Это видео недоступно.
Сожалеем об этом.
GTI Dogbone Mount & Insert Install
HTML-код
- Опубликовано: 30 июн 2021
- ➡️Dogbone Mount & Insert. -bit.ly/GTIMoto...
shop carmaspeed gear - carmaspeed.com/
awesome amazon list of tools & necessities -bit.ly/toolsfro...
How to put your GTI on jack stands - • How To Raise a Volkswa...
More Content -
carmaspeed podcast - / @cameronalfordbonus
Cameron Alford 2 Channel - / @motowithcam
Disclosure: This video includes affiliate links, meaning I may receive a commission for purchases made through these links at no additional cost to you. This helps support the channel and allows us to continue to make content like this. Thank you for your support!
I appreciate you doing these on the ground... Which is where most people will do it! Respect
Im glad I found this channel tbh. It’s helpful to anyone with a gti.
Was your car vibrating when taking off?
I had the ECS insert in my 2021 GTI manual for almost 2000 miles now. I think the benefits outweigh the cons and I really like how it drove after installing. The clutch engagement feels more natural without the engine moving a ton, which also helped me shift it better since it was my first manual car. No wheel hop, and vibration is not that bad. Very easy to get used to.
I love it!!
is the insert the same as the dogbone mount ?
I put an insert and aftermarket dogbone mount on my 08 MKV GTI. Brilliant. Brilliant. Brilliant. Nasty vibration reversing up a slope, but otherwise effectively no vibration. No axle hop, no banging on hard acceleration. This and a Whiteline rear sway bar made my MKV perfect for me - no more rear wheel hop going round corners with gusto, just a faint bit more load on the steering making everything feel better.
I got the same but for a mk7. the vibrations in reverse gear is a lot especially on a slope. Just wanted to know if this will mess up the drivetrain in anyway or am I good?
@@hivvirus3717 Your car is good, not sure about your health though.
By BANGING, do you mean when going from 1st to 2nd during launch? That's what happens to me sometimes when I launch it
@@eligoodwin6900 You would possibly get some axle tramp going from 1st to 2nd, mine is DSG so probably it's more likely caused by fairly violent engine rocking with the standard dogbone softish mount. I once experienced a violent bang from the right front when doing a left turn at pretty insane speed and the traction control slammed on the brake.... maybe this can also happen under launch? Anyway, upgrade your dogbone mount and insert. the slight vibration reversing uphill is nothing.
If you guys are up tuning your GTIs, Do your upper motor mounts as well. Oil filled mounts don't stand up to the increased torque for very long. You will get used to it and love it.
Black forest stg1 mounts mk6 gti.
I pulled the subframe on my MK6, pressed in a new doughnut mount and added the dog bone (both from 034). I could only stand the NVH for three days. Took it all apart and put the stock stuff back. An insert is the way to go-less NVH and easy to take out if you don't like it!
Great DIY. That’s a must upgrade for launching GTIs.
It really is!
im getting a gti next week. Im following your build
Just got mine about a month ago and your in for a hell of a time
@@Slinky-cz5oz why do you like it? Is it giving you trouble ?
@@barns5345 no complete opposite actually, you gonna love the thing lmao. Honestly ever since I’ve gotten it I haven’t been able to stop driving, put about 1,500 miles and it’s exactly what I wanted
@@Slinky-cz5oz dang dude. You are making me hyped to get mine lol. I can’t wait to rip this thing. My friend has one and I drove it. It was insane
BRO IM GETTING MINE IN TWO DAYS, IM STOKED
I busted the bolts on my MK6 with K04 turbo. Engine moved forward and kept the fans from spinning so it over heated. Fast and easy upgrade if you're going to tune your engine
Once you do top mounts it does vibrate a lot more but when you know what you got you know what you got. I like your videos good for helping people keep up the good work. I never own a VW. But I may get one 2022
Im somewhat of a newbie to all this. Since I got my Mk7 Autobahn Ive been snoopin around
If your GTI is >4yrs old and doing this (with any Dogbone Mount kit), do yourself a favor and do the subframe locking collars also 👍
“No you need a better job, then you buy a golf r” 😂😂
The struggle is real
You should get a big break kit then go for more power
All your videos offer a lot of insight man. Appreciate it
If you had a 2D mk7 GTI... Would you do a allwheeldrive conversion? People say (Just buy a R)... But the thing is... they don't make a mk7 2D R. I think it'd be badass.... obviously it's expensive to get all the parts. But just buy a salvage R, and take the rear diff, and Haldex system.
I'm glad I found this channel. It is helpful
My uncle had his pendulum snap at the stretch bolt with this kit. Get rid of it and go with something else. It shifted his motor forward, coolant hose into pulley .
