Oh, and if anyone has, like me, a bunch of 1.5mm props sitting around, I was able to drill the center hole out using a 5/64ths twist drill(1.98mm) and still friction mount them. Though I used the screws still. (I like more pitch than the stock props for freestyle.)
@@JoshuaBardwell did you burn out your aio also? Lol. I definitely went a little too tight on the first aio and shorted it out some how. Only get first three beeps now. And I'm 100% it wasn't my soldering job as everything was good before I stacked it together and tightened the nuts. Thankfully I got that aio almost half price during a blowout sale. I had a back up ready to go.
Is someone able to help me? I have a FC with a "MambaF405" firmware target and every time I try to flash it, it gets halfway through and then the port closes and it doesn't progress from there. Windows says that the USB device is not recognized, and I don't know what the proper method would be for getting the right drivers. I have tried Zadig so far but no luck. Any help is appreciated 😊
@@Adam_Carbone it makes it so when it goes into boot loader the computer can still talk to the fc because it’ll now have the correct driver. Let me know if that helps
If u flash bluejay and your quad dies it be great if u could reply this . I'd been flying mine for years with no prob till I flashed bluejay . After 3 flights now it's dead thx
I am just finishing up the tiny trainer V2 Hdzero. I am using the happymodel ep2 reciever and that Aion nano 2.4ghz module on the Zorro. I have updated the firmware if both the module and the Rx with the same 2.5 version of elrs. Same binding phrase and settings. The radio picks up telemetry fine and the RX shows bound. I'm using uart 3 and have that set to serial Rx. Unfortunately I'm not seeing any stick movement on my channels in betaflight. Any help would be much appreciated!
@@baggszilla I agree, I have had errors when running all at the same time but not one at a time so best to test all possibilitys. Run each on its own and then all at the same time.
I gave JB that red electrical tape at Rampage 2021 & he is still annoying you by using it 🤣😂 yaaaas ! 16:45 But me I'm more annoyed that you didn't show us the flight 😒 🙄 😆
You can definitely do some freestyle with it as long as you're used to flying with a high camera angle. The stock camera mount is like 45 degrees minimum.
WHAT. You might not make the flight video! I don't even have a tiny trainer but I do have HDZero. I have watched all the way through both videos for the flight footage and now you say you might not make it. 😢 I want to see you rip that thing in HD.
Do the flight video!! HDZero on the TinyTrainer is really good. When I began practicing with HDZero, didn't seem like a great improvement over analog but I liked the fixed latency, is just like analog, predictable. I broke my Vtx and had to go back to analog... the first 5 packs my brain was crying for the lack of definition in the image. The main advantage I noticed for the "racing" I do, is that because the image is more clear, I feel more in control of what the quad is doing. All that to say, you should tried :)
Thanks!
Make a video comparing the analog quad vs hdzero quad
Wow, that tune is fantastic. Thanks for finally pushing me onto the release candidate build.
Oh, and if anyone has, like me, a bunch of 1.5mm props sitting around, I was able to drill the center hole out using a 5/64ths twist drill(1.98mm) and still friction mount them. Though I used the screws still. (I like more pitch than the stock props for freestyle.)
JB has a video for everything.
For that i’m thankful!
Thanks JB! I def wanna see an analog vs hdzero comparo.
Yes a video comparison between analog and HDzero would still be interesting
Love the video as usual. Would love to see the comparison video between the two
Make the damn video! I came here just to see your reaction upon first flight with this! Don’t leave us hangin’ bro!
There's a reason I couldn't include flight video 🙁
@@JoshuaBardwell obviously now we’re all curious as to what that reason is…
DJI/Caddx/walksnail/fatshark paying you not to? 🤪😜
@@JoshuaBardwell did you burn out your aio also? Lol. I definitely went a little too tight on the first aio and shorted it out some how. Only get first three beeps now. And I'm 100% it wasn't my soldering job as everything was good before I stacked it together and tightened the nuts. Thankfully I got that aio almost half price during a blowout sale. I had a back up ready to go.
A tip.. I cut a rectangle acrylic sheet to hold down the ufl by making a bridge bolted between the two vtx bolts.. i do this on my naked vistas
Definitely would enjoy a comparison of the two just for fun
We need more Bardwell racing videos!
So yes, please do a flight review of the hdzero tiny trainer :)
Still waiting for the flights and comparisons-video for this one, JB! 🤩🤩🤩
Great video!
Please make the flight video. 🙂
What is the white straw at the back?
Edit: Ohhh, it’s the turtlemode thingy!
