Ford F100 Replace Floor Pans and Cab Mounts For under $200
HTML-код
- Опубликовано: 15 янв 2023
- #fordf100 #fordtrucks #classictrucks
In this episode we show you how to replace the Cab Mounts and Floor Pans quick and easy. We take a look at the new parts and get one step close to having a truck that anyone would be proud of. We appreciate you watching and following along with us as we rescue this 1969 Ford F100! 
Авто/Мото
I’ve never done a cab mount, but you made it look simple.
So glad that part is behind us. It is a ton of work. But the ole Ford thanks us for the love we are giving her. Thanks for the words of encouragement!
She's looking good Mike...One day at a time!!! She's gonna be a good driver once your finished.
Thanks for the support, it will get there a few more big hurdles and she will be on her way!
Thanks for showing this process! About to do the same project on my 74.
You are welcome, if you run into something and have questions hit us up we will help if we can.
I have a 69 f100 shortbed. I really enjoy your videos.
We appreciate you watching the ole ford is slowly coming back! Stay Tuned we will make it into something great
You did great. Good job on the video too
Pretty happy that part is behind us, thanks for the support we have Epic plans for this old Ford.
Great video!
Thank you!
nicely done !
Thanks it was a good amount of work but it turned out pretty good
Where were you people at when , when I was ask ? On repairing body rust, now I am putting back on body bushings,and all the know it all are showing up..
We are here for you! Been here the whole time.
I'm doing same on a 78 f 100 stepside. ..on the top lip of New Mount you put screws to hold it in place to hold it tightly for weld but is it OK to leave the screws in ?
After welding in place I took the screws out and welded up the holes.
Is there a reason why you welded in the cab mount first, and then the floor pan after? I need to do this soon to my crewcab.
And second, did you flange weld or butt weld the sides and rear of the pan? If so, why did you choose that route. Appreciate the info.
It jUst seemed a little easier to position the cab mount and weld it first. We left a flange and tried it both ways punched some holes in the new floor pan and plug welded those but in the end wound up welding it continuously around the whole pan taking our time of course to keep the heat down. Thanks for watching and good luck on yours.
Alsome work guys
Question for dentside gurus: my 79 f150 is pretty rusty but the frame and drivetrain are good so I want to fix the rust up on the cheap. So my drivers door is binding and won't open. Could it be this cab mount or what parts should I check?
You can tell if it’s the cab mount by checking the gap at the fender and drivers door. If the gap is wide at the bottom most likely cab mount. Our cab mount was rusted away but the door opened fine. Maybe check your hinges and Striker. Thanks for watching!
@@OrangeWiresGarage thanks for the ideas. Hopefully I can realign and repair everything without needing a different rust free cab!
@@the_truck_farmer Don’t go down the rusty road if you don’t have too! It seems like it will never end LOL
Hey Mike!
1. Where did you purchase your floor pans and cab mounts?
2. Did your replacement cab mounts and floor pan fit correctly or were they a bit off?
Hey Corey. Picked those up off eBay honestly they fit pretty good but did have to fiddle with them a bit. Overall though I was pretty happy with them
@@OrangeWiresGarage - do remember the eBay seller you bought from? Was their shipping rates reasonable? I'm from Canada 🇨🇦 so that's an issue I'm worried about plus exchange rates and duty charges.
@@corylechner8303 motorcity-sheetmetal was the seller here is a link www.ebay.com/itm/255773362705?hash=item3b8d47ca11:g:ZzwAAOSwwYlh7GUO&amdata=enc%3AAQAHAAAA8MATQEpig7bVeQxvYHsKn1m9HiSBWaaeipesRuqLcQkxN%2Bw28clWOasxy4v%2BsddWkZiQyX%2BhMVAnFZZGMZfaXyj0785KFmdmVi5YRaJXQNavW%2BQZx5c9LNoKcK8QAxKNMfcnSQJamxwm7XXKsvcF2Bn3OuAjfcUEpfiLJX6fA58TjF2X%2BM3IjjPOp3sIGXzVNutDwQPckB02SAhBGO91OuUzxci6CsTlJG21Ilh6hMXAxTCgMz0u0aUSS09UFFMYOwBP4oG4fdhe1N%2Fb0mz2TQ2syDTBLLRwH95sCDGWmaHVQqZb7Ww9zPg2JupsIU4ntA%3D%3D%7Ctkp%3ABFBMsIeE1N1h
@@OrangeWiresGarage - drat! I see they don't ship to Canada.
@@corylechner8303 check with carolina classics
Ah under 200 if you already have all the tools lol makes sense if your coming to the video probably.
True statement! Thanks for watching