instead.
I believe the rear drive shaft bent. It looked that way at the end of video anyhow.
Love your videos.
Glad you’re doing good.
Yeah, it did get bent. I’m not even sure if it was from this run or a previous one. I didn’t notice it till I was cleaning up at the end of the day.
Nice rig!! I might pull the trigger on one to go with my m t 410
I’m really thinking about building one of those myself
Sweet rip buddy tough as nails now just like you my friend. 🙏for ya.💪👊✌️
Yeah, this car has been eating this and now I think it’s pretty good at this point. But thank you my friend.
Wow your Teckno was flying nice!! That new brace did a good job keeping your front driveshaft straight, but the rear driveshaft was noodled at the end of the video!! Unless that was bent on a previous bash? Glad to hear you've decided to enjoy yourself again!!!🤙👍💯 Have a great new year!!!
Yeah, I didn’t even notice the back was bent until after I got home and was cleaning it up. I don’t know if it was bent from that run or a previous either.
Front end of the techno has literally no protection the shock Tower and front end is totally exposed. But still one of the best looking truggys of all time
Yeah, there’s not any real protection there yet. I hardly have any issues with it.
Awe brother,,, I am feeling ya on the health issue you have had,,I was just in the ER yesterday checking to see if I had a stroke … man what a coincidence. My thoughts are with you… Your gonna be just fine . You obviously have a great support system in your family and friends.. My results were “ bells pulsy “ so positive considering the alternative.. I’m a subscriber for life brother fyi I’m almost 50 so I can tell we are both not a couple guys in our 20’s anymore right!!?? Well happy new year ..Scott z👍Woodstock Illinois
Well, I’m glad it wasn’t nothing major buddy and I really appreciate that things are healing and I’m feeling better each day just waiting on the results after they removed everything
@@BarstoneRC Hey Tones,, my mom went through that filthy disease in 2006 . And in no way am I bringing my much simpler situation like tit for tat at all . I’m sure you know that ,, it’s just so you know your not alone in your journey , I know what that feels like being occupied with a health issue 100% ✌️On a different note, speaking in Tekno , I JUST ordered the ET 48 2.1nitro version last week 👍👍👍 I am so looking forward to getting her built , gonna keep me busy during the winter out here . I’m jonzin’to run nitro so can’t wait to start. Well thanks for responding back . Good stuff’!🤙🤙
That car is an absolute blast. I’m sure you’ll enjoy it. Happy New Year’s buddy!
Good to see another video by you. How you holding up? Great I hope.
Things are healing up and I’m feeling better each day. Thanks for asking buddy.
This is one of my favourite Rcs that I own 👍👍👊🏻👊🏻
This thing is just a blast and really durable
not sure how but you would need mt style shock towers. m2c does arrma mount conversion for the 48.3 chassis style, maybe they would make the towers to accept arrma mounts allowing you to run any mt style body over the towers. as for springs get orange springs all around
I was looking at some different style springs for this thing. I haven’t pulled the trigger yet because I know it’s a little bit soft, but it lands so nice.
Dude she flys so nice and digs a nice hole too lol, that chassis brace has dome a epic job of holding that truck together for sure really sweet upgrade bro 💪🤘👊🤙💯💯💯
Yeah, this brace is exactly what I was looking for and completely turns this car into a proper basher.
@Bars&tone RC good glad to hear it bro, how u feeling now?
For your steering I would check you toe angle when the servo is centered, maybe left tire is slightly toes out too far
I’ll check that out
Last I seen they're about 350 on amain/hobbytown
Bro great video once again I keep watching this I really want a Tekno et482.0
This thing went from a pure race car to one of my most loved bashers
@@BarstoneRC that’s awesome. Did you make any Changes to help the air control ? Or just get used to it
Nope just the tires and using it.
@@BarstoneRC right on! And they’re pretty stiff and durable right out of the gate eh?
Hey nice vid,but better that that I hope u are doing awesome and hope to see u back again in a live stream soon so we can talk to u my,God bless u always 🙏
Yeah, I might do a live stream in the next day or two. Thank you my friend and I’m healing well
Depending on the wheel ase you might be able to get either serpent or hobao sst to fit, but you'll likely need different front body mounts
that thang looks so cool with the white wing! i just ordered a senton 4x2 boost 😂 i am going to put the 4s esc and 6s motor in it with the hot racing gears!!! should be a beast!! hopefully u get a senton ahahah send it to the moon!
Yeah, I think it’s time for another ultimate beater RC lol
i love building them
That was 90% of the fun was just building and working on it
Jconcepts got truggy bodies, you would need the mt410 front mounts. Also kraton bodies work, i use a proline basher body for the kraton on my mt410.