Yeah that’s because he most likely only did the insert and pendulum mount. I guarantee you if he got the upper and lower engine mounts alongside them it would still be good.
really enjoying all the videos lately, keep up the good work man 🤟, soon a Z projectcar again ?
Out of curiosity, why are you using the breaker bar after you torque them?
Love the Vdub content dude. Keep it up
Can you do this on ramps with just the front up?
On my Mk7 1.4 Tsi, I have knocking on front right side (passenger side), when I start the engine - the same second I hear knock (tuc), on small bumps, on uneven road only on low speed 0-20km/h, on speed bump i hear the same sound. When I quickly release the clutch several times in reverse or forward I hear the same knocking.
I went in several service who works only suspension, and they said me everyithing with suspension is ok. But knocking is still. Does it engine mount, or something else? Drive me crazy. How do I check this engine mount is it good or bad? Which symptoms your car has it?
I need this really bad after tuning and adding firehawk tires, thanks for the info.
Did you notice a weird click noise when accelerating or letting off the gas after the tune?
@@vwgti8091 No, I guess it depends on what tune you get. I got the unitronics tune to stay safe, I also got my suspension inspected and didn't have to replace the dogbone. But I did have to replace the aux water pump which was probably due to tunning it.
Really nice dude I ended up doing it on my 2015 Golf 7R it shifts way more smoother glad I did it
Man you should really get the OEM Projector headlamps, would make the build look much better 😁
GTI swag level 100 thousand trillion
hahaha lets go.
Am new to Volkswagen..i own a 2020 Golf Gti Se..do you recommend this one
I love the mqb platform just got an a3 the awd was huge to me
Thats a hell of a broken windshield. 😧
Srsly...I got anxiety when I spotted it. :/
Your videos are sooo good quality
Does Polyurethane breakdown overtime?
Why does the car have to be on stands? Why couldnt i just drive up onto ramps? Does the weight have to be off the suspension for this job?
after 25k miles my dogbone mount bushing is destroyed and i get severe rattle and shake in reverese. not sure id do it again.
Are you running res delete and full exhaust on this car, if so what company?
I like what you're doing here and I recognize these streets ... I used to live a stones throw from Mesa High. Is Taquitos Jalisco still there at Gilbert & Broadway? The best tacos al pastor and price to go along with it, their beans are legit too.
Hello, good luck for your channel, from your experience, I can ask you something, I have a golf 7 2.0 tdi and my car, when it is in low rpm, feels a vibration like a tunnel or like a subwoofer, what do you think is something that I can fix? that doesn't make me feel comfortable
Mannn it says availability ETA is Jan 27 2022. How long did you wait?
Hi 👋🏼 I am noticing in my 2017 VW Jetta GLI there’s vibration coming from the engine once the car hits a high MPH of 70+.
What engine motors is compatible to help create a less NVH in cabin and allow the car to drive better as acceleration increases?
You should totally do headlights install taillights install. Even a hood notch fill done right at a body shop or how to get it done at home. There's so much content to be made with this car. Shit even do underglow lmao
Do you need the vehicle lifted up on all 4's for the sake of engine balance during install?
I followed the link in the description and it says doesn't fit mk6 gti?? It's another one I typed in mk6 gti on the site and a different one comes up and looks different??
Amazing video 👍 what is your exhaust setup?
ECS Tuning: Everything is back ordered. ETA pending
Also ECS Tuning: Here you go Cameron Alford. What would you like us to send you today?
They sent this all to me early this year before it was backordered.. I plan way ahead now with all the shipment issues rn
Have you ever thought About adding the mk7.5 lights?
I back this, the bmp tuning projector headlights are well worth the money
@@letswatchification yeah they change the front and back completely
I love the gti content
Do you think it works for golf R?
Great angles
Does anyone have any reference material on how to replace the larger bushing that the mount slides into? Thanks! 9:29
Outstanding.
Do i just need one set of these? Or multiple
What rims are on his car??? Audi???
Any reason you didn’t buy a performance pack GTI?
CAREFULLY WITH THE CORNER BRO ITS NICE CAR I LIKE IT
So is the GTI better than your ST?
Off topic but how much was your mps 3 for and how many miles were on it?
Needs better tyres on there too Michelins
What brand is that torque wrench?
Any regrets getting one with a DSG vs manual?
I've got the ECS mount insert only. Reduced wheel hop a lot! The mount is almost invisible EXCEPT when reversing up an incline or steep driveway. The vibration actually rattles panels (I've got a DSG) but I've learned to live with it. Do you get this as well?
exact same set up and I get the same problem. Im on full stage two tune but the vibration in reverse is making me think about removing it.
