"Cyber Drift Punk" Widebody Mazda MX-5 Miata Scale Model Build - 1/24 Tamiya
HTML-код
- Опубликовано: 21 сен 2024
- 1/24 Mazda MX-5 Miata Eunos Roadster Model Car - amzn.to/3RK0sUp
Hi guys, in this video I will be building a Cyber Drift Punk Widebody Mazda MX-5 Miata in 1/24 scale. Enjoy!
Wanna show some support for the channel? Grab a set of mini RB26DETT engines on my web store at junsminigarage.... They are currently on sale!
My other videos-
1/24 model car full builds - • 1/24 Scale Model Car F...
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutters: amzn.to/3z643lt
Tamiya Hobby Knife: amzn.to/3aJRTmx
Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Surgical Scalpels: amzn.to/3dSlMTu
Duck Poster Putty: amzn.to/2Yix37r
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Mini Hand Saw: amzn.to/3mXY1Mt
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
All music tracks used in this video are licensed from Audiio.com
"City Life" - Alex Velte
"So Far" - Rhodan
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
#mazda #miata #mx5 #scalemodel
![[ASMR] Building Takumi Fujiwara's "Project D" AE86 | INITIAL D 1/24 Pre-Painted Model Kit | Aoshima](http://i.ytimg.com/vi/g3xrBVALKrw/mqdefault.jpg)
![[ASMR] Building Takumi Fujiwara's "Project D" AE86 | INITIAL D 1/24 Pre-Painted Model Kit | Aoshima](/img/tr.png)
this is maybe the fate of combustion engine in the future. getting chase by the cops. driven hard . another good job with the theme there. i feel it !!!
Yesss in about 200yrs
They’ll have to pry my car from my cold, dead hands
Maybe not, but I'd imagine that hacking equipment would be reason enough for the cops to want it
@@muazunais2378this future is way closer than that, with most countries banning ice engines being produced by 2035 with a agenda to there for gradually fade them out it’s coming. And fast.
The story you created as you were building this car helped make it more real. A “not-so-distant” future of EVs and computer controlled everything.
I bought a Stagea model kit about a year ago and have yet to touch it cause I wasn't sure where to start. Recently found your channel, and now I've never had more ideas on what to do with that model. This build looks awesome and I can't wait for the next one!
You never fail to deliver. Not only are you very talented in modeling the creativity and ideas were great. The photography at the end was amazing as well.
I just done a spec race with this Mazda on forza motorsport and somehow this video was recommended to me
I enjoyed it
Both the race and this video 👍
the interor is certanily the highlight of this model, great work!
also only now watching the end in more detail, the sad highlights and the music really make the car more humanlike, almost as if its tired and sad because it has to always be on the run.
Jun, you’re an alright guy. Love your sense of humor ! Please keep the videos coming
Fantastic work, loved watching you add all those details.. both to the exterior and interior. Well done 👍🏼👍🏼
Thank you for your support Karl.🙏
Now this is one seriously aggressive looking Miata! Love how you've modified what looks like a fairly basic kit with this build.
It's awesome built! Uncle nightshift use Tamiya Grey putty diluted with mr. Cement not with lacker thinner.
Thank you for your work!!!!
Tofu Auto Works has an IRL wide body Miata. Am amazed at your skills. I’d love to see you build the HASEGAWA Cq-1 Cosmo Sport Mat-Vehicle 1/24 Scale Kit. Thanks for the video!
We love your videos and it's very well❤❤❤
Thank you; I appreciate it.❤️
One of my favorites I have 4 or 5 in my stash so many possibilities along with the Nissan s13 edit I can see this sitting in a blade runner diorama
After 3D printing, making additional wide bodies became easier and the results were quite good😊🥰
This is awesome! I'm gonna have to take notes.
Thank you!! Your real life cyber punk Miata build is the craziest thing I have ever seen!! Amazing!!!❤️❤️
Wow, you make stock Miata with modification and that's so exciting
This is really good! I love the style and the backstory! Im going to have to make one myslef now😅
Looks way better than most irl builds…
WELCOME BACK JUN, you've been gone for a little bit sir. Great build as always!!!!!!!!
Thank you 🙏
The pictures in the mini garage are some of your best! Excellent work, Jun! You should get into the hairspray method for chipping.
Cool project! Perhaps in the future gas cars would have paint that makes it invisible to radar and other forms of detection.
Amazing video!
Love your content 🙏🏼
Health and happiness to your family
Thank you so much!
This interior is next level 🤯
I really like your channel because you build some awesome rides and because you tell us what your doing. Not crazy about watching somebody building with no narrative. Keep up the good work brother !
Thank you. I appreciate it.🙏
Dude this is so sick! Blown away.
Патрубки радиатора через фару сомнительное решение конечно, но тем не менее, модель шикарная! Исполнение огонь! Респект!
Whooohooo a new car build by jun!❤
I think they will avoid getting crushed with all those cool gadgets! You have a great imagination!
It's been awhile, I missed you so long Jun, so great build, this Roadster has turned out.
Blown away. You have inspired me to give this a try.
Very Cool Build!!!!! Nicely Done!!!! Thanks for sharing
This is super sick! Love the creativity. Thanks for sharing your hard work as always.
