Received before due date which was great. Assembly of product was easy with simple to follow instructions. Started on 2nd pull and has continued to do so each time. I use this strimmer almost everyday on both light and more heavy / thicker grass and bushes, have not had a problem so far. Unlike more expensive manufactured strimmers I have previously owned. Great value for money and would definitely recommend.
I bought one last year. It stopped running. It was getting spark but no fuel. I ruined the carb messing with it this spring. A new carb was $8 delivered and it now runs perfect. It starts warm with barely a pull on the rope and idles well. I use the pole saw attachment quite a bit. It's a bargain. The reach with the extension is helpful. I think you'll like it.
Nice machine. They set it rich for the breaking in/running in period of the new engine. I break in/run in a new 2 stroke engine for a full year before I run at full power. I have had and used my trimmer for seventeen years and still runs like new.
Fwiw- After wearing 2 out in 4yrs I dumped my Shindaiwa's speed feed for a Husqvarna T35 head. A T35 thats been on my Husq 20yrs & it still works like new. Tough heads easy to load! With almost 3 acres here & a large thicket/woods out back Im considering one of these suckers myself for the hedge trimmer. Good vid, thanks!
im replacing a Stihl weedeater with this model, and i must say THIS is the best value in weedeaters. it is built SO well, and in some ways far better than my old stihl. great video btw man! you did a wonderful job showing all the details, and i REALLY love how you answered my question about the speedfeed 450! the 450 would not fit on the stihl without heavy modification, so i am SUPER happy i can now use the 450 head!! i absolutely love this tool and cannot recommend it enough.
@@cmizer9 I had an Fs45! this orange one totally smokes it 10 ways to sunday. while the 45 was definitely a beast, this is even more powerful, which as many say, comes at the price of being heavy. BUT i prefer the extra weight for both the sturdy build quality and even the upper body exercise haha- its a big heavy engine, but thats what you get when you want a quality motor (plus the fuel tank is huge). i have used this new trimmer a LOT so far this season, and its been easy to start and the straight shaft is SO much better than the curved on on the stihl. furthermore, the size and weight work better since im 6'2" and dont need to bend over slightly like the old stihl- much better posture. and best of all, as this guy shows in the vid, since its a straight shaft w gearbox, you can just EASILY add the speedfeed 450 head to it! the fs45 was totally incompatible with the speedfeed or any other variant- so you had to use a proprietary stihl head no matter what. i cannot recommend this orange trimmer enough!
A little googling and I came across the Liam Sherwood 5 in 1 same exact thing as this. It does come with an Oregon chain and branded Liam. They sell that brand on Amazon UK and not available for shipping here to the U.S. I'd be willing to bet this the company that makes it for them but sells it cheaper unbranded which is the case for a lot of stuff we buy. It's amazing how many things we buy that are branded that we think are better quality because it's branded or "made to US standards" It's still made in China! Great video sir!
4 years later LOL I just bought one of these, the up dated modle, some of the things you pointed out have been fixed, like the string cutter head is now the one you put on yours, he cheap one is gone.
The one you got is much heaver than the one I bought, I have the same brand and got mine from Home Depot. You got a good deal. I wish I had saw your video first. Mine does not have any grease fittings. Mine has a Number on the back MFT 26. You got a deal. It did start right up. The engine is very heavy.
The rubber things are gaiters to go over your shins and ankles and boot tops. No zerk on the trimmer head so you don't blow out the seals. You use a squeeze bottle to add low viscosity grease.
I bought this tool. Adj carb in like 5 seconds after it started on 3rd pull. This machine is a freakin beast. The string line is strong and spins so fast the grass looks like a tornado flying around. I hope it last awhile. It sounds mean as hell just idling. Ebay for $178. $209 with shipping. Only thing wrong is cutoff switch didn't work. I just pull sparkplug boot off to kill it.
Sounds like a shocking experience pulling the plug boot off. I have an old trimmer with the same problem and I just put the choke on and it putters off. Just thought I would share that so you don't have a powerful shock from it sometime. It hurts I know from experience. Not fun.
@@shawndubay4050 i fixed it. The ground wire had come loose at the plug. It works now. This tool is badass. It vibrates, but at the speed it spins that'll happen. Lol
@@speterbilt very good. I have a stihl FS-250R like that. I just choke it after I'm done and it seems like it primes it for the next time I start it. At the minimum it helps keep piston rings and the crankshaft ball bearings well lubed with the 40.1 fuel mix.
@@shawndubay4050 nice. Thanks for the vid. I love this weedeater. Even if it last 2 yrs for the money well worth it. It starts on the 3rd pull even after sitting around
Thank you for the video, I'll look now to see if there's a review after using it more. The engines aren't that bad usually, just take more maintenance than you'd like. Also the choke is upside down. On and off are incorrectly labeled on these machines pretty often.
The engines on these are sound, it's more the attachments I've had trouble with. To start off the gears in the polesaw's gearbox stripped after the blade snagged a knot in a branch. That says something about the quality of those gears given it's only a 25cc engine. Then the clamp bolt for the attachment quick release snapped, even though I was only tightening it with a screwdriver. I had to remove that quick release mechanism because the clutch basket seized after sitting for 2 months. Good engine, shit everything else.
