The $20 Stone In this video is back in stock➡ amzn.to/3KeXXF1 Review here➡ruclips.net/video/06OW8ahqZDg/видео.html Jeweler’s Loupe ➡amzn.to/3Kgx9E9 Purchased with my own money but⬇ Amazon affiliate link. As an Amazon associate I earn from qualifying purchases.
Amazing content and photography, you should compile/author a book utilizing all your photos on the subject of sharpening. Speaking of books, can you recommend any books on this subject (maybe some new video content on recommended reading). Your content and presentation format are fantastic, thank you Sir. You are making the world a better place, one edge at a time. My Sypderco Military's CMP S30V blade is wicked sharp thanks to you. 👍
Could you please recommend a good diamond paste. If you provide an Amazon link I'll order some. I've had great success using the stones you recommend, now I need a good diamond stropping paste. Its difficult searching through Amazon as many of the pastes are in a spray form, I'd rather use a paste in a syringe.
Modern day myth busters lol, I feel as if you may be getting close to breaking the internet with these space age thoughts 🤣 thanks for showing and the time invested it is greatly appreciated 👍
I was so full of myself to think that I can feel any burr with my finger or see it with naked eye by turning the knife a bit and catching the reflection of light from the edge. But I took a knife that had no burr (I was absolutely certain) and looked at it through jewelers loupe and surprise-surprise super small burr was still there! Few more alternating passes on extra fine DMT with pressure less than the knife weight and then 1 micron diamond strop and I got my first ever hair whittling edge! First time after 2 years being into knife sharpening. Cant believe that what I was missing is simply using as little pressure as possible at the end. And I WAS reducing pressure, I just didnt realize how little pressure I actually needed. Big thanks for your contributions to the knife community. Your videos are the best.
I wear my lighted dental loupes when sharpening. When stropping, I can feel the burr"scratching" the leather. When the scratching stops, the burr is usually gone. I have to watch your videos twice. Once to gawk at the incredible magnification views. Once to actually listen to what you are saying. THANK YOU, Alex!!
There can still be a micro burr after the scratching stops. Extremely small burrs that are straight (not favoring one side) can go by undetected with this method. Observe the apex closely (rotating the blade and observing light reflection), constantly feel the apex and get used to the feedback on your thumb pad, as to how a burr versus a burrless apex feels, observantly feel how it cuts through paper, glide the apex across your thumbnail and check for resistance, etc. all good methods, especially when combined, at finding the smallest and peskiest of burrs. And your loupe is a big help.
@@oceanwaves83 Initially I use my thumb pad to feel for the burr, then I look at the apex for any light reflections. When I get rid of those I then run the end of my thumb nail gently along the edge; this picks up any straight burrs that are usually removed with gentle stropping. I have just ordered a 60/90 magnifier as used by Alex in this video; I'm hoping I can step things up a level.
Hello from Ireland. Just wanted to say thanks for all your efforts and teaching! I had tried a few times in my life to get good at sharpening and sucked at it, but your videos helped me to learn how to get an edge using the crap stones I had and after a while I got some diamond stones and made a strop and it's made a huge difference. It's a life skill I'd always wanted even though I'll only really use it for my family/friends kitchen knifes. It's nice to be able to have a few good steel knifes and not need to bin/live with crap knifes. Thanks again, I'll send whoever is interested your channel's way. Hope you go from strength to strength.
Alex, would love to see a “closeup” video of what’s happening to the edge during common mistakes (varying sharpening angles, over angles stropping, over aggressive pressure, failed apex’s, etc).
It doesn’t get any better or clearer than this…a strop with the proper compound is your best friend when sharpening! Outrageously good photography..next level! Seeing is believing..Thanks Alex ..awesome video MikeR. 🇨🇦
I kind of feel like on in a class when watching your videos. I fully understand this particular video. I once had this exact problem until rather recently. Your videos guided me to really recognize the burr and work properly to remove it. I still haven’t gotten to Hair whittling yet. More practice…
Just received and unboxed my knife sharpening kit. I was inspired by you and I know that all of your great videos will help keep my kitchen knives in top form. All the best. Cheers.
I've been watching sharpening content for a long time, but this is the first video that explicitly showed burr removal. Also discussing the relationship between the last stone used and the stopping compound chosen is very helpful.
A cheap little 50x-1000x digital USB microscope for $25 was such a great tool for helping me understand my sharpening results. It really helped me get a feel for how much pressure to use as well as how burrs actually worked and the differences between diamond stones and whetstones and fine grit vs coarse grit. It taught me so much about how tricky burs can be with their false edges. Your channel and advice is spot on; I have also come to the same conclusion that diamond stones are the way to go rather than whetstones, and I also prefer getting a refined apex on a coarser stone. I too have experimented my way into preferring the method of apexing on a coarse stone, and then alternating edge-leading passes with lighter and lighter pressure. However, one last thing that I do to minimize the burr before the strop is I skip from my 300-grit diamond stone to an 8,000-grit diamond stone and do very light pressure alternating passes as well. I find this helps me maintain the geometry a little better than the strop. However, I am definitely not practiced enough to do any of this freehand like you, so I am doing this with a sharpening system that lets me get incredibly consistent customized angles, but still all of the pressure and movements are by hand.
Some diamond stones have contamination by few coarse crystalls. DMT 600grit that I use unfortunately have I guess around 20 bigger individual "dents" that tend to ruine surface, in fact, making it worse than prevous step 320 grit. I can clearly hear clicks and feel stops when trying that 600 grit. I tought they will split with time but in reality they strong as new even after many attempts. Maybe I will try to eliminate them one by one making 2d map and burn by sun light with magnifying glass or scratch it other way, no idea how. It is definitely nice idea to use nickel/steel diamond stone at low grit and go for resin embedded for finer. So, I fear to buy 1200 or 8000 DMT because of contamination risk. Not big deal really, 220+340 actually already so nice, easy to use.