Thank you 🙏
you know you're a master builder when even the invisible details are needed for your complete satisfaction. the build was amazing. only thing I felt was missing was a couple of dents in the weathering of the car which I guess might have been too much of a hassle to get around
I loved your work, and I am looking forward to seeing more.
Amazing art,sir..I have been really inspired by you.😊
i love the tech inside the vehicle, and the weathering on the body! Great project buddy!
This is awesome! It would be cool if you did a drift missile Volvo 240 wagon. Just an idea though, no pressure.
Absolutely amazing build and video!! Seriously awesome, Love the little pieces of story you gave and showed through the tiny details!! Maybe you should start a small series of such retro futuristic builds with their story!
Wow, that looks truly amazing!!
Great idea for this build. I really like it
I love your videos. Would be awesome to see you build the '88 911 Turbo from tamiya
Blackbox has some awesome sculpts. I used several of his pieces on the r32 gtr I finished recently
Bravo!! As always another great video! 👏🏽👏🏽👏🏽
Thank you.🙏
Absolutely amazing
This is so creative you’re so talented
I love it and the story you put behind it was excellent
I would call that story night runners But I don't know what do you think? I just love it
Cyber Drift Punk 2055: The Night Runners.😏😏
Great looking model! Amazing, ticks all the boxes for modern day trend :)
Thank you 🙏
always nice to see a jun upload
edit: what a great build
I LOVE THIS STYLE SM! You are so good at making models. You should recreate the Porsche 911 from cyberpunk 2077 as it has the same futuristic style.
Not my cup of the...but this project it's stunning!!! Nice job mate!!!✌️✌️
Incredible build, so much going on in that interior!! I really like it. Thanks for sharing this video. 👍🇦🇺
What a talent I just wish I could be as good 😢 awesome job sir 👏 🙏
Very very details bro, good job
you should make a cyber drift punk mini coop.
Can you do one of the aoshima grachan series cars in the following videos?
This kicks so much ass choom, absolutely love the cyberpunk look on this model. Awesome job!
So cool, amazing work.
Wow that's wonderful
I love it! The amount of detail a resin 3d printer can make is insane! Anyway, where is the car gonna get fuel if gas cars are banned?
this is insane i love it
Love these style of builds. Mad Max and cyberpunk are 2 of my most favorite genres for car modifications
Welcome back, glad to see a new video as I've pretty much watched all your other vids =)
Thank you for the support.❤️
Great project. Well executed 👏👍👍
Jun awesome video bro. You inspire me to improve my builds
Great video as usual i would love to see what you could do to a racing truck
You’re talented I bought a gtr 34 model kit but I’m afraid to assemble it lol
Awesome video, your channel is a big inspiration for me to start recording and edition longer videos about my builds :) Keep it up!
Thank you so much.❤️❤️
I really enjoy your voice over videos and your humor! Keep up the great work!! This build is awesome.
Thank you. I am glad you enjoyed it.❤️
Missed ya man ❤
Love your videos so much
Awesome job!
hey Jun been following your builds along time now on youtube great to see you do new fresh builds again miata turned out awsome iv couple versions of the miata from the old to the latest RF, awsome work blackbox is a awsome dude he supported build iv to finish by sending me the file for the 400Z iv to still finish that build in very near future he has awsome rims bodykits iv baught alot stuff off his site and other guys👍🎄
Not fan of the Mazda Miata but do like ur scale model build's Jun & kustom Tamiya 1/25 scale model of Miata is ready for JDM scene.
DDAAMMNN !!!! This is NICE NICE NICE !!!!!
The first thing is to congratulate you on the work, I really liked it and then thank you for using my seat design, I was happy to see it.
I love the seats!! Great looking design!Thank you very much.❤️
Excellent video
Hey, try to build some of RC Drift RWD 1/24 using 1/24 model kit body, it would be nice project for you❤👌🤝
Very well done 👍
Great job mate, cheers Graham
Looks great
I have a suggestion for you and next time you should make the hood, trunk and doors open by the way nice work 👍👍👍
I'm not into model cars, but your build of that is really excellent. Thank you for sharing it.
Thank you.🙏🙏
I think the bottom texturing looks great dude especially after the paint.
Good job😊 0:56
You are amazing👍👍
I love it!!
We need more please!
Love the imagination here. Shows what can be done with a little thought and some resources. What a very cool build. Thanks for sharing.
Thank you Spencer.🙏
Wow so cool!
Amazing work again!
These videos are amazing, the voiceovers are great for an engaging video, though sometimes I throw one of the old videos with just music on my second screen and just chill.
Thank you.🙏
Outstanding!
Amazing work !!
Anyone else hear “This little bastard” at the beginning? 😂
I said that didn’t I?🤣🤣
I love this. The detail is great. I'm curious what kind of 3D printer you use for the parts. I want to get into that next. Thanks for all your videos, they have been an inspiration!
Love your vids. I'm jealous of your brush painting stability.. I just tried brush painting the window trim on my latest model and whew.. I made a mess. Luckily, it was just on a model that had a ruined paint job, so it didn't really matter but I learned not to do that, again..
Good job 👏
Idk why you said the texture on the bottom of the chassis was subpar, I thought it looked great!
Wow what a build loved it and would love to do my own version , do u sell the body parts as don't have a 3d printer thanks Marc
great