The engine on mine was advertised as 52 cc. I haven't had anything break on it other than fuel lines and the handle to change the attachment out. I've been pretty happy with mine. The string trimmer is what I used the most. It starts on the second pull cold, religiously. 1 quick pull warm and it fires right up.
I bought this trimmer...assembled and used first day... It worked fine until the engine made a noise and quit... after completely taking front apart I found a cracked flywheel. Bought a new one on net and put back together ...It ran fine until the bracket for condenser module cracked and now I need to replace but cant find.. wish it would run for longer ... I feel there were cracks in the shroud casing which went thru inspection.. out of warranty so my loss,..did not get a chance to use chain saw or other functions so trying to fix.. beware on this purchase...
Í bought 1 few months ago but sent it back. Throttle cable was to short not enough slack. Took apart throttle unit but no chance. You won't find that on Stihl and yeah it's a gamble with non brand.
I find this a good machine. The strimmer part is good, the chainsaw bit is good, but the hedge part is way to heavy. Been using it for 2years now nps. Would buy another 1 in a heart beat, as u can buy the strimmer, chsinsaw an hedge bit separate, same with the engine part
i got one of theses cheapies a coocher 42cc $155 walmart cant beat the price had trouble starting it but maybe my fault with bad gas/it was a brushcutter and trimmer all and all for homeowner it a 8 out of 10 reccomend it
I have one just like it,how do I slow the gas down, It's like I been pulling the trigger on it but I'm not, I need help and also where can I buy only anothe extension pole for it
I bough the same one under the brand name of "Denzel"! Its realy is a very well engineered trimmer/cutter. But potential buyers be warned!!! This thing is heavy as hell! With fuel and everything is probably over 10kg! That's Stihl 880 teritory just for comparison!! My hands are still thingling(and its midnight now),after a few hours of sawing around my garden today! You have been warned! For occasional cut or trim the hedge it will be ok probably. But if you look for more than hour or two work... than this wouldnt cut it!(pun intended) 😁 Just shell the money for an Echo...
Just found your vid that strimmer was that good it nearly took it's self to do the job when you put it down was looking for one but must of stopped selling as link was a year ago as not working Shame looks good
Cool deal boss! Hey, I like the driveshafts slidin out...ifn you take em out, clean and grease em every once in a while...well the driveline will last maybe even from now on. Great deal and great video....heck, ya sold me on one...lol! Many Blessings, Kev
Got mine a couple of days ago...e-bay deal...$177.00...same exact unit...package was missing the chain saw blade safety cover and the "spike" type handle...wrote to their customer service yesterday...waiting to hear back from them...won't be the end of the world if I don't. However, a major glitch is the pull starter mechanism...on the 3rd start, the pull starter jammed in the extended position...chord won't retract...took the mechanism off the machine and tried to loosen the Phillips screw that holds it onto the housing...figured that would possibly loosen up the tension on the recoil spring...the screw won't budge...don't want to force the screw...anyone had the same issue?
I Just bought a 42.7 cc brush cutter under the coocheer name. Had a tough time getting it started out of the box but learned about the reverse choke from your video. I am wondering if you have been running 25-1 or 40-1 oil mix? I am using my standard 40-1 and it seems to run fine on this. Thanks for the excellent reviews.
Coocheer brush 42&58cc cutter carburator cannot be high speed adjusted. For that matter it can't be low speed adjusted either. Only idle speed is adjustable.😱😡
Be careful so dude hits the primer bulb like six times probably could have hit it more since there was no fuel in the lines but what does the primer bulb do it pulls gas from the tank and pushes it into the cylinder for easy start up. Now on machines that don't have a primer bulb you would pull it over a couple times slow but with the primer bulb that's not necessary that's what the primer bulb does some people
Hello, I have the same brush cutter in the video. The manual says a 25:1 ratio. Runs good but the smoke is white coming out of the exhaust. 1.) are you saying that these cheap weed wackers usually have high oil ratios? 2.) is it true that the fuel ratios are just meant for emissions? Thanks!
@@Lanninglongarmmowing ok because I ordered mine last Thursday and it said it’s gonna be here Friday and it’s just now shipping but I’m from Mississippi
Do not waste your time on a product like this it’s a price of shit and the part where the engine connects to the shaft of the tool is easily broken and will get stuck or jammed. You might as well spend the $400 on a good product that will last more than one year
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
I have a similar, says MT52. Does well, but take a look at carburetor from time to time, mine went loose after a few tanks of fuel. Check the bolts and tighten them if necessary. Also, as the winter passed, I had to change fuel tubes, original ones were like a plastic.
The carb coming loose is funny! Definitely you will need new gas lines for this machine after 1 year. You'd be lucky if the carb lasted longer than that haha.