@@matthewdale2212 I use a setup like the wasabi sharpeners with an upgraded metal bearing, and the DMT aligner-style stones, and I just use my iPhone level to get the angle. I have found that with proper geometry management, those systems can work well, and it realistically costs easily less than $50 to get everything you need. First I find the exact center of distance between the knife tip and heel and mark with fine point marker. Then I align it on the clamp (on which I also draw a center line) and then I make sure the knife edge centermost to the clamp is at an exact 90º angle from that centerline at the center point. I do not recommend doing any of this by eye, as I have found that the larger area of the heel and the narrower area of the tip can be extremely misleading to the eye (I find my brain likes to gravitate towards center of mass instead of center of length). Then I dial in the fulcrum screws on the clamp to make sure that the knife angle is virtually identical from both orientations of the clamp. Once I have established this, I set my alignment height for the sharpening rod at exactly 15º from the center point of the knife edge. I do this for consistency so I am not accidentally sharpening and different angles when sharpening the same knife months later, and it lets me get consistent apexing in subsequent sharpenings. I just zero out my phone's level against the level portion of the clamp base, and then measure the 15º right on top of the stone clamp as it rests on the knife edge, so I know my angle is extremely accurate and representative. I also screw in some stops below and behind the alignment screws for the height adjuster so that the angle can't accidentally change during the length of the sharpening. This way I can switch out stones without having to reset my angle. It sounds fussy, and it probably is, but I personally do not think hobbyists like me have the skill to freehand consistent angles without doing it almost daily like a professional, and I am happy to spend an extra 10 minutes setting up my sharpening system if it means that I can save loads on "professional" sharpening costs. I'd rather not ruin hundreds or thousands of dollars of knives because I wanted to be hardcore and oldskool. Plus, I also have the mental benefit of being able to use my kitchen knives with "reckless abandon" without those intrusive thoughts in my head warning me that I need to try to stretch out my time between sharpening. I don't want to be buried in fear while I'm using the things that are supposed to bring me joy and love, so being able to find a simple and dependable solution to keeping my knives sharp is absolutely worth the additional mental benefits on top of the financial ones. Plus, even an avid home cook probably only needs to sharpen their utility knives like 3 times a year at most, so I'm happy to spend an extra few minutes a year accomplishing this. And my other "non-daily" knives like boning/paring/filet probably only need sharpening like once a year, if even that.
I know why my freshly sharpened knife gets blunt quickly. Because my wife keeps using it to cut the kids fruit and sandwiches on ceramic plates every morning. 😭
OMFG. I think you just changed my life. I've hand sharpened and carried a pocket knife for about 30 years. I can always get mine very sharp, but I feel like they dull quickly, I always thought, well I sharpen too a fairly shallow angle guess that's to be expected. I tried this and I think I 100% have been just folding my burr. Thank you thank you!
He didn't changed anything. Knife with burr is sharper than knife without. And when the burr get to a side it disapeers quite quickly when you continue to cut and at that point the knife gets sharper again. Usually good knife never get dull if you use it correctly. It gets sharper and sharper when you cut.
This is an exemplary way to explain what burrs are and why it's so important to remove them. Bravo! Your macro photography really brings the point home.
I like to think I know how to sharpen a piece of steel. But this, this was a GREAT deep dive on the topic. You really laid out how the process progresses. We'll done.
Simply masterful. This stands so far above similar channels with its rigourous scientific approach, intelligence, clarity of explanation and quality of presentation. So many other channels suffer from long-winded, unclear, over-excited presentations and this one is a breath of fresh air. I come from a scientific and educational background and this is outstanding. Thank you.
Master class in knife sharpening, making my decision easier to buy a stone and begin my knife sharpening journey. Thank you for all the work you do to spread knowledge, greatly appreciated!
I absolutely love the scientific approach of your videos. Out of all the knife sharpening channels out there, you're the one I always come back to, and the one I'll recommend without hesitation to friends looking for some tips/info. Understanding the process really helps. Your microscope shots are 100% worth it. Thank for the incredible work!
Oh my gosh, thank you for this video!! This level of detail is exactly what I needed to really understand why my old man would sharpen a wood chisel once a week, and I have to do it every 30 minutes
Love how you show microscopic views of the cutting edge. I catch on way faster when I can actually see the enlarged cutting edge. For some reason, it makes it easier for me to make the connection with verbal instructions, and I'm progressing quickly. 👍
I was just typing to comment on how these are your best photos ever on edges, burrs etc ( while still listening to you final words) and heard you mention how long it took, effort you put in. Clearly that effort showed today in what I think is one of your best videos on sharpening. I honestly don't think you could do any better at explaining and visualising. Amazing. thanks so much
nice job!! I sharpened every knife in the fish house for around 10 years, millions of fish processed yearly. If you're short on leather for a strop, cardboard boxes work really well. Stacks of boxes for packing frozen fish, strop them right on the stack. Works really well. Can't say I'd strop everyone's knives but mine sure got it. Huge difference. Never looked with a loop but you can tell by feel if you're even slightly competent. Again, great video!
This has been an enlightening video,I’ve always wondered why my knives would seem to be extremely sharp after sharpening,then quickly dull.You’re the man,man. Thanks for all your efforts.
@@gigel99324 Oof, I can see that happening. Personally I think I've pissed off a chef at my culinary institute, I turned his gyoza class into 15 students asking for me to sharpen their knifes... its addicting to sharpen knifes and see people using them for the first time and realize they cannot go back to a dull knife 😂😂😂
I picked up one of the lighted "card" magnifiers you used in this. Great advice. I was finally able to see exactly what was going on in a trouble spot I'd had on an M390 edge without needing to reprofile the entire edge, and fix it. 60x was the minimum magnification that let me find it. My old 20x loupe was no help. Thanks for the advice!
I absolutely love your vids. They improved my sharpening skills so much and i recognized the mistakes i was making,such as apex stability and burr removal,as you just shown. Thanks and keep up the good work .
Thank you so much. My dad showed me how to make a knife sharp 60 years ago and I have been doing it for that long but this video taught me a lot about what have been doing and what I could do better.
This particular video has helped me a lot. Alternating single light passes to gently eventually bend-break the burr - I finally get it! After stropping on leather the blade is oddly (unnaturally?) smooth when I rub my finger from the dull side and past the apex. But then I carefully test the edge in the cutting direction and it's quite sharp! Maybe after months of trying I've finally sharpened a blade properly! !!!
This video really helped me focus on the burr removal process - I was not giving it enough fine attention and now that I am my sharpening is noticeably better! Thank you!