Im feeling the vibration, more like clutch kit faulty.
Would this fit 2018 mk7.5
getting a golf r 😎
My GTI vibrates crazy during idling after this mod lol
But definitely improved launching
How does ur gti feel now after a year
@@ricardocardenas4150 still the same. i just got used to it.
@Isaac Sohn now after a year do the benefits outweigh the negatives im planning on dailying mine some ppl say it gets super annoying to the point they wish they never done it
What's the point of torquing the bolts to a spec if he's then turning them another 90° afterwards?
Cause that’s the torque spec for literally so many bolts. For instance 40Nm + 90degrees. The 90 degrees is is stretch the bolt as per it’s designed use and also hence they are one time use bolts
Top show golf GTI mk7 parabéns irmão pelo seu gosto muito top seu golf GTI mk7 meu sonho show 👏👏👏😍
Been thinking of gettin a gti as my first, dk im 100% though
I got mine start of 2020 and rn the price would be about the same. My personal opinion would be to wait because the entire market is overpriced. But if you need a car you need a car. Put 12k miles on it so far and it's a forever car. It's a Mk7, dont like the Mk8s
@@TheGhman87 im gonna be lookin at mk4’s or mk5’s on facebook, already seen some good deals. Just gotta get my money up
what happened to that windshield? 10:45
I saw a the same wheel in slightly more black it looks cool in person. At video i didnt like that much but it looks goood in person
What’s your exhaust setup? Sounds super good!
here it was a 3"dp and stock catback
What tires do you have? When you take off I hear no tire spin whatsoever. My mk7 GLi as soon as I step on it barely it starts squealing like crazy. I have toyo tires.
I got pilot sport 4 a/s and it made a huge difference. It's hard to spin the wheels now
VW calls the "dog bone" " pendulum "
So theres vibration at low rpm , but acceleration is smoother?
On my car is mostly when im taking off?
This is a transmission mount, not engine. In this case, the difference isn't much since the transmission is bolted directly to the engine. But the mount is connected to the transmission, not engine.
When your Dogbone is lose your engine will lift upwards so it effects engine a lot.
Your link for how to Jack up the MK7 says the video is private. I understand the normal jacking points but I struggle to put my Jack stands underneath and I don’t want to mess this up. Is there anyway to upload the vid again. Thanks
ruclips.net/video/f0qs98Szt_8/видео.html
Thank you very much, I recently purchased lowering springs and engine mounts and want to save a buck but don’t want to break my car. Love all your builds and vids. Love from Aus 🇦🇺
cost me like $3.70 on 91, here in Central WI
Filling my Cupra (EU fwd golf R) with 99 costs me the equivalent of $96 lol. Americans have it easy with fuel prices
i need a downpipe 😭
Get a map dp, I love mine
Do a Honda build
I haven’t watched in a long time bro is the speed gone ?
Anyone with a 7.5 notice no wheel hop at all as compared to the 7? Not even when launching or just smashing the throttle?
I got a 7.5 gti on pretoria wiith indy’s and i dumped the clutch wheel hop so much it cracked my pretoria 😂
@@jonathanmota6028 is it manual?
Your lucky u live in Arizona out here in California its 4.55 for premium one of my buddy's sent me a picture of when he was up in big sur $7.39 for premium crazy
3.75 premium in Phoenix! People voted for expensive gas in Ca. Clean air tax.. You get what you get. Sux tho, I agree! When I go home to SD I have to deal with it. My 8p A3 sportback gets about 27-30miles to the gallon. Thank goodness.
My man has Splinter Cell sound effects
cool vid
Those bolts £$£$£$£$
Do you still have your Mazda
Negative. Just a mazda mini truck
@@CameronAlford I have the same one and I love the truck
Ahh the days gas was cheap 3.63 now's over 5
Audi a3 is basically a AWD gti
I can only imagine your gas prices rn lolz. $4.75+ here in NJ
Yo! Get that GasBuddy
All you need is a IS38🙃
omg was that a dog 8:21
That exhaust really sounds shit on that tune. Must be a pain in the arse while driving, and it sure brands the driver a wanker. You said it right "you don't want to be that guy" :)
How to destroy your other motor and trans mounts...
Clika shit!
I’d never install this again, shook the shit out of my car removed ASAP
missin out, didn’t even break it in
@@CameronAlford it was 2-3 years ago when I had the car, def missing it watching your vids..I tried finding you on streets of
Gilbert buddy of my lives in Mesa
Its good or bad?
Second
Yo 1st
Hurry up and sell this pile and get to the real car stuff we know you can put out
Huh?
Huh?
Huh?
Huh?
Huh?