My Favorite Feature of @ableton Push 3 [ and how it changed my live setup ]
HTML-код
- Опубликовано: 3 июл 2024
- My obsession with finding a practical yet powerful live setup might have found its end.
After I found out that Push 3 had ADAT ins and outs I realized I could integrate my modular case seamlessly with it using the Expert Sleepers ES-6 and ES-3.The results exceeded my expectations.
Using the usb hub I am able to hook my OXI One and 16n for further playability , plus I can process my sounds in the same way I would do on a DAW.
What I have now is a powerful and intuitive canvas to create, record and perform.
Let me share with you how I put together the system!
This channel is supported by my Patreons, become a member here : / ooramusic
Buy Oxi One and Coral with 5% off using coupon: supportoora
oxiinstruments.com/store?coup...
Support the page by buying through these affiliate link :
US
Expert Sleepers Adat interface : tinyurl.com/bdesha73
Make Noise Mimeophon : tinyurl.com/ypkd9hpe
New Arrivals at Perfect Circuit : tinyurl.com/227dw7vu
EU
My favorite things : thmn.to/thocf/iqfskolosq
00:00 Intro Jam
02:02 The ideas behind this setup
05:50 How to support me
06:29 The setup on Push 3
08:25 ADAT + How @ExpertSleepersLtd Es-3 and ES-6 make this possible
13:50 Using external controller for mixing duties ( Slate + Ash 16n)
18:04 Why I still use an external sequencer ( Oxi setup )
21:24 Overview of the Modular system
24:30 Create and transfer your templates from Ableton Live
25:45 How to Midi Map a controller
#ableton #eurorack #push3 #abletonpush2
More Oora:
Instagram / ooramusic
Bandcamp oora.bandcamp.com
Spotify tinyurl.com/4w459x3m 
Видеоклипы
This channel is supported by my Patreons, become a member here : www.patreon.com/ooramusic
Great video... One extra tip when using the ES adat modules to send audio over to the push: it's a good idea to use the utility effect on the push at the start of the signal chain for each input channel and select "DC Filter On". That's because the ES modules are DC coupled (so you can send constant CV as well as audio) so there'll always be a small random constant offset on each channel which can cause you problems further down the line if you don't filter it out.
oooh amazing! thanks for this will do now
So timely! I just set up my Push 3 for CV. More on this set up from you in the future please!
Your English is great and your descriptions are very clear. One merely needs to concentrate and listen. Thankyou for posting. PS. Great set up.
thank you so much, I try to be clear even tho my language is Italian :)
That was great. I've got all the components to make this work and putting my setup back together after some time away. Very helpful!
Great to hear!
This is extremely helpful! Thanks so much Oora! 🎉
Glad it was helpful!
Welcome to the hybrid family buddy 🙌🏻
Great vid Frederico! The hybrid setup is the way to go, and it's so reassuring to see you getting so excited for this methodology! I have the Push 2 but it's possible with a few differences - one day I will upgrade to P3 + ES-3 (ADAT) - love your walk-thru! Thanks for continuing to be so awesome! I just bought your Perkons Sample Pack - which I'm excited to load onto my Rample (which I love). Ciao!
Thanks so much for supporting! Im having lot of fun with this setup , and the Perkons samples in a drum rack are so convenient :D
Oora, you have been killing it lately with your video’s. 🙌👏. Loved the content with the torso t-1 and syntakt!
thanks!!
great video! thats a dope setup!
Glad you like it!
very nice set up, this was just what I wanted to look at as I have all the gear, I just need to connect it all together so it works how I want it to 😳
Have fun!
Nice setup Oora! You may be close to crossing over as a hardware/software instrument user. Be careful, i fell into this trap when I discovered how to pipe my slate & ash instruments through VCV rack and hardware modules. This now allows me the opportunity to have my favorite Slate/Ash instruments do things they could not do on their own.
Using hardware instruments to push software instruments beyond their own limits has me pretty excited.
Good luck with your newly found workflow potential!...it seems there may be a lot of
ideas/creativity waiting to be found.
oh man that's exciting! I would love to use slate and ash , I have the full suite
Nice setup. I like this one very much because it's limited in pieces of gear but with a lot of possibilities. A modular case + some groovebox/ableton clip launching is very complementary. I do a similar thing, only that instead of push3 I use an mc707. I think it's important to limit yourself with what you will do with the push3 because it's so inmensely broad. 6-8 channels is more than enough.