It's great to see a technical explanation that I learnt intuitively over many years of sharpening chisels. That reducing pressure came naturally and is really effective..
I'm so grateful to have found your channel! No ridiculous prices for blocks, keeping it real. Going to buy that strop and diamond block to replace my old stuff. Never knew that removing burr was dragging the knife on the block towards the blade, whenever I did that on my cheap blocks I would start cutting them!
From a physics standpoint, this makes perfect sense. This also explains why my last few passes always have to be really lit. I didn't really know why that made a nice sharp endge but I could tell from feel and experience that it worked. It is so nice to understand why now! Thank you for a really helpful fun and USEFUL video!
I watched your video. I wasn't exactly surprised, but it didn't come as a shock either. Sharpening knives is indeed a very delicate and complex job. It's great that you're sharing such videos-they are very informative for people working in this field.
This explains so much why, when I sharpen my (cheap) knife with a pull-through style sharpener it can actually feel kind of sharp initially, but feels dull after only a couple of uses if you're chopping something a little harder. You can actually see the burrs with the naked eye and the edge is just rough as anything tbh, so I think a lot of any initial sharpness is just burrs.
When going through ~ 300-600-1000 grit, would you do "reducing pressure" technique just on the final 1000 stone, or would you bother to weaken the burr on every lower grit stone before switch to a higher grit? Thanks.
Am interested in his answer in this. I personally do alternating passes before going to the next finer grit when i use waterstones, but less so when i use diamond stones. I also tend to wipe the blade off before going to the next finer grit (no matter the sharpening utensil) to avoid cross contamination and to not bring useless metal debris onto the next stone. (even the diamond particles are only glued on and can come loose under too much pressure or over time. At least that's what spyderco writes in their manual for their diamond and bcn things ;-) )
Also wondering, the video and explanation makes perfect sense but would moving on to finer grid stones not have the same effect as reverse sharpening on the courser grit or would it be recommended to follow this on every grit?
Yeah, work your way throu the grits and deburr on the final grit. The burr will get smaller and smaerr the finer the grit. So only on the last stone is it necessary.👍
Best tip i heard is "Make the knife the sharpest it can be on each stone, don't rely on the next stone to fix it" Its probably not necessary to completely deburr and refine the edge on each stone, but a few passes to make sure youre even and the next stone doesnt have extra work to do are always a good idea.
This is a life skill. This is some thing everybody should watch a video on, easy to remember, but vital if you need it. You did a wonderful, I mean, a wonderful job, breaking it down. Thank you so much!
I watched your video. I wasn't exactly surprised, but it didn’t come as a shock. I’m very familiar with various metalworking methods, but knives are a particularly delicate subject since many people don’t understand the intricacies of knife sharpening and the durability of cutting edges. Sharpening knives is, indeed, a very meticulous and challenging task. It’s also great that you’re sharing such videos-they are very informative for those working in this field.
Your passion and dedication to produce this high quality educational videos is rare. Thank you so much for sharing your knowledge and experience. Sharp knives are more controlable, safer and much more efficient under responsible hands. This vid in particular synthesizes (IMO) over 85% of what has to be done to produce a clean edge and a very sharp knife for most people every time one sharpens, with minimum tools. 😎💥👏👏👏
WELL DONE MY DAD WAS A MASTER MACHINE BUILDER FOR MOORE TOOL IN CT AND PROVED MANY PROBLEMS WITH GRINDING "AT THAT TIME " AND POWER TRANSMISSION USING A MICROSCOPE AND A STROBOTACH VISUAL SPEED INDICATOR
Wow!!! My first time coming across your channel. Mind is blown!! I’m a professional sharpener in NC, at least I thought I was until I saw this video 😂 Keep the content coming man! This is amazing work!!!
Hi, I have been sharping knives and axes for over 50 years now and fully agree with the vast majority of videos. However you can get rid of most of a burr using wood if you know how. I would only use this method when out at camp or in the woods. I always carry a 800 grit stone in my pack as I have found it to be the best as a balance between reasonably being able to produce a good edge but also being able to grind out a damaged or chipped edge. To get rid of the burr with wood what you are going to do is to bend the burr right over so that it lays flat against the sharpened edge. You do this by drawing the edge across the grain of the wood several times. However you mustn't do this at 90° to the wood. So say your edge is about 20° draw the knife over the wood at 20° a couple of times with light pressure ( note you are only trying to bend the burr not the apex. Then up your angle to 30° and do the same. Then go back to 20° but this time as drawing it across the grain pull the apex into the wood as well. This leaves the knife with all of the burr laying from the apex down the sharpened edge. Then go back to the stone at and make two or three very light passes on the burr side only. I would love you to try this out and then show how effective it is under your microscope. I know that it's not as good as stropping but from experience I know it's not far off. It certainly keeps an edge a lot longer than not doing it and the bonus is it only takes a few seconds. Many thanks for your channel anyway and keep up the good work.
I just discover your channel, wanting to squeeze more life out of my chef knives. I am amazed about the quality of production. Complements to you. Liked and subscribed.
Hey.....just stumbled upon your channel and and I LOVE IT!! My ADHD has me on a quest for the sharpest apex I can achieve on my cutlery and you REALLY did a fantastic in-depth vid on how to achieve just that! Thanks man......I subscribed and I'm looking forward to more in depth knife info. Thanks.......and Merry Christmas!😊
Since I follow your tips my pocket and kitchen knives are much sharper for much longer. Well, I still struggle with the really small pocketknives with a drop point blade, but I'll get the hang of it eventually. Thank you very much for your hard work and pristine presentation.
Thank you!!!! All the work and information is appreciated. You have raised my sharpening game completely. Almost to hair whittling. But I have cheap knives. So it may just not be an option with cheaper steals. Which you have discussed in the past. Saving up for better steel soon!!!!
I really like your videos, thanks. I usually remove the burr on paper, newspaper works best. I use light back strokes and just bend the burr back and for until it bends off, which usually happens pretty fast. I just use paper cut method to test if burr is gone.
