شكراً جزيلاً على هذا العمل الرائع .. وهذا ماكنت أبحث عنه وقد طورت مشروعك القديم بإضافة جرس قبل التشغيل للمضخة وقبل أطفاؤها وجعلته يقيس الوحدات بالنستمتر بدلا من الانتش وقد ضفت مكتبة الألتراسونيك له .. ولكن لدي سؤال لماذا استخدمت الواي فاي esp32 بدلا من الآردوينو مالذي يفرق ومالفائدة منه
Thank you very much for this wonderful work.. This is what I was looking for. I developed your old project by adding a bell before turning on the pump and before turning it off. I made it measure units in centimeters instead of inches. I added the ultrasonic library to it.. But I have a question. Why did you use Wi-Fi esp32 instead of Arduino? What makes the difference? And the benefit of it
I also made this project but mine was much simpler....I just used the distance formula for Ultrasonic sensor no need for calibration worked fine for any tank
you are right bro but some sometime sensors are placed above over flow of the tank and the are different heights of the tanks so fore accurate percentage of the level calibrations is needed
لدي سؤال ياصديقي ما إسم البرنامج الذي تستخدمة دائما بالرسم وترسم به المخططات باللون الازرق هل يمكنك إخباري به وهل هو يعمل على الويندوز أم نظام آخر وشكرا ❤❤❤
I have a question, my friend, what is the name of the program that you always use to draw and draw charts in blue? Can you tell me about it and does it work on Windows or another system? Thank you ❤❤❤
Nice work, which I2C library did you use for the LCD, when i compile the code it fails on the lcd.begin so i changed it to lcd.init and it compiles but the lcd backlight flashes therefore i don^t think i'm using the right lib...thx
sir i like your project very much but i can't start atleast 20 times trying, water level shows 100% not changing, ultrasonic sensor is good but still not changing, and can't enter setting push button not working, I will be benefited if you give me suggestion.
Thanks for the project but it doesnt seem to be practical, bcoz overhead tanks are usually at 2nd 3rd or even higher floors, so how can we see the lcd? it would be nice if you add wireless connectivity using nrf modules.
شكراً جزيلاً على هذا العمل الرائع .. وهذا ماكنت أبحث عنه وقد طورت مشروعك القديم بإضافة جرس قبل التشغيل للمضخة وقبل أطفاؤها وجعلته يقيس الوحدات بالنستمتر بدلا من الانتش وقد ضفت مكتبة الألتراسونيك له .. ولكن لدي سؤال لماذا استخدمت الواي فاي esp32 بدلا من الآردوينو مالذي يفرق ومالفائدة منه
Thank you very much for this wonderful work.. This is what I was looking for. I developed your old project by adding a bell before turning on the pump and before turning it off. I made it measure units in centimeters instead of inches. I added the ultrasonic library to it.. But I have a question. Why did you use Wi-Fi esp32 instead of Arduino? What makes the difference? And the benefit of it
esp32 is more powerful and low-cost as compare to arduino
iot capability is also there with esp32
excellent sir i development with microcontroller type (pic 16f84) and added to it solenoid valve .......Thanks again
I also made this project but mine was much simpler....I just used the distance formula for Ultrasonic sensor no need for calibration worked fine for any tank
you are right bro but some sometime sensors are placed above over flow of the tank and the are different heights of the tanks so fore accurate percentage of the level calibrations is needed
Can you share your code
لدي سؤال ياصديقي ما إسم البرنامج الذي تستخدمة دائما بالرسم وترسم به المخططات باللون الازرق هل يمكنك إخباري به وهل هو يعمل على الويندوز أم نظام آخر وشكرا ❤❤❤
Proteus
I have a question, my friend, what is the name of the program that you always use to draw and draw charts in blue? Can you tell me about it and does it work on Windows or another system? Thank you ❤❤❤
I use MS PowerPoint
Programming aur upload kyase karna uspar video haai kya ?
project zip has the code link is in description
Nice work, which I2C library did you use for the LCD, when i compile the code it fails on the lcd.begin so i changed it to lcd.init and it compiles but the lcd backlight flashes therefore i don^t think i'm using the right lib...thx
Arduino-LiquidCrystal-I2C-library
@@KiyanisLab 🥰
اسلام علیکم بھائی گڈ پروجیکٹ اور اگر آپ اس کو موبائل سے بھی کنٹرول کروا دیتے تو ویری گڈ ہو جاتا(esp32)
jaldi karo ga bhai
The project idea is really cool...
BUT have a problem...
and the problem is called HUMIDITY
solution waterproof ultrasonic sensor same connections same working
sir i like your project very much but i can't start atleast 20 times trying, water level shows 100% not changing, ultrasonic sensor is good but still not changing, and can't enter setting push button not working, I will be benefited if you give me suggestion.
Sir please help me 🙏🙏🙏🙏 I am waiting for your suggestion
Super project sir
Интересный проект!
Sir,agar tank bada hoga 10 feet ka to kaise program kare ??
Thank you so much for sharing
Thanks for the project but it doesnt seem to be practical, bcoz overhead tanks are usually at 2nd 3rd or even higher floors, so how can we see the lcd? it would be nice if you add wireless connectivity using nrf modules.
soon ill add it
@@KiyanisLab thanks cant wait!
Can we use Arduiono uno in this project?
❤
Goodjob
Please explain the code
Esp32 home smart wifi Bluetooth ir remote or manual switch
ok bro soon
Hi sir im facing error wile verifying the code it shows " no matching function for call to 'liquidCrystal_I2C::begin()'
Using init()
Sir 24 volt DC in 24 v dc out both side transistor control circuit bna din plz mujy zrorat hai us ki puls b adjust ho
kis kaam k liye chaye
@@KiyanisLab 2 coil hain 24 volt DC on ko 1 second k wakfay sy on of on flip flop krwana hai
Sir plz tell how much depth this sensor can sense.
15 feet
@@KiyanisLab sir can this sensor work in humid areas.
With wire sensors please
ओवर लोड प्रोटेक्शन नहीं है, (CT लगानी चाहिए थी)
Hello sir, may i know how do I contact you?
fb or insta
hai sir
code this probleam details sir -
suggest parentheses around comparison in operand of '|' [-Werror=parentheses]
Plz help
Hello
can we use esp8266 ?
Makimg supply 0 to 60v dc 20amp plese
Change sensor jsn sr04T use sensor yes/no
yes
how can see in mobile'
Hi friends
Aoa
Nice
Can you upload your project code ?
check the project zip In the description
sir help
I need circuit diagram
check the description
Water level Code. Sand pls
this project use arduino uno
ruclips.net/video/bUqXqDCKpgI/видео.htmlsi=ZfFR9UbUhPBTuU7g
outseal plc buld one
ok bro soon