The Angelita Ranch cutting board/butcher block. CNC inlay. Making process.
HTML-код
- Опубликовано: 13 окт 2024
- How to find inlay parameters.
broinwood.com/...
“The Angelita Ranch a place where the memories that are made; along with the love you are shown is forever in your heart”
The board size is 24*18*3 inch. wood (walnut, maple)
broinwood.com/
If you want a custom board please email us broinwood@gmail.com
For orders go to broinwood.com/...
Check out our instagram page / broinwood
The outstanding design made by our teammate Bohdan,
check out his IG page @petrushko_bohdan
/ @bogdanpetrushko3425
/ boordon.design
boordon@gmail.com (if you need a custom illustration, please contact him)
Here some stuff which I use in my workshop and really love it. 👍👍👍
Maybe it will be useful for you.
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel, where you can see my woodworking: cutting boards with inlay from different types of wood, wood maps, key hangers and more. I often use CNC machine for my works, I love using it. I’m going to share my videos every week.
Thank you for visiting my channel. I appreciate your likes and subscriptions!
Sincerely,
Nik.
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
Another masterclass delivered. Thank you for sharing the experience with us.
The Wood Master at it again! Great job and another great masterpiece.
Incredibly beautiful work, as usual.
What does that BEAST of a cutting board weigh, and do you need a forklift to move it? 😄
It's great, now I know, I support your channel.
Damn, your blocks are getting bigger, thicker & heavier!! Is that now your biggest project by weight/volume? Looks brilliant though. Your dust shoe brush is almost as old & straggling as I am , Shapeoko do a nice transparent, polycarbonate one with magnetic fixing !!
Amazing cutting board. Did you know how to use a cnc machine before you started making cutting boards? Just wondering how difficult they are to learn to use for people with zero experience with them? I appreciate any info or wisdom you can share with someone who has only been making cutting boards for about 6 months. Thanks and again your boards are amazing. Looking forward to watching more of your video's.
How does anyone dislike this? Absolutely amazing work
Jesus, so many work but a realy realy great Job !!
May I ask how deep are pockets or how high are plugs. As average. Thx. Marek. Great job I am excited as always looking to your works.
Why don't you use a larger (2in+) surfacing bit for the initial leveling and surfacing? Seems like it could save a lot of time since it could do in one pass what your existing bit does in three or four passes.
HEY, did you make that wood press rack or did you buy it and if you bought it, where did you buy it from?
JLT clamp table
Outstanding work
Awesome! what kind of CNC machine used for this project?
Love those clamps. Any chance you have a video explaining how they work?
It’s a JLT clamp table
As all ways your your talent is amazing
Just monster boards !
Excelente trabalho, parabéns
Very nice job, but time to buy a surfacing bit to replace that 1/4" bit. Big time saver.
Отличная работа!👍
Are the vectors file yours or you get them somewhere?
How do you get the super fine points to not chip? Is it just that end grain tends to hold up so much better to 15 degree/30 v bits?
Very cool project
Базара нет! Круто.
Would you mind sharing your start depth and flat depth for the male plug ?
Just started using vcarve and I'd love to know the same, he has so much inlay depth.
You'll be better with each board, compliment ;-)
In Germany we say "Großes Kino".
Curious why you don't use a 1" surfacing bit?
Probably because they spin too slow.
@@stephanforseilles I don't believe there is anything that says you can't run a 1" surfacing bit at 20K. I sometimes do, no problem. Makes quick work leveling my cutting boards.
@@Warpfield I have one on order, I'll try that... :)
Good work...
Amazing
bonjour quelle jeux utiliser vous entre les deux pièce a emboiter pour que ca ne force pas trop
This turned out amazing, but my attention was stolen by a set of celtic knotwork sitting off tot he side in one shot that I would love to see more about.
Is this cutiingboard?
The bit you use for surfacing, is that 1/2" shank? I can't find anything that would cut as deep of a profile for 1/4"
Yes, it’s in the description
How thick is that original block, 6 inches?
Thank you for this...😍😍😍
Классная работа!
Mega mega mega, как всегда просто класс!!!!!
🔥🔥🔥Классная работа, Ник!👏👏👏
хорошая работа.супер
Gorgeous😍
Zanimljivo...
Hi fella when am I getting my video of my board please m8 also did you get my other email cheers fella cool vid again
Sensei.
What is wood?
Why not use a bigger flattening bit???
Wow
like it alot,thanks.
👍👏
Красотааа)
👍🏼👍🏼👍🏼👍🏼👍🏼
대박
By any chance u wanna share ur files?
That CNC file, just conversion your draw to cnc software
ну и как на сервах работается?
шаговики вроде, скорости не большие
@@olegs.2301 апгрейд был недавно. хотя тут наверное точность важнее а не скорость
@@mrSanders. о, не знал про апгрейд. Было видео?
@@olegs.2301 в инстаграм
@@mrSanders. спасибо, гляну
Nice work...
Your bit will thank you next time if you take the extra 45 seconds and scrape the excess glue off beforehand.