This was very helpful. I’ve had a hard time moving past a certain level of sharp where it will pop hair off but not cut paper towel or pop hairs off like I’ve seen some other edges do. I don’t think I’ve been doing proper burr removal and thank you for the better explanation and demonstration of your burr removal process on the stone
I used to be all about stropping with 6 or 9um diamond emulsion after a sub 1000 grit stone, but I was showed just fast that can polish the bite out of your working edge. I took his advice and have been stropping with no coarser than 1um diamond emulsion after a J400 or 800 stone finish, then a quick 0.5 or 0.25/0.1um strop to finish and it's a world of difference. Next level scary scary sharp instead of just scary sharp. A quality 1um diamond emulsion is MORE than enough to complete deburring after a coarse stone if you properly deburred on that last stone. That said, I really liked how you only did a few passes with the 6um strop to complete deburring. That's something I could get behind and have had success with, since it's unlikely to polish the tooth out. I think the issue is when people do a lot of passes. A few passes with 6um, then a few with 0.5 or finer and it's insane. Anyway, thx for the video.
That makes me really wonder what one should do to keep it sharp yet achieve mirror polish. I like to finish my knives sometimes to an impressive mirror polished edge. But as you say, often it feels a bit over stropped, perhaps the edge rounds too much and dulls faster. The fact that clean mirrored edges have no bite is clear but when it also loses its push cut ability faster, its entirely pointless and becomes less useful as a whole.
Bite is just the remains of burrs chipping away, causing a jagged edge. No burrs = no bite, technically. But yeah, many like the micro serrations. Stropping badly can go from reinforcing the apex and making it keener but overdoing can make it full faster from a more obtuse apex, or even worse you've simply dulled it by rounding the apex over.@@magicshon
@@mikafoxx2717 Ive found that over stropping is an issue only when you use bad technique or your strop is too soft. The point of stropping is not only deburring but also make the apex as small as possible so a good angle good polishing compound with no contamination of large grit and a relatively hard and flat strop is key for maximum sharpness.
Can you sharpen a knife from the start, the start being usage dullness, to decent sharp only doing alternating pases on a let's say 600-800 grit, then a light strop?
i thank you, kind sir, for taking the time to share your knife sharpening wisdom with us. also, i appreciate and am grateful for the effort you put into creating such a well put together educational video with such great visual aids. 🙏🏽 many thanks.
Great job, thank you! Preasure is turned out to the key to true sharpening. Other “masters” of sharpening including japaness micro grid gurus are only thinning the bur instead of getting rid of it. You are a real scientist 👍👍👍
An excellent presentation of knife sharpening. Thank you very much for sharing your knowledge with us. I have benefited greatly from your hard work. Thanks again.
So with a properly deburred edge on a kitchen knife, how long should the edge typically stay clean? And what's the best way to 'touch up' the edge? Back to a fine stone then strop? Keep up the great content!
For touch ups, I just strop, it works to a certain degree. If it doesn't work anymore, fine stone and strop again. Wenn the edge is dull, you have to sharpen through the whole process again. The trick is to keep the knife sharp with stropping, so never let it go too dull, otherwise you have to sharpen too often and to remove more material over time than necessary.
A fine presentation on the subject, and articulated in a manner for effective technical comprehension. It was worth the care and effort and i do appreciate the numerous relevant photos with explanations. Thank you.
The $20 Stone In this video is back in stock➡ amzn.to/3KeXXF1
Review here➡ruclips.net/video/06OW8ahqZDg/видео.html
Jeweler’s Loupe ➡amzn.to/3Kgx9E9
Purchased with my own money but⬇
Amazon affiliate link.
As an Amazon associate I earn from qualifying purchases.
I currently dont own any serrated blades 🙂
@@OUTDOORS55do you have a specific loupe rec?
Amazing content and photography, you should compile/author a book utilizing all your photos on the subject of sharpening.
Speaking of books, can you recommend any books on this subject (maybe some new video content on recommended reading).
Your content and presentation format are fantastic, thank you Sir.
You are making the world a better place, one edge at a time. My Sypderco Military's CMP S30V blade is wicked sharp thanks to you. 👍
Could you please recommend a good diamond paste. If you provide an Amazon link I'll order some.
I've had great success using the stones you recommend, now I need a good diamond stropping paste. Its difficult searching through Amazon as many of the pastes are in a spray form, I'd rather use a paste in a syringe.
I've looked all over for a quality jeweler's loup that's 90x magnification. Can't find one , HELP!
The epitome of the saying “don’t just tell me, show me”. Best knife channel currently on youtube? Strong chance!
Wow thanks Pete! Your channel was a big inspiration for me when I first started, and still is. Thanks for the continued inspiration and support👊👊
I love watching both of you guys as well as Jared’s channel!
Modern day myth busters lol, I feel as if you may be getting close to breaking the internet with these space age thoughts 🤣 thanks for showing and the time invested it is greatly appreciated 👍
Spider-Man pointing at each other meme 😯👉 love to see it
first time seeing both of your channels. instant sub to both! looking forward to some great content from you guys
Hands down the most detailed information on sharpening on RUclips. We appreciate your work.
not really, go look how they "sharpen" swords in the medieval days
ABSOLUTELY!
@@anamegoesherecould you please share a video from that time?
@@simonjonsson3654 sure when you show a video of a knight cutting off a dragons head and it's not from a hollywood movie or AI
Agreed. I feel like I actually know what's happening when I try to sharpen something now.
I was so full of myself to think that I can feel any burr with my finger or see it with naked eye by turning the knife a bit and catching the reflection of light from the edge. But I took a knife that had no burr (I was absolutely certain) and looked at it through jewelers loupe and surprise-surprise super small burr was still there!
Few more alternating passes on extra fine DMT with pressure less than the knife weight and then 1 micron diamond strop and I got my first ever hair whittling edge! First time after 2 years being into knife sharpening. Cant believe that what I was missing is simply using as little pressure as possible at the end. And I WAS reducing pressure, I just didnt realize how little pressure I actually needed.
Big thanks for your contributions to the knife community. Your videos are the best.
I wear my lighted dental loupes when sharpening. When stropping, I can feel the burr"scratching" the leather. When the scratching stops, the burr is usually gone. I have to watch your videos twice. Once to gawk at the incredible magnification views. Once to actually listen to what you are saying. THANK YOU, Alex!!
Can we see which dental loupe you're using? I'm in the market for one at the moment so I'm curious about people's experience of them.