Thank you for this very useful and extensive review. I've just received mine today (T-Mech 5 in 1 Multi-Tool ref.10611) and when I had a look at the choke switch I noticed that they have added a little sticker with "Cold start - Choke on" (TOP position) and "Run - Choke off" (BOTTOM position) which contradicts the instructions on the original moulded plastic cover "OFF" (TOP) and "ON" (BOTTOM). Also, when it comes to the oil-fuel mix, the ratio is clearly 1 to 40 (in the instruction manual and at the back of the engine itself). Can't wait to get this going!
Those gray material cuffs or gaiters are to be worn around your ankles, to keep the weed and grass cuttings, maybe small stones, from going in your boot tops.
Can you take a look inside the auto feed strimmer head and let us know how to reload the nylon. The one I have has no holes in the spool to hold the line as you wrap the new stuff on. Cheers.
I have had one of these for about 3 years and a post hole borer with the same engine. The choke is labelled backwards, i start mine with the choke in the "off" position and run it in the "on" position.
Am jealous. Is lawn mowing season for you already. Can't wait to see how it holds up under heavy use. Maybe you struck gold twice and it's as durable as the 45cc Chinese chainsaw.
FYI I suspect you may have a third carb adjustment. There's probably a third screw in the center of the rotatory portion looking down at the top of the carb (inside the brass part). This is for idle mixture. Turn it until you get the highest idle speed, then 1/4-1/2 turns out, then set your idle speed with the other screw.
I may have missed where you said it, but the manual for these says 25 to 1 mix. This is the first chinese machine I''ve gotten, but I'm running what they ask for. Mine didn't need adjustment, but it could just be by chance. Ditto on the gas tank - never seen a tank that big on a trimmer.
Can you take a look inside the auto feed strimmer head and let us know how to reload the nylon. The one I have has no holes in the spool to hold the line as you wrap the new stuff on. Cheers.
On the high-dollar Stihl or husky,you have THREE carb adj.screws... 1.)Low idle 2.)high speed 3.)idle set In 27 years,I'd like to see if your new weed trimmer is still running like new like my Stihls are.
I agree the old Stihl trimmer, made from components manufactured in Germany, can last a very long time given proper maintenance. However, Stihl now acknowledges that the great majority of components used in the current generation of Stihl products, including trimmers, are acquired from "global sources". That usually means China/Asia.
I'm going to say for the price you didn't get too bad of a deal if you need any replacement parts you're going to have to see it Echo cuz that looks like an echo rip off then again most weed eaters have similar parts
Wrong, it's not even close to being an Echo/Shindaiwa trimmer, which by the way are one and the same. It's somewhat based on an old Mitsubishi engine design, but over the years it has been improved to where now, it shows much design and reliability improvement.
My 31 cc hurts my arms. It's heavy. Switched to a 128 ld but will not discard the 31 cc because it's just to big a machine. Unless I can investigate this one.
Use a quality carrying harness, and don't be cheap about getting one. The Echo Brushcutter Harness is the best I've used. But in any case, improperly carrying ANY weight for a long time period can permanently cause back/arm/spinal injury.
Configured as a string trimmer, mine weighs 15.8 pounds with full fuel. In my opinion, use of a carrying strap is necessary, not optional. Also, the 131R is 14.1 pounds, not that much less, but it makes a whole lot less than 2.7 hp.
Ok, i have to know, what brand it is and where you bought it. I have a 31 cc Craftsman that was my heavy hitter with the attachments. But is it compatible with click link/ expand it attachments. It sounds just like my Craftsman. Which still runs. But blew a head gasket after 15 years. What brand is it. As a semi pro gardener I am licking my chops to check this thing out for myself.
Your Craftsman 31cc trimmer, either 2-cycle or 4-cycle, is actually a TroyBuilt, and uses the old TroyBuilt accessory attachment couplers. That makes the attachments not compatible with this machine. For a gardener, this is a powerful heavy-duty brush cutter, and because it's so heavy it's not well-suited for light-duty tasks, such as walkway edging, small trimming jobs, cutting growth less than 12" tall, etc. But if you want to cut a road through heavy brush to where you need to trim, cut down small trees, trim 10 foot tall hedges, this is the machine to use. These machines don't really have a brand. But the China makers will brand it anything you want, as long as you buy it.
@@philliplawerence5784 whatever, I'm using all those attachments I used on the 31 cc on the brand new Husqvarna 128 ld . Click link or expand it they all fit both machines. I don't remember what I was referring to but my 16 year old click links all fit so does my brand new hedge trimmer attachment. Fits both machines.
The difference you will see is over time. The gas tubes on this machine will not last a full year. Desintegrating plastic then goes into the carb and rest of the system and you're lucky if that's all you have to fix.
