AIRRIVL Reeesekelly thanks for the kind words. I'll probably be doing a full how to series in the future this is sort of a quick preview to show what's involved
Love the video of what you been doing all fittings and doing stuff make the car air bag low looks so good as I wish if I had it on my car as it is illegal that I hook my trailer on
There's lots of bags available but these were my old style SLAM2700 bags but now i run my DX2600 bags same size etc but can run those or dominator 2600 or Slam SS7 or RE7 etc all work for VT-VZ
who puts vy mirrors on a vx? not suited at all. they vy mirrors suit a more flat looking shape like the vy/vz. terrible condition car, inside and out those exhaust dump pipes just make it noisier. cheap looking simmons wheels which are open spoke which show those pov garden variety single/twin piston brakes. if your going to have open spoke wheels at least have a set of 4 piston brembo or AP Racing calipers behind there. The bags work well. should also have done the front.
Where did ge buy this car from because I could swear it was mine from Sydney I sold it about 18 months ago ......if it is my old one it's good to see it's still in great shape I do miss it though
@@bradleyhogan8017 ohh ok thats cool its very nice man I had one a long time ago and it was honestly its twin I had white simmons but that would be the only difference
@@seanchaseunit1377 I wanted the white Simmons but I wasn’t going to wait like 6 months for one them, does the white or gold look better on the purple?
You can roll aired out but not legally anyway have to be over 100mm at lowest point here in Aus so bags allow you to get to the exact height you desire no matter how much load is in the car such as people or towing etc plus let you be at a lowered height while being able to get in and out of steep driveways etc but wiring out is deffinately only for parking yes.
D2i Automotive Yeah sweet I got a vz and would love a setup like this for the rear how much would that put me out even if I stuck to valve and no compressor?
@@sashjovanko9598 there's heaps of options available so best to inbox my page on Facebook d2i automotive and Engineering and depends if you want kit only or installed
No airbags are legal if you adhere to all requirements associated with them. Dot approved fittings, Height control auto-levelling system, Maintain 100mm at all times in motion ( handbrake linked ) must retain 2/3 original suspension travel, Nothing to fowl or bind during full motion of air assembly, Engineer inspected and approved ( mod plated)
@@DOMTHESAUSAGE in the current state no will need autolevel upgrade and a few things changed but it can be with extras bit easier to do that all at once the first time round
@@projectnuggetlucas4737 the bump stop gets completely cut off so then there is a flat plate where the bump stop used to be and a circular hole from where the bump stop was so then a weld in square nut is welded in and the bag bolted in from there
Авто/Мото
This is mint I have been waiting for someone to show how it’s done properly for commodore, great vid great footage well done
AIRRIVL Reeesekelly thanks for the kind words. I'll probably be doing a full how to series in the future this is sort of a quick preview to show what's involved
Love the video of what you been doing all fittings and doing stuff make the car air bag low looks so good as I wish if I had it on my car as it is illegal that I hook my trailer on
Where did you get ur airbags from? If you don’t mind me asking, I’ve been looking everywhere for the ride one
There's lots of bags available but these were my old style SLAM2700 bags but now i run my DX2600 bags same size etc but can run those or dominator 2600 or Slam SS7 or RE7 etc all work for VT-VZ
@@D2iAuto what airbags would you personally put on a Vz sv6?
@@lukewhitaker1060 my standard is my dx2600 or slam ss7
who puts vy mirrors on a vx? not suited at all. they vy mirrors suit a more flat looking shape like the vy/vz. terrible condition car, inside and out those exhaust dump pipes just make it noisier. cheap looking simmons wheels which are open spoke which show those pov garden variety single/twin piston brakes. if your going to have open spoke wheels at least have a set of 4 piston brembo or AP Racing calipers behind there. The bags work well. should also have done the front.
you’re a loser😂 why judge the car when you could only dream of havin one😂keyboard worriers😂
Where did ge buy this car from because I could swear it was mine from Sydney I sold it about 18 months ago ......if it is my old one it's good to see it's still in great shape I do miss it though
No clue sorry mate
I brought the car dead stock, everything that you see I’ve done
@@bradleyhogan8017 ohh ok thats cool its very nice man I had one a long time ago and it was honestly its twin I had white simmons but that would be the only difference
@@seanchaseunit1377 I wanted the white Simmons but I wasn’t going to wait like 6 months for one them, does the white or gold look better on the purple?
