FDick 12" Oval Dickoron Polish Steel
HTML-код
- Опубликовано: 6 окт 2024
- I have a detailed written review as well, posted on the product page at the link below.
www.tigerchef....
Lots of thanks to the folks at TigerChef.com for providing me this item to review. If you are shopping for this item, please consider them. They have a low price guarantee and will price-match. And from my personal experience, their prices are usually well below other sites.
It´s actually a very good looking steel. That bright blue handle with that polished steel looks great. I have the square shaped dickoron kombi steel and I absolutely love it. Few strokes on the sapphire cut and then on the polished side and the knife is sharp. If I qant to cut some tomatoes I just hone it on the sapphire cut side to give it a little micro serrations
TheStromxxxx I have the same steel at my job! Do you sharpen on both sides with light pressure?
yes I use light pressure. Like with all the non abrasive or light abrasive honing steels the result depends much on the initial sharpness of the knife
Fantastic steel, I recieved this last week. I have the dick titan, dickoron classic 2k regular cut and this. Save needing to use a stone alot.
Excellent presentation!! By the way, could you name a few of the best Oval Diamond sharpening Steels 12" and the most useful grit...Thanks, Laszlo Montreal Photog.
Please subscribe if you find this helpful! This helps me get more products to test and more videos out.
Hey,
Please Can u tell me what is the most useful between Dick micro and Dick polish. I use different knive 56-58HRC and 61. Work in kitchen and use also whetstone. I hesite so much between them.
Thank u guy
Beautiful
Be carefulwith the ring it can stretch apart and come off the steel giving you no way to attach the steel to your belt and the tip of the steel can chip easily revealing the soft metal underneath
That is just a plain lie.
Amazon has them?
Hi guys,
Which should I choose?
Micro or Polish?
Mostly I have japanese knives, 60-65 hrc.
Thank you
Micro
do you have a shorter one of this kind, compatible for a 6inches boning knife for industrial use.
I think it's also available in 10", which should be perfect.
I need something when I am field dressing deer and elk and I just want to purchase one steel or the diamond sharpener. I usually use a 4 to 4.25 inch drop point blade. Usually A-2 or CPM 3V steel with Hardness: 58-60RC. Which would you recommend?
For a short drop point, a diamond steel is the way to go. I'd suggest a fine grit one (the fdick one is a good example). Depending on your budget, you may also want to look at those belt-style electric sharpeners.
Are you planning to carry it with you in the field when hunting? If you're only field dressing one deer or one elk out there, I'd suggest sharpening ahead of time to avoid the extra weight.
Cos yes, I would have it in my backpack I wear while hunting. I'll take a look at those diamond ones. Thank you for the fast reply
Will the diamond give me years of service? I want something to last many years.
The diamond steel itself will last a really long time. Make sure to scrub it with a brush and soap once in a while so it doesn't clog.
They are more agressive on the blade, and could also result in a recurve forming on the profile with extended use. Especially if you go with a coarser diamond steel, which is why i avoid them on kitchen knives.
On the other hand, short drop point blades don't have a large flat section on the profile to worry about. And they are subject to a lot of abuse - mine get chipped and need re-profilling all the time. Something else will damage the edge before the diamond steel wear becomes a concern.
Hi, I'm slaughterer. I'm sticking cows, steers, bulls etc. I just bought this polish steel but I don't think its work well on my job because I think I'm cutting quite rough stuff. I don't know if you will agree with me. So can you suggest the best steel for my job? I'm thinking about to buy g. Dick dickoron micro steel with ultra-fine cut. Is it OK? Tq in advance
Just get the dickoron hygiene, it's best one round or oval stainless not carbon coated like most of the dickoron.
Moro no Brasil
Posso comprar?
Tem no mercado livre
@@jonasrocha7758 desse modelo mesmo?
@@rogerioguedes6870 sim comprei uma igual paguei 700 reais
Your Tromontina of All the beast knifes bro.
Как заказать и сколько стоит
Where i can buy this sharpenner?
Tigerchef.com has them.
How this money plz
$104 at the Amazon ATM
I read a amazon review that said it was coarser on the other side.is this true?
No, both sides are polished smooth on this steel. Perhaps the reviewer was intending to comment on a different item?
Note, one side has the manufacturer's logo etched into it (near the handle, as you can see in the video). Make sure your blade edge doesn't touch the etching as you hone.
Can I have for free 😂😂 please
It never hurts to ask :). Unfortunately there's not much I can do (since I don't work for the manufacturer or any distributors).