OK, so the stock body post can’t be reversed?
@@BarstoneRC if they sit bellow the shock tower, then no. If they extended above then it should
@@BarstoneRC the Mt ones go on top of the shock tower
Kinda thought bent shaft on that first nose stack. WOW Nope just kept going having fun 🤘😎
Happy holidays bro great bash 👊🙂
It’s a tough bugger for sure
All the truggy bodies that fit the 48.3 fit the 2.0. NT48,et48 and the j concepts/led finger bodies
Good to know. Thanks
What up, Bars!?! I hope you and the family had a wonderful Christmas. Glad to see your ripping even in the bitter cold, brother. Lol🤪💯👍👊❤💥🤘
Thank you my friend. I hope you had a great Christmas too but yeah it was nice getting out for a couple. bashes before it got really really cold in the surgery. Lol.
I get great backflips out of my 2.0 from just running 4s. With what I've explained in my last comment my 2.0 does standing backflips on concrete or dry grass. It backflips very well. I like to hit the quarter pipe to only get 4 to 5 feet of air and do a backflip. I also run stock spur gear with like a 14 or 15 tooth pinion. Anyway nice video
Yeah, a little more air control wouldn’t be bad but I also like using this car on the ramp launches and using the ramp, I like the air control to be slower but maybe I can find a happy medium
Get the bezgar wild $200 basher or that ramp
I’ll have to look that up
Tekno ... aren't they more of a racing background? Don't know much about them just a thought on the air control compared to stunt trucks....just a thought...
They are more built for racing, but with this center brace there, one of the toughest bashers out there
You were asking about a body that covers the front shock tower, the lead finger patriot body on eBay is a trick looking racing body for the 2.0. Also l like the "buggy" body. It doesn't cover the shock tower but it looks good, it's also on eBay. Thanks bro it's too bad the 2.0 isn't more popular for bashing cuz it's my favorite rc car by a mile
Are you able to use the stock body post and move them to the front upper part of the shock tower when you use that body? That’s been my question is how that mounts.
Yes, the et48.3s stock body kinda fit if you do that but I have heard from a few people that some bodies for the 2.0 require doing that.
Rear drive shaft is bent a little but great bash.
Yeah, I tapped it straight afterwards. I didn’t even notice it until I was going over it at home.
What a beast
Your ET for some reason looks like a killer basher than a race truggy 😂 awesome rig brotha🤙🤙🤙
This thing is absolutely awesome as a basher
The patriot body by leadfinger racing fits it perfect I own one and it’s not my favorite it’s way to slim and it looks like a bug lol I’ve also been looking for a different body I might try the bruggy body by leadfinger it’s similar to the stock body but a bit different design
And yes you can move the body posts to the top of the shock tower
Did you use different body posts to use that body?
On the Outcast 4s I hear that Mojave 6s shocks are the way to go.
Yeah, I’ve heard a few people talk about that I like the suspension and the shocks on this thing and it wasn’t a huge surprise. I broke the shaft from flat landing and a half pipe. Lol
if they had one as big as the xl id grab one
Do you still have the stock springs on it? I know Orange springs are the way to go for bashing if they make em for the 2.0 :)
Yeah, I still run the stock. I’ve been happy with the suspension.
Where did you find that center brace. I looked up all brace and it came up with a dentist office
The link is in the description of the video
Maybe you should try the mt410
I’m really considering getting one
@@BarstoneRC Don't consider man! GET ONE!! They...are....awesome!
What truck do you prefer ET48 or Sledge? Which handles better? Which has a sharper turning radius - What truck is more durable stock Sledge or Stock Tekno?
The tekno definitely handles, better steer sharper and overall control as far as durability. Once you put the center brace on the tekno I would say they’re pretty comparable as far as Durability
@@BarstoneRC thanks for the response. Best wishes on a healthy recovery!
Thank you my friend I appreciate it
jconcepts tekno et48 2.0 truggy bodies
great video brotha
Appreciate it
Leadfinger racing body
Is there a special body post to relocate to the shock tower?
@@BarstoneRC the same mounts have to be relocated on the top of the shock tower
Thanks!!
You are sending it
Thanks!!
I got an OMG servo with 25t
Can you adjust the voltage going to it for it to work faster?
From 7.4 to 8.4b?
From 7.4v to 8.4v
Depends on your ESC if it can do it?
@@BarstoneRC
It’s a blx100
Rear shaft bent.
Very very slightly
Does m2c make shock towers for tekno also anyone make aluminum bulkheads? I been binge watching videos on tekno that thing jumps nice!
I haven’t found any, but I haven’t looked that hard either.