There can still be a micro burr after the scratching stops. Extremely small burrs that are straight (not favoring one side) can go by undetected with this method. Observe the apex closely (rotating the blade and observing light reflection), constantly feel the apex and get used to the feedback on your thumb pad, as to how a burr versus a burrless apex feels, observantly feel how it cuts through paper, glide the apex across your thumbnail and check for resistance, etc. all good methods, especially when combined, at finding the smallest and peskiest of burrs. And your loupe is a big help.
@@twatmunro Orascoptic XV1. IIRC, it was about $2500 when I bought it about 12-15 years ago. I'm not sure it is still available.
@@oceanwaves83 Initially I use my thumb pad to feel for the burr, then I look at the apex for any light reflections. When I get rid of those I then run the end of my thumb nail gently along the edge; this picks up any straight burrs that are usually removed with gentle stropping. I have just ordered a 60/90 magnifier as used by Alex in this video; I'm hoping I can step things up a level.
@@tyrotrainer765the reflection is super useful to determine if you missed a spot sharpening
Hello from Ireland. Just wanted to say thanks for all your efforts and teaching! I had tried a few times in my life to get good at sharpening and sucked at it, but your videos helped me to learn how to get an edge using the crap stones I had and after a while I got some diamond stones and made a strop and it's made a huge difference. It's a life skill I'd always wanted even though I'll only really use it for my family/friends kitchen knifes. It's nice to be able to have a few good steel knifes and not need to bin/live with crap knifes. Thanks again, I'll send whoever is interested your channel's way. Hope you go from strength to strength.
Wow thanks so much! Glad to hear you are getting good results. Thanks again really appreciate it🙏🙏
Alex, would love to see a “closeup” video of what’s happening to the edge during common mistakes (varying sharpening angles, over angles stropping, over aggressive pressure, failed apex’s, etc).
Great idea
Yes, please show me what my knife looks like.
Yes! Show what good versus bad jobs look like! I live that they showed the pull thru sharpener's horrible apex.
It doesn’t get any better or clearer than this…a strop with the proper compound is your best friend when sharpening! Outrageously good photography..next level! Seeing is believing..Thanks Alex ..awesome video MikeR. 🇨🇦
I kind of feel like on in a class when watching your videos.
I fully understand this particular video. I once had this exact problem until rather recently. Your videos guided me to really recognize the burr and work properly to remove it.
I still haven’t gotten to Hair whittling yet. More practice…
Just received and unboxed my knife sharpening kit.
I was inspired by you and I know that all of your great videos will help keep my kitchen knives in top form.
All the best.
Cheers.
@@general-cromwell6639 thanks so much! Really appreciate the support 🙏🙏🙏
I really applaud your efforts in photogrammetry. The results are fantastic.
I've been watching sharpening content for a long time, but this is the first video that explicitly showed burr removal. Also discussing the relationship between the last stone used and the stopping compound chosen is very helpful.
A cheap little 50x-1000x digital USB microscope for $25 was such a great tool for helping me understand my sharpening results. It really helped me get a feel for how much pressure to use as well as how burrs actually worked and the differences between diamond stones and whetstones and fine grit vs coarse grit. It taught me so much about how tricky burs can be with their false edges. Your channel and advice is spot on; I have also come to the same conclusion that diamond stones are the way to go rather than whetstones, and I also prefer getting a refined apex on a coarser stone. I too have experimented my way into preferring the method of apexing on a coarse stone, and then alternating edge-leading passes with lighter and lighter pressure. However, one last thing that I do to minimize the burr before the strop is I skip from my 300-grit diamond stone to an 8,000-grit diamond stone and do very light pressure alternating passes as well. I find this helps me maintain the geometry a little better than the strop. However, I am definitely not practiced enough to do any of this freehand like you, so I am doing this with a sharpening system that lets me get incredibly consistent customized angles, but still all of the pressure and movements are by hand.
Diamond stones ARE whetstones, so talking about the differences between them, is like talking about the differences between poodles and dogs.
Some diamond stones have contamination by few coarse crystalls. DMT 600grit that I use unfortunately have I guess around 20 bigger individual "dents" that tend to ruine surface, in fact, making it worse than prevous step 320 grit. I can clearly hear clicks and feel stops when trying that 600 grit. I tought they will split with time but in reality they strong as new even after many attempts. Maybe I will try to eliminate them one by one making 2d map and burn by sun light with magnifying glass or scratch it other way, no idea how. It is definitely nice idea to use nickel/steel diamond stone at low grit and go for resin embedded for finer. So, I fear to buy 1200 or 8000 DMT because of contamination risk. Not big deal really, 220+340 actually already so nice, easy to use.
What’s the system that lets you get perfect angles? :)
@@matthewdale2212 I use a setup like the wasabi sharpeners with an upgraded metal bearing, and the DMT aligner-style stones, and I just use my iPhone level to get the angle. I have found that with proper geometry management, those systems can work well, and it realistically costs easily less than $50 to get everything you need.
First I find the exact center of distance between the knife tip and heel and mark with fine point marker. Then I align it on the clamp (on which I also draw a center line) and then I make sure the knife edge centermost to the clamp is at an exact 90º angle from that centerline at the center point. I do not recommend doing any of this by eye, as I have found that the larger area of the heel and the narrower area of the tip can be extremely misleading to the eye (I find my brain likes to gravitate towards center of mass instead of center of length). Then I dial in the fulcrum screws on the clamp to make sure that the knife angle is virtually identical from both orientations of the clamp. Once I have established this, I set my alignment height for the sharpening rod at exactly 15º from the center point of the knife edge. I do this for consistency so I am not accidentally sharpening and different angles when sharpening the same knife months later, and it lets me get consistent apexing in subsequent sharpenings. I just zero out my phone's level against the level portion of the clamp base, and then measure the 15º right on top of the stone clamp as it rests on the knife edge, so I know my angle is extremely accurate and representative. I also screw in some stops below and behind the alignment screws for the height adjuster so that the angle can't accidentally change during the length of the sharpening. This way I can switch out stones without having to reset my angle.