I was disappointed, could not add comment on your 55 year old ash tree felling episode. You were right on could have used longer bar saw, and wedge cut out was little big. Ashes usually don't need wedging. But you had tricky fall, and direction achieved. Actually more interested in seeing video showing off the one or two best Ash trees you protected from EAB on your wild forested property. You got anymore with main trunk still alive? Just consider $20 worth of drench mix applied this weekend similar to fertilizing tree. To help bring back functionally extinct species using protected scattered wild seed masting trees in the woods. Once fatal danger from "infestation level" populations inevitably passes locally after 10-12 years, treatment no longer required to keep tree alive. Obviously option of treating your trees not to save money, as you fell and chunk out your own. But as a smart ash arborist proving to all those so called tree huggers and ecology conservationists, how so cheap & easy it was to reclaim life of iconic American Hardwood from killer Chinese bug hitching ride on crate of poorly manufactured goods.
That's a hell of a steal. I just got a 27cc craftsman for the same price. no attachments other than the string trimmer. I'm assuming this isn't compatible with any of the Ryobi Craftsman or troy built attachments?
@@leedslandscaping2991 But the Ryobi sweeper attachment works ONLY with the Ryobi (Home Depot) products. It cannot be adapted for use with this type of machine without considerable and serious re-design. Plus, the Ryobi is a light-medium duty tool, not a very heavy duty tool as is this model. If it COULD be somehow adapted, the much increased torque of this machines engine would probably damage/destroy the Ryobi sweeper.
@@philliplawerence5784 I use mine with a Husqvarna Powerhead, plenty of power, I would not recommend electric but any consumer gas powered multi-tool should work!
You can wash it with some water and soap, it looks like a sponge ring. Mine is quite clean after 6 years of use. U can make one yourself or buy it from china if needed
Thanks for your video. Just received my unit. Could you tell me where you got you replacement heads for the line trimmer a link if is Amazon a lot of units show up if I search speed feed 450 on amazon.
You are welcome. You will like it it's unbelievable how much raw power it has. As long as it says speed feed 450 you should be good to go. If I remember correctly they came from eBay.
I wish more people made videos for the cheap ebay stuff like this. It's always such a gamble and this video reassured me. Thanks!
You are welcome. This machine has gone up a lot since this video. Still running good to this day though.
Received before due date which was great. Assembly of product was easy with simple to follow instructions. Started on 2nd pull and has continued to do so each time. I use this strimmer almost everyday on both light and more heavy / thicker grass and bushes, have not had a problem so far. Unlike more expensive manufactured strimmers I have previously owned. Great value for money and would definitely recommend.
I bought one last year. It stopped running. It was getting spark but no fuel. I ruined the carb messing with it this spring. A new carb was $8 delivered and it now runs perfect. It starts warm with barely a pull on the rope and idles well. I use the pole saw attachment quite a bit. It's a bargain. The reach with the extension is helpful. I think you'll like it.
I want your products can i buy that ?
Nice machine. They set it rich for the breaking in/running in period of the new engine. I break in/run in a new 2 stroke engine for a full year before I run at full power. I have had and used my trimmer for seventeen years and still runs like new.
Fwiw- After wearing 2 out in 4yrs I dumped my Shindaiwa's speed feed for a Husqvarna T35 head.
A T35 thats been on my Husq 20yrs & it still works like new. Tough heads easy to load!
With almost 3 acres here & a large thicket/woods out back Im considering one of these suckers myself for the hedge trimmer. Good vid, thanks!
im replacing a Stihl weedeater with this model, and i must say THIS is the best value in weedeaters. it is built SO well, and in some ways far better than my old stihl. great video btw man! you did a wonderful job showing all the details, and i REALLY love how you answered my question about the speedfeed 450! the 450 would not fit on the stihl without heavy modification, so i am SUPER happy i can now use the 450 head!! i absolutely love this tool and cannot recommend it enough.
What model Stihl did you have? How does it feel with regards to power compared to your Stihl (i.e. bogging down in heavy grass, etc.) Thanks!
@@cmizer9 I had an Fs45! this orange one totally smokes it 10 ways to sunday. while the 45 was definitely a beast, this is even more powerful, which as many say, comes at the price of being heavy. BUT i prefer the extra weight for both the sturdy build quality and even the upper body exercise haha- its a big heavy engine, but thats what you get when you want a quality motor (plus the fuel tank is huge). i have used this new trimmer a LOT so far this season, and its been easy to start and the straight shaft is SO much better than the curved on on the stihl. furthermore, the size and weight work better since im 6'2" and dont need to bend over slightly like the old stihl- much better posture. and best of all, as this guy shows in the vid, since its a straight shaft w gearbox, you can just EASILY add the speedfeed 450 head to it! the fs45 was totally incompatible with the speedfeed or any other variant- so you had to use a proprietary stihl head no matter what. i cannot recommend this orange trimmer enough!
Thanks for the vedio.. !! Always look at reviews before buying.. 👍👍
A little googling and I came across the Liam Sherwood 5 in 1 same exact thing as this. It does come with an Oregon chain and branded Liam. They sell that brand on Amazon UK and not available for shipping here to the U.S. I'd be willing to bet this the company that makes it for them but sells it cheaper unbranded which is the case for a lot of stuff we buy. It's amazing how many things we buy that are branded that we think are better quality because it's branded or "made to US standards" It's still made in China! Great video sir!