Great video as usual Oora! Would be interesting to know how clocking between modular and push 3 is handled. Also if you experienced latency issues and how they were addressed in push 3. Thanks again!
so far no latency issue and clock is handled by oxi slaved via usb to push!
Great setup! The 16n is nice for more direct control of push for sure. I wish the push would have two adat I/o ports, I have used up all my channels quickly for my setup where I use a Buchla Music Easel with the Push 3 and Model1 mixer. Similar idea to yours although I use Push more for looping. Cheers!
great music on your channel! I am curious how you interface the model1. I have it too and that is my next step, id love to do a dub setup using push and the mixer. Are there any adat - db25 interfaces?
@@OoraMusic thanks and great chatting with you. Catch up soon!
Oora👍
Thank you for your help to understand Push3 Standalone workflow. May I make a suggestion for your channel?, could you make series of videos about How to use Ableton push 3 standalone with one midi controller & one basic synthesizer with direct connection. (please don’t use modular synthesizer because it is too complicated for many people, lets choose basic synthesizer model like Moog 37 or Roland Boutiques) after that continue with adat options & usb hub scenerios. One question could we use standalone push 3 with powerbank for outside 😎 & what kind of powerbank should be?
great tutorial as always! Did you also had a look into Intelijel Quadrax? So you can do 4 envelops and you can control them via cv. So you can send one cv from the oxi to control the amplitute of 1 envelope. Would might save some hp. cheers from Dresden :)
I’d probably use the cv out on push and save some space on the modular. Otherwise great stuff. Hope to see more push content. ❤
it is definitely a possibility if you use one voice or two, but at the moment I need 12 outs between gates and cv. could be cool if someone would create a breakout box for pus with adat ins and out and cv ins and outs!
@@OoraMusic it makes sense then. 8 from adat plus 4 from push should do the trick. Btw, have you seen Octawave from Datanoise? It provides 8 outs.
Thanks sir... There's so little push 3 / es / CV content that shows a good way to work with it.
I have an SL mixface which hopefully will work OK with the p3. 16n looks cool but slmixface has rotary as well as faders. But I've yet to try it.
My ES modules are on their way at last...
yes I am working on more content about that
@@OoraMusic great thank you
@@OoraMusici have my modules now and thanks to you for making it so easy to understand.
I now want to see what the various CV tools can do and be used for. Exciting!!
Thanks for the great video (as usual...).
I hope you will make a detailed video on ADAT connection. I tried it on mine (ES-8), it didn't work.
I saw in another video that you have to connect the IN to OUT and the OUT to the IN?
This is quite counter to my logic...
I am working on that!
Does the Slate + Ash 16n send stable MIDI CC messages out? By that I mean, does the CC value stay fixed when not moving the faders? I tried a clone of the 16n faderbank before, but it kept sending out MIDI CC changes (small fluctuations, like +/- 1-2) even when I was not touching the faders.
I believe that was addressed in a firmware update for the 16n - though I don't know whether that would apply to your clone.
Hi, can you use only the Es3 to have 6 audio ins more with the Push 3? Or you need to have the two modules connected?
great video and great setup, what kind of cables do you use?
the white one? those ar my volts and black market modular
Nice video!
Could I know the model of your little fader controller?
Thank you
it is the 16n I bought from slate + ash
Gracias 😀@@OoraMusic
Nice setup. What patch cables are you using?
a mix of Myvolts Halo and blackmarket cables
Would it easy to include external pedals as send fx on this setup?
yes, is something I will explore soon
@@OoraMusic Thanks, great video btw!
Did you end up selling your culture vulture? Im currently deciding between the culture vulture and the modular channel, or maybe both.
Do feel they cover too much of the same ground to have both?
Is there anything you miss about the Torso T1?
The happy accidents, that machine is unique for that
you make music with the best stuff... that what you do is not the base setting was people can pay for it,... make two steps back wards and concentrate of the kind of good sound without this perfomance shit.... back to the root my friend... higher is not the right way... I understand the way with the most expensive synths.. but shy on me this is not the setting what normal people can reach.....
for me is more interestead you produce a proper album or something and please stop the to provide the industry and produce a piece *shit.... you are a marionette of the industry... kiss you brother make a proper album what reach the soul of the people... this is or your decision is you are a puppet from the industry .... your way @ooara
First , I love what im doing. Second, I have a Patreon where I do track from scratch and also created an EP in many lesson. Would you pay for that? or you just want FREE content and also have the entitlement of criticizing it? Before writing comments like you did, maybe think what are you doing to support the music community and the creators you like. Peace!