It sounds fussy, and it probably is, but I personally do not think hobbyists like me have the skill to freehand consistent angles without doing it almost daily like a professional, and I am happy to spend an extra 10 minutes setting up my sharpening system if it means that I can save loads on "professional" sharpening costs. I'd rather not ruin hundreds or thousands of dollars of knives because I wanted to be hardcore and oldskool. Plus, I also have the mental benefit of being able to use my kitchen knives with "reckless abandon" without those intrusive thoughts in my head warning me that I need to try to stretch out my time between sharpening. I don't want to be buried in fear while I'm using the things that are supposed to bring me joy and love, so being able to find a simple and dependable solution to keeping my knives sharp is absolutely worth the additional mental benefits on top of the financial ones. Plus, even an avid home cook probably only needs to sharpen their utility knives like 3 times a year at most, so I'm happy to spend an extra few minutes a year accomplishing this. And my other "non-daily" knives like boning/paring/filet probably only need sharpening like once a year, if even that.
Jeezus, you've done all the studies!!! 😯😊🥰@@AABB-px8lc
I know why my freshly sharpened knife gets blunt quickly. Because my wife keeps using it to cut the kids fruit and sandwiches on ceramic plates every morning. 😭
Cuz your balls are in her purse
It is strongly suggested to buy a microscope and a diamond to keep fixing that burr
Grounds for divorce that mate.
Did she also run it through the dishwasher where the steel was made more mild?
Stopped reading after kids...
Was shocked.
Thank you! Very high quality shots and pictures and very well explained! Keep it coming :)
Thanks for the support my friend 🙏🙏
OMFG. I think you just changed my life. I've hand sharpened and carried a pocket knife for about 30 years. I can always get mine very sharp, but I feel like they dull quickly, I always thought, well I sharpen too a fairly shallow angle guess that's to be expected. I tried this and I think I 100% have been just folding my burr. Thank you thank you!
He didn't changed anything. Knife with burr is sharper than knife without. And when the burr get to a side it disapeers quite quickly when you continue to cut and at that point the knife gets sharper again.
Usually good knife never get dull if you use it correctly. It gets sharper and sharper when you cut.
This is an exemplary way to explain what burrs are and why it's so important to remove them. Bravo! Your macro photography really brings the point home.
I like to think I know how to sharpen a piece of steel. But this, this was a GREAT deep dive on the topic. You really laid out how the process progresses. We'll done.
Awesome job 👏🎉
Thanks so much 🙏🙏🙏
Simply masterful. This stands so far above similar channels with its rigourous scientific approach, intelligence, clarity of explanation and quality of presentation. So many other channels suffer from long-winded, unclear, over-excited presentations and this one is a breath of fresh air. I come from a scientific and educational background and this is outstanding. Thank you.
The best knife channel out there. Why? Simple. Instead of just talking, we get hard data in pictures. There's nothing subjective here.
Alex, this is your best video since "ceramic knives sharpening" masterpiece!
Master class in knife sharpening, making my decision easier to buy a stone and begin my knife sharpening journey. Thank you for all the work you do to spread knowledge, greatly appreciated!
I absolutely love the scientific approach of your videos. Out of all the knife sharpening channels out there, you're the one I always come back to, and the one I'll recommend without hesitation to friends looking for some tips/info. Understanding the process really helps. Your microscope shots are 100% worth it. Thank for the incredible work!
Hands down the most helpful series of sharpening videos I've found on the internet. Thank you.
This video should be mentioned or linked in every knife purchases. Incredible amount of informations here
Thanks
Wow thanks my friend! I really appreciate it 🙏🙏👊
Oh my gosh, thank you for this video!! This level of detail is exactly what I needed to really understand why my old man would sharpen a wood chisel once a week, and I have to do it every 30 minutes
Bedankt
Thanks so much! Really appreciate it🙏🙏
Love how you show microscopic views of the cutting edge. I catch on way faster when I can actually see the enlarged cutting edge. For some reason, it makes it easier for me to make the connection with verbal instructions, and I'm progressing quickly. 👍
Thanks!
Thanks so much! Your support is definitely appreciated🙏🙏🙏
I was just typing to comment on how these are your best photos ever on edges, burrs etc ( while still listening to you final words) and heard you mention how long it took, effort you put in. Clearly that effort showed today in what I think is one of your best videos on sharpening. I honestly don't think you could do any better at explaining and visualising. Amazing. thanks so much
I’ve been a frustrated knife sharpener for ages. I think you may have just enlightened me with what my problem has been all along. 10/10
nice job!! I sharpened every knife in the fish house for around 10 years, millions of fish processed yearly. If you're short on leather for a strop, cardboard boxes work really well. Stacks of boxes for packing frozen fish, strop them right on the stack. Works really well. Can't say I'd strop everyone's knives but mine sure got it. Huge difference. Never looked with a loop but you can tell by feel if you're even slightly competent. Again, great video!
This has been an enlightening video,I’ve always wondered why my knives would seem to be extremely sharp after sharpening,then quickly dull.You’re the man,man.
Thanks for all your efforts.
You microscopy is astonishing and very insightful.
Im surprised at how many knife sharpening videos I have watched without getting bored and I'm not intending to stop anytime soon. Great job!
Amazing video with great insights into the intricacies of burrs. With your work as a resource, beginners have no excuse to complain.
I was just about to go to bed... oh well, how bad could be 20 minutes + probably resharpening all my knifes?
The problem is I can't stop playing with them after sharpening, I eat a ton of fruit just to get to cut it
@@gigel99324 Oof, I can see that happening. Personally I think I've pissed off a chef at my culinary institute, I turned his gyoza class into 15 students asking for me to sharpen their knifes... its addicting to sharpen knifes and see people using them for the first time and realize they cannot go back to a dull knife 😂😂😂
@@gigel99324 i eat my victims
18:11 I appreciate the work for those shots, lots of time is needed to take and combined those shots.
the microscope pictures add a lot of value and really help the information stick, great video :)
I picked up one of the lighted "card" magnifiers you used in this. Great advice. I was finally able to see exactly what was going on in a trouble spot I'd had on an M390 edge without needing to reprofile the entire edge, and fix it. 60x was the minimum magnification that let me find it. My old 20x loupe was no help.
Thanks for the advice!
I absolutely love your vids. They improved my sharpening skills so much and i recognized the mistakes i was making,such as apex stability and burr removal,as you just shown. Thanks and keep up the good work .