Is someone able to help me? I have a FC with a "MambaF405" firmware target and every time I try to flash it, it gets halfway through and then the port closes and it doesn't progress from there. Windows says that the USB device is not recognized, and I don't know what the proper method would be for getting the right drivers. I have tried Zadig so far but no luck. Any help is appreciated 😊
Download the impulse rc driver fixer and run it with your fc plugged in and that’ll solve your issue 😁
@@Kartwheelfpv Yeah I was looking into that, is it a safe/trusted application because it always shows up with the window defender blocking it
@@Adam_Carbone yes it’s safe a lot of people have used it tons, it fixes the boot driver. That’s why your having issues flashing
@@Kartwheelfpv Okay thanks for letting me know! Do you know exactly what it does to fix the issue? My board does go into DFU mode already
@@Adam_Carbone it makes it so when it goes into boot loader the computer can still talk to the fc because it’ll now have the correct driver. Let me know if that helps
Make it!!!!!!! Thank you for the content!
Does the tune for this quad increase or decrease performance?
Nice. Let's see the flight video!
If u flash bluejay and your quad dies it be great if u could reply this . I'd been flying mine for years with no prob till I flashed bluejay . After 3 flights now it's dead thx
Yes. Let's see it fly !
I am just finishing up the tiny trainer V2 Hdzero. I am using the happymodel ep2 reciever and that Aion nano 2.4ghz module on the Zorro. I have updated the firmware if both the module and the Rx with the same 2.5 version of elrs. Same binding phrase and settings. The radio picks up telemetry fine and the RX shows bound. I'm using uart 3 and have that set to serial Rx. Unfortunately I'm not seeing any stick movement on my channels in betaflight. Any help would be much appreciated!
You should probably email me so we can discuss it.
To confirm the error is truly 0 using dshot 600, aren’t you supposed to spin the motors up?
Yeah I would have spun the motors up to see if any errors. Usually F4 FCs running RPM Filtering you run DShot300. JB ran DShot600 OH Oh
@@baggszilla I agree, I have had errors when running all at the same time but not one at a time so best to test all possibilitys. Run each on its own and then all at the same time.
That's why JB said in the video "Let's take it for a rip to see what we missed in the configuration" lol
I gave JB that red electrical tape at Rampage 2021 & he is still annoying you by using it 🤣😂 yaaaas ! 16:45
But me I'm more annoyed that you didn't show us the flight 😒 🙄 😆
Well, there's a reason for that. Maybe it will be a subkect if a future video.
Upgraded to the Axisflying Thor Elrs module, its very refined and 1 watt also!👍
And even better with dji and cutting relief for extra stack height?
Is this build for racing only or can do some freestyle as well?
You can definitely do some freestyle with it as long as you're used to flying with a high camera angle. The stock camera mount is like 45 degrees minimum.
Great tutorial! I'm surprised you didn't use the Preset for HDZero to set the port and MSP out
Great break down. Thanks JB
whats the AUW with a 3s lipo?
This build makes me wish I had switched to hdzero and elrs
3 month left. d&mn, where is part3??? 😔
Fantastic work, Joshua! Thanks for all the tips! 😃
I'm definitely looking forward to the flight video!
Stay safe there with your family! 🖖😊
I say do the comparison and leave bf 4.2 on the analog. Then update it so you have multiple variables to cover on a small racer. Lol
Dude, I enjoy red tapes because of you ahahaha
Im seeing problems coming out of dat beta aio🤐
Woooot! Let’s do this…🤓
Please, make that video on flying that
Great video
Why not 500hz?
Probably because you get a lot more range
OMG, you have to make the video actually flying the thing!
Missing fly the quad 😭
Seriously… really….. it wouldn’t be a JB build without the red electric tape.
Only came here for the flight dang gabbit
WHAT. You might not make the flight video!
I don't even have a tiny trainer but I do have HDZero. I have watched all the way through both videos for the flight footage and now you say you might not make it. 😢
I want to see you rip that thing in HD.
There's a reason there's no flight video. It'll be the subject of a future video.
@@JoshuaBardwell Great news :)
Make it!
Someone go to JB's local home Depot and hide all the red electrical tape!
Electric tape is almost best fiber tape
Do the flight video!! HDZero on the TinyTrainer is really good. When I began practicing with HDZero, didn't seem like a great improvement over analog but I liked the fixed latency, is just like analog, predictable. I broke my Vtx and had to go back to analog... the first 5 packs my brain was crying for the lack of definition in the image. The main advantage I noticed for the "racing" I do, is that because the image is more clear, I feel more in control of what the quad is doing. All that to say, you should tried :)
You got rid of your DJI setup because the variable latency was holding back your “racing”?
No, I have 3 quads with DJI. I liked for cinematic and exploration flying.
NOOOO!!!!!!1!!! NOT THE ELECTRICAL TAPE?!?
You could at least use black tape lol
make ittttttttttt
1st
Make the video
Thanks!
Make the video