@@bradleyhogan8017 i prefer the white I think it looks classy as but the gold do look good aswell
Can you please give me some help with my vy SS Commodore TCS stays on after electric fans go on
I wouldn't know to be honest but ABS module can have a lot of issues with Fans and TC and is a common issue with commodores
When it's all the way down Is it touching the fender so it is just for parking and looks or can it drive all the way bagged like that?
You can roll aired out but not legally anyway have to be over 100mm at lowest point here in Aus so bags allow you to get to the exact height you desire no matter how much load is in the car such as people or towing etc plus let you be at a lowered height while being able to get in and out of steep driveways etc but wiring out is deffinately only for parking yes.
D2i Automotive Yeah sweet I got a vz and would love a setup like this for the rear how much would that put me out even if I stuck to valve and no compressor?
@@sashjovanko9598 there's heaps of options available so best to inbox my page on Facebook d2i automotive and Engineering and depends if you want kit only or installed
What is the colour ? Is it cosmo ? I have cosmo vy ss but this ome looks alot brighter , maybe a candy ?
Yeah I think it was either a mixed colour or different base not sure on what colour it was sorry
@@D2iAuto cheers mate , not sure what it is but i love it 👌
@@iswhatitis1754 phantom purple from the ba falcons
What bags has it got? Do you have a link where to get them? :)
Has my own kit installed message my page on Facebook or visit my website and send a contact form
How much would it cost to get this? & Where are you located?
Base kit Onboard prices start at $2500 supplied and fitted and Ballarat Victoria
i thought air bags are illegal in aus but pls tell me if im wrong
No airbags are legal if you adhere to all requirements associated with them.
Dot approved fittings, Height control auto-levelling system, Maintain 100mm at all times in motion ( handbrake linked ) must retain 2/3 original suspension travel, Nothing to fowl or bind during full motion of air assembly, Engineer inspected and approved ( mod plated)
@@D2iAuto thanks cos me and my dad were wondering
Who in qld can put it air bag suspensions?
Not sure sorry I'm in Victoria
Can you post a link?
How much do You guys charge for Holden VE Rears only air suspension kit?
Pricing starts from 3700 supplied and fitted for ve rears
Do you have a template to drill the holes into the body ???
Yes I use a template
D2i Automotive did make your own template or did you get it with the kit
@@p0rk7801 this is my own kit but yes I made my own template for doing them
What did you weld on the control arm before you sat the bag in ??
@@p0rk7801 a square plate with a thread in the middle for the bag to thread into
What roofspoiler is that
I have no idea sorry was a customer's vehicle
Absolutely Beautiful mate
What roof spoilers that
do you provide engineer cert after install
If it's a setup that can be engineered and they pay for it yes
@@D2iAuto so this setup cant be engineered
@@DOMTHESAUSAGE in the current state no will need autolevel upgrade and a few things changed but it can be with extras bit easier to do that all at once the first time round
Hey, how did you remove the bump stops?
They get cut off and the bags bolted straight in
Oh ok, is there a hole on the bottom bump stop to fit a bolt or did you need to drill one?
@@projectnuggetlucas4737 the bump stop gets completely cut off so then there is a flat plate where the bump stop used to be and a circular hole from where the bump stop was so then a weld in square nut is welded in and the bag bolted in from there
Ah! Ok, I have watched this video about 10 times wondering what the welder was for lol thanks man
Mint af