4 years later LOL I just bought one of these, the up dated modle, some of the things you pointed out have been fixed, like the string cutter head is now the one you put on yours, he cheap one is gone.
The one you got is much heaver than the one I bought, I have the same brand and got mine from Home Depot. You got a good deal. I wish I had saw your video first. Mine does not have any grease fittings. Mine has a Number on the back MFT 26. You got a deal. It did start right up. The engine is very heavy.
There's 3 adjustments one on the top in the middle of brass cable swivel.
The rubber things are gaiters to go over your shins and ankles and boot tops. No zerk on the trimmer head so you don't blow out the seals. You use a squeeze bottle to add low viscosity grease.
I bought this tool. Adj carb in like 5 seconds after it started on 3rd pull. This machine is a freakin beast. The string line is strong and spins so fast the grass looks like a tornado flying around. I hope it last awhile. It sounds mean as hell just idling. Ebay for $178. $209 with shipping. Only thing wrong is cutoff switch didn't work. I just pull sparkplug boot off to kill it.
Sounds like a shocking experience pulling the plug boot off. I have an old trimmer with the same problem and I just put the choke on and it putters off. Just thought I would share that so you don't have a powerful shock from it sometime. It hurts I know from experience. Not fun.
@@shawndubay4050 i fixed it. The ground wire had come loose at the plug. It works now. This tool is badass. It vibrates, but at the speed it spins that'll happen. Lol
@@speterbilt very good. I have a stihl FS-250R like that. I just choke it after I'm done and it seems like it primes it for the next time I start it. At the minimum it helps keep piston rings and the crankshaft ball bearings well lubed with the 40.1 fuel mix.
@@shawndubay4050 nice. Thanks for the vid. I love this weedeater. Even if it last 2 yrs for the money well worth it. It starts on the 3rd pull even after sitting around
@@speterbilt take good care of it and don't run it too hot and it will last for years.
Thank you for the video, I'll look now to see if there's a review after using it more.
The engines aren't that bad usually, just take more maintenance than you'd like. Also the choke is upside down. On and off are incorrectly labeled on these machines pretty often.
The engines on these are sound, it's more the attachments I've had trouble with.
To start off the gears in the polesaw's gearbox stripped after the blade snagged a knot in a branch. That says something about the quality of those gears given it's only a 25cc engine.
Then the clamp bolt for the attachment quick release snapped, even though I was only tightening it with a screwdriver.
I had to remove that quick release mechanism because the clutch basket seized after sitting for 2 months.
Good engine, shit everything else.
The engine on mine was advertised as 52 cc. I haven't had anything break on it other than fuel lines and the handle to change the attachment out. I've been pretty happy with mine. The string trimmer is what I used the most. It starts on the second pull cold, religiously. 1 quick pull warm and it fires right up.
I bought this trimmer...assembled and used first day... It worked fine until the engine made a noise and quit... after completely taking front apart I found a cracked flywheel. Bought a new one on net and put back together ...It ran fine until the bracket for condenser module cracked and now I need to replace but cant find.. wish it would run for longer ... I feel there were cracks in the shroud casing which went thru inspection.. out of warranty so my loss,..did not get a chance to use chain saw or other functions so trying to fix.. beware on this purchase...
Í bought 1 few months ago but sent it back. Throttle cable was to short not enough slack. Took apart throttle unit but no chance. You won't find that on Stihl and yeah it's a gamble with non brand.
Got one for around 100 euros, great bit of kit.
I find this a good machine. The strimmer part is good, the chainsaw bit is good, but the hedge part is way to heavy. Been using it for 2years now nps. Would buy another 1 in a heart beat, as u can buy the strimmer, chsinsaw an hedge bit separate, same with the engine part
Brilliant video very informative thankyou 👍
I bought the exact same unit and -0- assembly instructions can with it.
i got one of theses cheapies a coocher 42cc $155 walmart cant beat the price had trouble starting it but maybe my fault with bad gas/it was a brushcutter and trimmer all and all for homeowner it a 8 out of 10 reccomend it
I have one just like it,how do I slow the gas down, It's like I been pulling the trigger on it but I'm not, I need help and also where can I buy only anothe extension pole for it
I bough the same one under the brand name of "Denzel"!
Its realy is a very well engineered trimmer/cutter.
But potential buyers be warned!!! This thing is heavy as hell! With fuel and everything is probably over 10kg! That's Stihl 880 teritory just for comparison!! My hands are still thingling(and its midnight now),after a few hours of sawing around my garden today!
You have been warned!
For occasional cut or trim the hedge it will be ok probably. But if you look for more than hour or two work... than this wouldnt cut it!(pun intended) 😁
Just shell the money for an Echo...
bettter grease it chine uses little to no grease and it will be junk grease not moly mostly i see vasiline looking clear grease in that stuff
Just found your vid that strimmer was that good it nearly took it's self to do the job when you put it down was looking for one but must of stopped selling as link was a year ago as not working Shame looks good
Cool deal boss! Hey, I like the driveshafts slidin out...ifn you take em out, clean and grease em every once in a while...well the driveline will last maybe even from now on. Great deal and great video....heck, ya sold me on one...lol! Many Blessings, Kev
I turned the idle down abit on mine, they idle to hi from stock for my liking
Whats the make and model..n dies it come with a harness..for shoulder support
I forget the model number but it does come with the shoulder harness.
fuel lines on these are trash, head and shield is fragile, but overall its great product.
