3. I made an angle grinder circle cutting guide. From a suction cup!
HTML-код
- Опубликовано: 26 июл 2024
- Info: www.instructables.com/id/-Ult...
Made a simple circle / arch cutting / routing guide.
It works with non- ferrous metals too, and also with wood.
Its a prototype for commercial uses, but i tought that i should share the idea for the diy people too. :)
Used 3M cubitron 2 cut off wheels to cut steels.
Aluminium is cut with 3M silver cut off wheel.
-Its made for to be used with inox & steel, but works nicely with aluminium too. If you want to use only one cut off wheel, this is a good choice. It cuts nearly every metal.
Thanks for checking this out.
#metalworking #woodworking #diy #hack #theotherfinnishguy #tuomassoikkeli #anglegrinder #router #compass #circle #arch Развлечения
How to make stand of hand cutting machine
I have plans somewhere, I'll post a link when i found them.
Here: www.homemadetools.net/forum/ultimate-circle-cutting-guide-72402#post131497
Man, that's genius. 👍
A circle cutting jig for multiple tools, bloody brilliant, mate👍
Thank you very much Bill!
This is it. This is what I was looking for. Thank you
This is the best one I've seen.
Great idea I need to cut two concentric circles and Ive tried freehand with snips, then with a grinder and they all looked very rough. This makes such clean circles, I want to copy your idea and make a jig like that too. Thanks!
Good 👍
I am from indonesia.
This is fantastic, pure genius!!!
Thanks Tuomas.. this is really a problem solver!!!
this guy sleeps with the angle grinder under his pillow. nice job bro
Nice job on the perfect circle cut!!!
Thank you for sharing your handiwork!
Que show parabéns amigo.
Superb idea ... Very lucky to watch your idea
man, i have been looking for a solution like this for ages, this is No1 Engineering, you should get this patented if not already done so!
Great idea!
Love it! Thank you
Все гениальное -просто и лежит на поверхности , вот только надо правильно смотреть и делать, молодец мастеровой!
This is Great idea, you are a genius, thanks for this video, greetings from Colombia.
Fabuloso el el acesorio. Saludos.
Wow incredible 👍👏🥇
Thanks
Brilliant
Very good! Thanks for the idea.
Great that you liked it. Thanks for your nice comment 👍
Genial idea Máster 👍👍👈
good way !! it can be regitred as a paten
Fantastic video.
Thankyou you just solved a problem for us
nice and simple 👏👏👏
*Very nice and useful*
Nice work and hello from Las Vegas millwrights USA
very nice!)
Великолепно дружище!!! 👍👍👍👋👋👋
Nice video and cool idea, are you going to do anymore carvings, I've seen all of them several times each..lol
Wow nice one, can you help with details of all you used please
👍👍👍
Great
Thank you very much!
Very cool idea and works very well, I just purchased a very cheap plasma cutter online for doing this kind of thing, will do a review soon to see if it does its job.
And did you check out the ballistic knife I uploaded ?, I thought it was a pretty cool job.
I may possibly make one from an aluminium handle, but can't wait to see yours.
👍👍👍👍
I haven't watched it. But soon i will.
I like it! Can this work and cut a circle in 1/4" metal? By the way... Who's the other Finnish guy?😁
Very nice. I thought maybe you were making a shield to go with your battle axe from the last video LOL. Do you still have ice and snow??? or did you film this a few weeks ago?
This is made couple weeks ago. Snow is now nearly disappeared, temperature is about +10 degrees of celsius atm. I am now sitting on front of the window, and enjoy sun warming my face. 😃
Now this is clever. I just watched another guy destroy a pair of perfectly good vice grips to make a flycutter... which he tried to use "handheld". Some people are good at being inventive and others are just attention whores. Thank you for being in the first category. Consider yourself liked and subscribed.👍👍👍
For non ferrous material that is still metal you can use a magnet underneath the table and it will hold both the jig and the material. Atleaat thats what I do
Great invention BTW!
what's the smallest size hole you can do?
If you needed to cut a circle that same diameter from thicker plate steel, like 1/2", would you use an angle grinder?
No. Torch or plasma. Maybe, if i need only one piece, i might use an angle grinder. Otherwise it would take too much time and wheels. When cutting circle, wheels makes wider groove, and wears out faster.
Kiitti vinkistä. Ajattelin tehdä pistosahalle saman imukuppiratkaisun niin saa alumiinikaaria tehtyä helpommin.
Hi I have judged started making mops in my backyard but I have had challenges with handle holder . I can't cut the metal in circles i end up just making rectangular shapes. I have been wondering if i could find something like what you have just made in the video. Is it possible to sell me one ? I am based in Zimbabwe in Africa .
Do you have a parts list of this or a how to build it video?
www.instructables.com/id/-Ultimate-Circle-Arch-Cutting-Guide-/
Could you please tell me where you got the suction cup and what brand it is ?
m.motonet.fi/fi/tuote/765143/Imukuppi-nostoon
Here you can find one from any hardware store.
Лайк это конечно good, но как её сделать!?
How can I buy one from you?
I am in Canada. Thanks!
How small of a circle could this go down to?
140mm radius is the smallest possible.
I would like to purchase this from you, or for you too make another $$$$ how do we do it ?
Huippu video 👍 tuommostaki ois tarvinnu monta kertaa 😆
Kiitoksia. Alunperin tein pienemmän kun halusin kaivertaa dremelillä ympyröitä ja kaaria ikkunoihin. Hoksasin sit et helv..
@ hyvä idea... Myös se tremeli leikkuri 🤔😆
And how can I get the parts please
how much ? I want one ( with post to Belgium) payment in advance no problem
What would happen if you just let go of the jig and the grinder? 🤔
It starts to spin. I tried. 😂
What is tha name of this machine? What is the cost please
www.instructables.com/id/-Ultimate-Circle-Arch-Cutting-Guide-/
Can you make a video of how you made that .step by step pls. Thank you. AWESOME!
Here is more info from it.
www.instructables.com/id/-Ultimate-Circle-Arch-Cutting-Guide-/
Will you sell it for $30. USA. Not the grinder it the other pic for the router.
Is the commercial use expected soon ?
Not from me. I just share my ideas.
@ in the description you said ''prototype for commercial use" ?
Make me one I'll pay you.
Can you build me one of these?
Price details information video shoot please
www.instructables.com/id/-Ultimate-Circle-Arch-Cutting-Guide-/
Как сделать присоску?????
купить)
@@webweaqwe6890 у меня руки из правильного места иначе не стал бы смотреть таких блогеров!
How much will you charge to make me one?? I Love it. You're a genius. Pls reply. Thank you. Have a great day. ( FANTASTIC IDEA. THEY SHOULD SELL THIS IN ALL BIG BOX STORES. OOOH MY GOD!!
Thanks for the comment. Little difficult to say the price.. where do you live?
I live in Elgin Illinois 60120.
I have the grinder I just need the ( grinder machine or grinder holder. I don't know what to call it. But the amazing tool you made.