Citroen C3 Picasso 1.4VTR+ 2009 - Changing The Drop Links / Stabiliser / Anti Roll Bars

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024

Комментарии • 11

  • @paulrowe8131
    @paulrowe8131 9 дней назад

    Nice simple, informative, video mate. Thanks a lot. Whenever anyone posts something to help others , it seems you get the inevitable "experts" telling you what you did wrong. 😊

  • @jameshaywood878
    @jameshaywood878 Год назад +1

    You should loosen and tighten the wheel bolts while the wheel is on the ground, then the car is less likely to fall off the jack

  • @perrylindsay6682
    @perrylindsay6682 Год назад +1

    i always slightly loosen the nuts on the wheel before you raise the car ,its much safer and easier 👍

  • @VideoPortogruaro
    @VideoPortogruaro Год назад

    Thank you for this tutorial. It has been usefull .

  • @DigitalImagesOfWirral
    @DigitalImagesOfWirral 4 года назад +1

    Thanks for this video, looks so much easier than I thought it would be and works out cheaper than the £70 I was quoted per side!
    Did it fix the knocking problem?

    • @citc3pic259
      @citc3pic259  4 года назад +2

      Yeah, they cost me about £8 each and it's not a difficult thing to do (although, I make it look difficult) - The NS that I changed in the video didn't fix the knocking... but the OS did! Plus the exhaust was making a knocking sound too (see my exhaust vid).

    • @DigitalImagesOfWirral
      @DigitalImagesOfWirral 4 года назад

      @@citc3pic259 I paid £26 for left and right side, went for the slightly more expensive.
      Was the knocking coming from the left? That seems odd that it stopped after replacing the right side!
      Will find out tomorrow anyway if it works.

  • @robertlocke793
    @robertlocke793 3 года назад +3

    jack the wishbone up a little and the drop links will fall out lol

    • @davidedwards808
      @davidedwards808 3 года назад +2

      Yep, because it's jacked up one side the anti-roll bar is under tension! Lol

  • @anthonygreen9157
    @anthonygreen9157 Год назад +3

    You lowered and raised the car on the manufacturers "side of the road" jack.
    Next time, read the instructions on the jack.
    NEVER NEVER use that jack to work on a vehicle.
    My arms, fingers and feet are too important for your methods, thank you

    • @paulrowe-z1z
      @paulrowe-z1z 26 дней назад

      Nothing wrong with using the roadside jack with an axle stand or similar. Not everyone can afford a big trolley jack. The guy has made the video to help other people. Cut him some slack.