Yes if I remember correctly I did have to replace the fuel lines on this machine. After that, it's a reliable beast!
Got mine a couple of days ago...e-bay deal...$177.00...same exact unit...package was missing the chain saw blade safety cover and the "spike" type handle...wrote to their customer service yesterday...waiting to hear back from them...won't be the end of the world if I don't. However, a major glitch is the pull starter mechanism...on the 3rd start, the pull starter jammed in the extended position...chord won't retract...took the mechanism off the machine and tried to loosen the Phillips screw that holds it onto the housing...figured that would possibly loosen up the tension on the recoil spring...the screw won't budge...don't want to force the screw...anyone had the same issue?
I Just bought a 42.7 cc brush cutter under the coocheer name. Had a tough time getting it started out of the box but learned about the reverse choke from your video. I am wondering if you have been running 25-1 or 40-1 oil mix? I am using my standard 40-1 and it seems to run fine on this. Thanks for the excellent reviews.
I can’t remove the cap to add string to it.
Just ordered myself one of these 👍🏼
Where at and what brand
Have the name/model/price/where to buy?
Will the trimmer head (including the shaft) fits on STIHL KM 90 R gas trimmer?
Coocheer brush 42&58cc cutter carburator cannot be high speed adjusted. For that matter it can't be low speed adjusted either. Only idle speed is adjustable.😱😡
Does anyone know where to find a service manual for this type of engine ? I searched the internet but but with no luck. Thanks.
Whats the brand where can you find
Be careful so dude hits the primer bulb like six times probably could have hit it more since there was no fuel in the lines but what does the primer bulb do it pulls gas from the tank and pushes it into the cylinder for easy start up. Now on machines that don't have a primer bulb you would pull it over a couple times slow but with the primer bulb that's not necessary that's what the primer bulb does some people
Can you or someone tell me the width of the tube of the attachments so I can see if an attachment I have would fit if I get one.
Where can I get one of this to buy
The cutter shuts down when i put the choke to OFF. Is that normal?
Also lot of fuel consumption... how to fix that?
The choke is labeled incorrect on these machines. That's why it shuts off and uses so much fuel. It could be the carb is out of adjustment too.
I am betting that it recommends a 25 to 1 gas/oil mixture.
Yeah, I run 40 to 1 with no issues.
Hello,
I have the same brush cutter in the video. The manual says a 25:1 ratio.
Runs good but the smoke is white coming out of the exhaust.
1.) are you saying that these cheap weed wackers usually have high oil ratios?
2.) is it true that the fuel ratios are just meant for emissions?
Thanks!
so other than cheap fuel lines and cheap head has block and carb been good? do you have over 50 hours on it yet?thanks
That scrow is idle speed
is there a link for that machine
What do you think about venor 6 in 1 or the 5 in 1
@@bobojorcas2462 Probably pretty good. This tool can do a lot of things.
End caps stops rods coming out, I'm having trouble finding the oil filter
This is two-stroke trimmer,so it dont have oil filter at all! (If that's your question?)
@@stormtrooper9404 oh that's great news, thank you so much... I Just got mine 3 months ago instructions in German lol
Still running? Waiting on mine...
Is 31cc strong engine for thick and strong bushes ?
It will be a slow process but will do it.
@@Lanninglongarmmowing is the 51cc much difference with the power?
Yeah this thing is a beast. It's a bit on the heavy side though.
@@Lanninglongarmmowing how much cc is this and cycles?
@@dr.einstein. It's either 52cc or 62cc and it's a 2 stroke.
what is the name of it? the ebay link no longer works
www.ebay.com/itm/394561553668?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nzlerx9itic&sssrc=2349624&ssuid=1txXrHSJTEe&var=&widget_ver=artemis&media=COPY
Is it still working good and would you recommend it
This looks very much like an ECHO
Im sorry whats the name of this product?
It's unbranded.
Dang still a good deal today but the prices like double
Yeah I saw the prices of these went sky high after posting this video. Coincidence, I think not lol!!!
Why was the Choke stiil in the choke position.
Probably because they're marked the wrong way round - at least on mine it is.
This one off eBay there’s one on eBay 139.99
what piece of equipment was the speed feed 450 originally bought for? I'd like to get one.
It was bought for my dad's shindawa string trimmer.
@@Lanninglongarmmowing Thats great. Thanks for the info ;-)
Howd it hold up
Still runs great. I did have to replace the gas lines in it though but other than that it starts cold on the second pull everytime.
Who Company brand ????? Name
The speed feed 450 is it 4.1 or 4.5 inch bud
How long did it take to deliver for you
Maybe a week.