Outstanding vid! Burr removal has always been problematic for me. Your solution is brilliant.
This channel is amazing. Actually taking a really good, close look at sharpening and how/why things happen is rare these days. I love this.
Thank you so much. My dad showed me how to make a knife sharp 60 years ago and I have been doing it for that long but this video taught me a lot about what have been doing and what I could do better.
This particular video has helped me a lot. Alternating single light passes to gently eventually bend-break the burr - I finally get it! After stropping on leather the blade is oddly (unnaturally?) smooth when I rub my finger from the dull side and past the apex. But then I carefully test the edge in the cutting direction and it's quite sharp! Maybe after months of trying I've finally sharpened a blade properly! !!!
Tak!
WOW thanks so much for your support!🙏🙏🙏
Best and clearest explanation of the effect of a burr I've ever seen. The pictures are great! So helpful.
This video really helped me focus on the burr removal process - I was not giving it enough fine attention and now that I am my sharpening is noticeably better! Thank you!
Love me someone who explains the why's and not just the how's. Stellar work, I learned a lot.
The best, knife sharpening and burr removal video on the internet period.
As always fantastic content on this channel.
Just became a butcher and man did this help, thank you 🙏🏼
It's great to see a technical explanation that I learnt intuitively over many years of sharpening chisels. That reducing pressure came naturally and is really effective..
This video has honestly helped me a lot, I've achived razor shapness for the first time on a few kitchen knifes. Thank you!
I'm so grateful to have found your channel! No ridiculous prices for blocks, keeping it real. Going to buy that strop and diamond block to replace my old stuff. Never knew that removing burr was dragging the knife on the block towards the blade, whenever I did that on my cheap blocks I would start cutting them!
From a physics standpoint, this makes perfect sense. This also explains why my last few passes always have to be really lit. I didn't really know why that made a nice sharp endge but I could tell from feel and experience that it worked. It is so nice to understand why now! Thank you for a really helpful fun and USEFUL video!
That’s a real step up in clarity of description and messaging around instruction. well played!!
Your camera work is FANTASTIC. thank you very much for your content.
I watched your video. I wasn't exactly surprised, but it didn't come as a shock either. Sharpening knives is indeed a very delicate and complex job. It's great that you're sharing such videos-they are very informative for people working in this field.
This explains so much why, when I sharpen my (cheap) knife with a pull-through style sharpener it can actually feel kind of sharp initially, but feels dull after only a couple of uses if you're chopping something a little harder. You can actually see the burrs with the naked eye and the edge is just rough as anything tbh, so I think a lot of any initial sharpness is just burrs.
When going through ~ 300-600-1000 grit, would you do "reducing pressure" technique just on the final 1000 stone, or would you bother to weaken the burr on every lower grit stone before switch to a higher grit? Thanks.
Am interested in his answer in this.
I personally do alternating passes before going to the next finer grit when i use waterstones, but less so when i use diamond stones.
I also tend to wipe the blade off before going to the next finer grit (no matter the sharpening utensil) to avoid cross contamination and to not bring useless metal debris onto the next stone.
(even the diamond particles are only glued on and can come loose under too much pressure or over time. At least that's what spyderco writes in their manual for their diamond and bcn things ;-) )
Also wondering, the video and explanation makes perfect sense but would moving on to finer grid stones not have the same effect as reverse sharpening on the courser grit or would it be recommended to follow this on every grit?
Yeah, work your way throu the grits and deburr on the final grit. The burr will get smaller and smaerr the finer the grit. So only on the last stone is it necessary.👍
Best tip i heard is "Make the knife the sharpest it can be on each stone, don't rely on the next stone to fix it"
Its probably not necessary to completely deburr and refine the edge on each stone, but a few passes to make sure youre even and the next stone doesnt have extra work to do are always a good idea.
This is a life skill. This is some thing everybody should watch a video on, easy to remember, but vital if you need it. You did a wonderful, I mean, a wonderful job, breaking it down. Thank you so much!
Every video you put out helps. Slowly getting my sharpening game up to par. Thank you!
This is a great video. I’ve come back to and watched it a few times. Thanks for taking the time to put it together and posting.
Such a great communicator. I wish other knife sharpening channels would do as well as you do. Love the lessons!
I just learned a lot. Man was it frustrating to sharpen a knife only to have it dull easily the next time that I use it. Thank you.
I watched your video. I wasn't exactly surprised, but it didn’t come as a shock. I’m very familiar with various metalworking methods, but knives are a particularly delicate subject since many people don’t understand the intricacies of knife sharpening and the durability of cutting edges. Sharpening knives is, indeed, a very meticulous and challenging task. It’s also great that you’re sharing such videos-they are very informative for those working in this field.
I’m struggling to sharpen curved blades. Any advice?
And serrated! No idea how you sharpen serrated kitchen knives. 🤷🏻♂️
Your passion and dedication to produce this high quality educational videos is rare.
Thank you so much for sharing your knowledge and experience.
Sharp knives are more controlable, safer and much more efficient under responsible hands.
This vid in particular synthesizes (IMO) over 85% of what has to be done to produce a clean edge and a very sharp knife for most people every time one sharpens, with minimum tools. 😎💥👏👏👏
I must say I greatly admire the detail and the proof that you present about your word. We can see it happen as you say it.
WELL DONE MY DAD WAS A MASTER MACHINE BUILDER FOR MOORE TOOL IN CT AND PROVED MANY PROBLEMS WITH GRINDING "AT THAT TIME " AND POWER TRANSMISSION USING A MICROSCOPE AND A STROBOTACH VISUAL SPEED INDICATOR
Thanks man, I think I learned enough in this 1 video than I have watching hour of others.
Alex...you give a truly master-class presentation with each video! Well done!!
Wow!!! My first time coming across your channel. Mind is blown!! I’m a professional sharpener in NC, at least I thought I was until I saw this video 😂
Keep the content coming man! This is amazing work!!!
