Это видео недоступно.
Сожалеем об этом.
2015 BASE 370Z PADDLE SHIFTER INSTALL(1/2)
HTML-код
- Опубликовано: 6 авг 2017
- 2015 BASE MODEL 370Z WITHOUT PADDLE SHIFTERS (SWITCHES). THE INSTALL SHOWS EVERYTHING TO MAKE YOU BASE MODEL INTO AN EQUIPED PADDLE SWITCH 370Z. WATCH THE WHOLE VIDEO FOR ALL QUESTIONS YOU MAY HAVE. THE BEGINNING OF THE VIDEO IS EVERYTHING YOU WILL NEED TO INSTALL YOU PADDLE SWITCHES. THERE ARE TWO VIDEOS FOR THE INSTALL, CHECK THE OTHER ONE OUT.
TOOLS / PARTS:
10MM SOCKET, WRENCH, EXTENSIONS
PHILLIPS AND FLATBLADE (SMALL OR THIN IS BEST) SCREWDRIVER
TWO M6 NUTS
TWO M6 X 1/2" BOLTS
FOUR 1/4" (OR METRIC) WASHERS
THREAD LOCKER 242 OR 243 (OR LOCK WASHERS)
PADDLE SHIFTER / SWITCH
LOWER STEERING HOUSING / COVER
This may help y’all
nissan.worldoemparts.com/oem-parts/nissan-lower-column-cover-484701ea0a?origin=pla&gclid=EAIaIQobChMI1Mfr_Kqe7AIV8hplCh3pHQ2kEAQYDCABEgKC0vD_BwE
One of the easiest, least expensive, most impactful mods you can make if you have a base Z. Took me less than an hour and completely changes how you can drive the vehicle.
Can you still use this on a quick detach steering wheel?
Unsure exactly how the qd hooks up but I’d say the steering column remains unless the entire steering shaft is altered. The qd should just bolt in between the steering column and the steering wheel I suspect; if that’s the version then yes it will work. The paddles attach to the steering column but with a qd the paddles maybe spaced a bit further than normal from the wheel due to the mechanism.
Alright thanks man
Oh one more thing, sorry to bother you again but do you need the car to come as automatic Or can you just buy a manual and still attach the paddles
Mrawesomeness5 it has to be automatic. Anything (automatic) before 2015 came with paddles stock and anything after 2015 it was an option (if my memory serves me correct).
Alrighty then, thanks for the help, although on second thought I might just drive stick, nice video though👍👍
Can you drop a link for what you used or a list of specifics parts you need Thanks
The purchase of the paddles were used from eBay and the lower was eBay too if I remember correctly. The hardware was from a kit I had from motorcycle needs when I use to dirtbike.
Metric screw kit $10+ (I believe it was a m6 for the paddles but the kit is best to have since it comes in handy)
2x 370z Paddles (bolts needed unless purchased with them)
Automatic Lower plastic steering column cover (it has the cutouts for the paddles)
Tools 🧰:
Panel removal tool
Screwdriver
Socket set (metric), Socket ratchet - depends if you get hex, socket or a screwdriver head bolt kit.
Time and action- sold separately 😁
Thank you!
You think this will be the same for the Altima s 2017
Probably the same layout and how everything hooks up but not sure if the harness is already there and I doubt the paddles are the same.
Is it possible to do the same process on a 350
Do they have paddle options for the 350z autos? The won’t fit the 350z if it’s possible due to the plugin and shrouds if I had to guess. If some 350s have a paddle option for the autos definitely pull the shroud to see if the plugs are there. Typically they have these plugs because it’s cheaper to make one wire harness instead of keeping track of multiple part numbers (part numbers = $$$ in the manufacturing world, more Realestate, service for 10 years, etc.) due to how many model vehicles a brand makes.
Where did you buy those parts? Need then so bad
Yukang Zhang paddle shifters used on eBay for $250 or $300 if I remember correctly and the plastics from Nissan website for $80 shipped since they did not have them on eBay used. Z1 Motorsports has it for 100. You only need the lower shroud with the slots, your local Nissan shop should also have these parts if you buy all new. Hope this helps.
PROJECT ANUBIS thank you so much !!!
Where’d you get the new housing ?
It’s been awhile since I looked into it but I replied a few times in comments below on this topic- Fwrd: Yukang Zhang paddle shifters used on eBay for $250 or $300 if I remember correctly and the plastics from Nissan website for $80 shipped since they did not have them on eBay used. Z1 Motorsports has it for 100. You only need the lower shroud with the slots, your local Nissan shop should also have these parts if you buy all new. Hope this helps.
nissan.worldoemparts.com/oem-parts/nissan-lower-column-cover-484701ea0a?origin=pla&gclid=EAIaIQobChMI1Mfr_Kqe7AIV8hplCh3pHQ2kEAQYDCABEgKC0vD_BwE
Do you think this will work on a 2020 370z?
More than likely yes. Take the lower shroud off and see if the wires are there. The reason I’d recommend checking is because every so often things will change in the assembly line. It’s more cost effective to add the wires since it would cost more to make a new part number and keep track of a wire harness with and without two additional connections. real-estate for part locations, changing setups and diagrams (engineering time) are expensive in a factory in a business sense.
Curious did you ever find out if the 2020 had the harness on it already ? Asking because I’m boutta pull a trigger on a 2020 without paddle shifters 😅