@@Lanninglongarmmowing ok because I ordered mine last Thursday and it said it’s gonna be here Friday and it’s just now shipping but I’m from Mississippi
Do not waste your time on a product like this it’s a price of shit and the part where the engine connects to the shaft of the tool is easily broken and will get stuck or jammed. You might as well spend the $400 on a good product that will last more than one year
Mine still works great.
Cheap Chinese garbage. It will break and break and break over and over until it gets thrown in the trash
Still running today. I'm really happy with it. It's not a Stihl but will do the job of a Stihl.
The speed feed 450 is it 4.1 or 4.5 inch bud?
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
I have a similar, says MT52. Does well, but take a look at carburetor from time to time, mine went loose after a few tanks of fuel. Check the bolts and tighten them if necessary. Also, as the winter passed, I had to change fuel tubes, original ones were like a plastic.
The carb coming loose is funny! Definitely you will need new gas lines for this machine after 1 year. You'd be lucky if the carb lasted longer than that haha.
It's in its third year now.
The grey things are for when you are trimming with the weed eater they are shin protectors so if you're wearing shorts. or to keep grass off of you.
Thank you for this very useful and extensive review. I've just received mine today (T-Mech 5 in 1 Multi-Tool ref.10611) and when I had a look at the choke switch I noticed that they have added a little sticker with "Cold start - Choke on" (TOP position) and "Run - Choke off" (BOTTOM position) which contradicts the instructions on the original moulded plastic cover "OFF" (TOP) and "ON" (BOTTOM).
Also, when it comes to the oil-fuel mix, the ratio is clearly 1 to 40 (in the instruction manual and at the back of the engine itself). Can't wait to get this going!
My manual says 25:1 ratio and I use 50:1
Yes, carb adjust is a must, mine also was way too rich.
I bought one on Ebay, I really like the unit but it is heavy. I still use it from time to time for the brush and chainsaw/pole saw.
Those gray material cuffs or gaiters are to be worn around your ankles, to keep the weed and grass cuttings, maybe small stones, from going in your boot tops.
Can you take a look inside the auto feed strimmer head and let us know how to reload the nylon. The one I have has no holes in the spool to hold the line as you wrap the new stuff on. Cheers.
I have had one of these for about 3 years and a post hole borer with the same engine. The choke is labelled backwards, i start mine with the choke in the "off" position and run it in the "on" position.
Am jealous. Is lawn mowing season for you already. Can't wait to see how it holds up under heavy use. Maybe you struck gold twice and it's as durable as the 45cc Chinese chainsaw.
FYI I suspect you may have a third carb adjustment. There's probably a third screw in the center of the rotatory portion looking down at the top of the carb (inside the brass part). This is for idle mixture. Turn it until you get the highest idle speed, then 1/4-1/2 turns out, then set your idle speed with the other screw.
Pretty nice looking unit
I may have missed where you said it, but the manual for these says 25 to 1 mix. This is the first chinese machine I''ve gotten, but I'm running what they ask for. Mine didn't need adjustment, but it could just be by chance.
Ditto on the gas tank - never seen a tank that big on a trimmer.
I run 50:1 in mine. No issues.
I got excited about this, but can't find any in stock. Bummer
Cuts better than my old stihl
Nice set up
Can you take a look inside the auto feed strimmer head and let us know how to reload the nylon. The one I have has no holes in the spool to hold the line as you wrap the new stuff on. Cheers.
The speed feed has different adapters to fit different whips.
Your supposed to take the little yellow thing off of the gas tank and it will flow a lot faster when pouring.
On the high-dollar Stihl or husky,you have THREE carb adj.screws...
1.)Low idle
2.)high speed
3.)idle set
In 27 years,I'd like to see if your new weed trimmer is still running like new like my Stihls are.
I agree the old Stihl trimmer, made from components manufactured in Germany, can last a very long time given proper maintenance. However, Stihl now acknowledges that the great majority of components used in the current generation of Stihl products, including trimmers, are acquired from "global sources". That usually means China/Asia.
@@philliplawerence5784 If this tells you where German quality is going,the Chinese bought BMW and most likely wind up merging with KIA!!.HAHA!!.
I use a still fs100rx but dang that thing is a beast I will look into getting one
Hello how is it running now please upload another video I'm thinking about purchasing one myself thanks for sharing
How does it do working? Like to see how it does.
I'm going to say for the price you didn't get too bad of a deal if you need any replacement parts you're going to have to see it Echo cuz that looks like an echo rip off then again most weed eaters have similar parts
Close your eyes it's an Echo!
Not quite, I got one of those and they are heavy as sin. In China, they use the same engines to power their scooters, if that means anything to you.
Wrong, it's not even close to being an Echo/Shindaiwa trimmer, which by the way are one and the same. It's somewhat based on an old Mitsubishi engine design, but over the years it has been improved to where now, it shows much design and reliability improvement.
@@philliplawerence5784 I would agree, it appears to be the "Chinese" copy of the Mitsubishi TL52 engine .
My 31 cc hurts my arms. It's heavy. Switched to a 128 ld but will not discard the 31 cc because it's just to big a machine. Unless I can investigate this one.