Hi, I have been sharping knives and axes for over 50 years now and fully agree with the vast majority of videos. However you can get rid of most of a burr using wood if you know how. I would only use this method when out at camp or in the woods. I always carry a 800 grit stone in my pack as I have found it to be the best as a balance between reasonably being able to produce a good edge but also being able to grind out a damaged or chipped edge. To get rid of the burr with wood what you are going to do is to bend the burr right over so that it lays flat against the sharpened edge. You do this by drawing the edge across the grain of the wood several times. However you mustn't do this at 90° to the wood. So say your edge is about 20° draw the knife over the wood at 20° a couple of times with light pressure ( note you are only trying to bend the burr not the apex. Then up your angle to 30° and do the same. Then go back to 20° but this time as drawing it across the grain pull the apex into the wood as well. This leaves the knife with all of the burr laying from the apex down the sharpened edge. Then go back to the stone at and make two or three very light passes on the burr side only. I would love you to try this out and then show how effective it is under your microscope. I know that it's not as good as stropping but from experience I know it's not far off. It certainly keeps an edge a lot longer than not doing it and the bonus is it only takes a few seconds.
Many thanks for your channel anyway and keep up the good work.
We're gonna have to call you the Burrman giving us quality video and content on this subject.
This is so helpful. As many times as I've watched your older videos, you describe it even further. This is great thank you.
I just discover your channel, wanting to squeeze more life out of my chef knives. I am amazed about the quality of production. Complements to you. Liked and subscribed.
Hey.....just stumbled upon your channel and and I LOVE IT!!
My ADHD has me on a quest for the sharpest apex I can achieve on my cutlery and you REALLY did a fantastic in-depth vid on how to achieve just that!
Thanks man......I subscribed and I'm looking forward to more in depth knife info.
Thanks.......and Merry Christmas!😊
Since I follow your tips my pocket and kitchen knives are much sharper for much longer. Well, I still struggle with the really small pocketknives with a drop point blade, but I'll get the hang of it eventually. Thank you very much for your hard work and pristine presentation.
My guy just made the best explaining content ever on youtube
Thank you!!!! All the work and information is appreciated. You have raised my sharpening game completely. Almost to hair whittling. But I have cheap knives. So it may just not be an option with cheaper steals. Which you have discussed in the past. Saving up for better steel soon!!!!
can you use a ceramic steel to take edge off cheers
Thank you for posting such informative advice like this. You improve the world’s sharpening experiences.
I really like your videos, thanks. I usually remove the burr on paper, newspaper works best. I use light back strokes and just bend the burr back and for until it bends off, which usually happens pretty fast. I just use paper cut method to test if burr is gone.
Do you do the reduced or reducing pressure? I wasn’t clear what he meant
This was very helpful. I’ve had a hard time moving past a certain level of sharp where it will pop hair off but not cut paper towel or pop hairs off like I’ve seen some other edges do. I don’t think I’ve been doing proper burr removal and thank you for the better explanation and demonstration of your burr removal process on the stone
Wave at the beach-nicely chosen metaphor. Very grateful for your content. Extremely helpful.
You mentioned a great video idea at the end, Edge retention vs Edge or apex stability. Great video 👊
I used to be all about stropping with 6 or 9um diamond emulsion after a sub 1000 grit stone, but I was showed just fast that can polish the bite out of your working edge. I took his advice and have been stropping with no coarser than 1um diamond emulsion after a J400 or 800 stone finish, then a quick 0.5 or 0.25/0.1um strop to finish and it's a world of difference. Next level scary scary sharp instead of just scary sharp. A quality 1um diamond emulsion is MORE than enough to complete deburring after a coarse stone if you properly deburred on that last stone.
That said, I really liked how you only did a few passes with the 6um strop to complete deburring. That's something I could get behind and have had success with, since it's unlikely to polish the tooth out. I think the issue is when people do a lot of passes. A few passes with 6um, then a few with 0.5 or finer and it's insane. Anyway, thx for the video.
That makes me really wonder what one should do to keep it sharp yet achieve mirror polish. I like to finish my knives sometimes to an impressive mirror polished edge. But as you say, often it feels a bit over stropped, perhaps the edge rounds too much and dulls faster.
The fact that clean mirrored edges have no bite is clear but when it also loses its push cut ability faster, its entirely pointless and becomes less useful as a whole.
Bite is just the remains of burrs chipping away, causing a jagged edge. No burrs = no bite, technically. But yeah, many like the micro serrations. Stropping badly can go from reinforcing the apex and making it keener but overdoing can make it full faster from a more obtuse apex, or even worse you've simply dulled it by rounding the apex over.@@magicshon
@@mikafoxx2717 Ive found that over stropping is an issue only when you use bad technique or your strop is too soft. The point of stropping is not only deburring but also make the apex as small as possible so a good angle good polishing compound with no contamination of large grit and a relatively hard and flat strop is key for maximum sharpness.
A wonderful explanation of why and how to sharpen a blade.
Can you sharpen a knife from the start, the start being usage dullness, to decent sharp only doing alternating pases on a let's say 600-800 grit, then a light strop?
i thank you, kind sir, for taking the time to share your knife sharpening wisdom with us.
also, i appreciate and am grateful for the effort you put into creating such a well put together educational video with such great visual aids.
🙏🏽 many thanks.
such depth is really appreciated man great video best one on youtube on this certain subject👍
Great job, thank you! Preasure is turned out to the key to true sharpening. Other “masters” of sharpening including japaness micro grid gurus are only thinning the bur instead of getting rid of it. You are a real scientist 👍👍👍
An excellent presentation of knife sharpening. Thank you very much for sharing your knowledge with us. I have benefited greatly from your hard work. Thanks again.
So with a properly deburred edge on a kitchen knife, how long should the edge typically stay clean? And what's the best way to 'touch up' the edge? Back to a fine stone then strop?
Keep up the great content!
For touch ups, I just strop, it works to a certain degree. If it doesn't work anymore, fine stone and strop again. Wenn the edge is dull, you have to sharpen through the whole process again. The trick is to keep the knife sharp with stropping, so never let it go too dull, otherwise you have to sharpen too often and to remove more material over time than necessary.
Thank you, the video answered many questions about techniques. Appreciate your efforts.
The macro photography is absolutely insane. In future could we get a timelapse of paper being cut with the macro to simulate video??
A fine presentation on the subject, and articulated in a manner for effective technical comprehension.
It was worth the care and effort and i do appreciate the numerous relevant photos with explanations.
Thank you.