Use a quality carrying harness, and don't be cheap about getting one. The Echo Brushcutter Harness is the best I've used. But in any case, improperly carrying ANY weight for a long time period can permanently cause back/arm/spinal injury.
52cc! That thing must weigh a TON! The Stihl KM131R is only 36.3 cc.
It does, I did some research after I bought this and they use this same engine in the the power scooters in China. But it is a beast.
Configured as a string trimmer, mine weighs 15.8 pounds with full fuel. In my opinion, use of a carrying strap is necessary, not optional. Also, the 131R is 14.1 pounds, not that much less, but it makes a whole lot less than 2.7 hp.
@@philliplawerence5784 I don't really use mine any more since I bought my Stihl Kombi system. I still use it for the chain saw attachment.
Nice
Ok, i have to know, what brand it is and where you bought it. I have a 31 cc Craftsman that was my heavy hitter with the attachments. But is it compatible with click link/ expand it attachments. It sounds just like my Craftsman. Which still runs. But blew a head gasket after 15 years. What brand is it. As a semi pro gardener I am licking my chops to check this thing out for myself.
Your Craftsman 31cc trimmer, either 2-cycle or 4-cycle, is actually a TroyBuilt, and uses the old TroyBuilt accessory attachment couplers. That makes the attachments not compatible with this machine.
For a gardener, this is a powerful heavy-duty brush cutter, and because it's so heavy it's not well-suited for light-duty tasks, such as walkway edging, small trimming jobs, cutting growth less than 12" tall, etc. But if you want to cut a road through heavy brush to where you need to trim, cut down small trees, trim 10 foot tall hedges, this is the machine to use.
These machines don't really have a brand. But the China makers will brand it anything you want, as long as you buy it.
@@philliplawerence5784 whatever, I'm using all those attachments I used on the 31 cc on the brand new Husqvarna 128 ld . Click link or expand it they all fit both machines. I don't remember what I was referring to but my 16 year old click links all fit so does my brand new hedge trimmer attachment. Fits both machines.
That really looks like a good machine.
The difference you will see is over time. The gas tubes on this machine will not last a full year. Desintegrating plastic then goes into the carb and rest of the system and you're lucky if that's all you have to fix.
Finding a good source for decent fuel line shouldn't be too hard to find.
I was disappointed, could not add comment on your 55 year old ash tree felling episode. You were right on could have used longer bar saw, and wedge cut out was little big. Ashes usually don't need wedging. But you had tricky fall, and direction achieved. Actually more interested in seeing video showing off the one or two best Ash trees you protected from EAB on your wild forested property.
You got anymore with main trunk still alive? Just consider $20 worth of drench mix applied this weekend similar to fertilizing tree. To help bring back functionally extinct species using protected scattered wild seed masting trees in the woods. Once fatal danger from "infestation level" populations inevitably passes locally after 10-12 years, treatment no longer required to keep tree alive.
Obviously option of treating your trees not to save money, as you fell and chunk out your own. But as a smart ash arborist proving to all those so called tree huggers and ecology conservationists, how so cheap & easy it was to reclaim life of iconic American Hardwood from killer Chinese bug hitching ride on crate of poorly manufactured goods.
I want to see it work
That's a hell of a steal. I just got a 27cc craftsman for the same price. no attachments other than the string trimmer. I'm assuming this isn't compatible with any of the Ryobi Craftsman or troy built attachments?
If anyone finds a sweeper attachment, I'd like to know
The Ryobi Power Sweeper does great
@@leedslandscaping2991 But the Ryobi sweeper attachment works ONLY with the Ryobi (Home Depot) products. It cannot be adapted for use with this type of machine without considerable and serious re-design. Plus, the Ryobi is a light-medium duty tool, not a very heavy duty tool as is this model. If it COULD be somehow adapted, the much increased torque of this machines engine would probably damage/destroy the Ryobi sweeper.
@@philliplawerence5784 I use mine with a Husqvarna Powerhead, plenty of power, I would not recommend electric but any consumer gas powered multi-tool should work!
Will this united take standard attachments from brands like ryobi or troy built with the standard universal shaft?
I don't know. Sorry.
@@Lanninglongarmmowing thats a safety bar for the handle is for the kick back at ya wich have that on my stihl km56r
20:50 Can't see from the video because fingers were covering it. Is the internal shaft SQUARE or SPLINE?
Spline.
How is the air filter? what happens when you need to replace it?
You can wash it with some water and soap, it looks like a sponge ring. Mine is quite clean after 6 years of use. U can make one yourself or buy it from china if needed
Thanks for your video. Just received my unit. Could you tell me where you got you replacement heads for the line trimmer a link if is Amazon a lot of units show up if I search speed feed 450 on amazon.
You are welcome. You will like it it's unbelievable how much raw power it has. As long as it says speed feed 450 you should be good to go. If I remember correctly they came from eBay.
@@Lanninglongarmmowing cheaper then a km131r with a 6 attachments wich are over $2,000