Sir: you are clear and to the point and after watching your video for 5 minutes, I knew that you were the person I was looking for to help a novice like me decide on choosing a CNC router and learning software. just brilliant, Thank you, very much, you need to get paid for your work.
Great video. I assembled an MPCNC eight months ago and have watched a ton of CNC videos to build my proficiency with my machine. This is by far the best introduction video I've seen on the subject. In watching all these videos I've noticed one area that is seldom covered that might fit with your channel: interesting beginner projects created by knowledgeable people focused on one specific area, and using inexpensive materials, common router bits, and that mill in a relatively short time. I've had to create these kinds of projects for myself to learn and would have loved projects where I could compare and contrast my results with someone knowledgeable. I look forward to your future videos.
Hi Robert. Thanks for the suggestions! I do plan on doing several beginner projects to showcase the various CAM features/workflows. I'll definitely keep in mind the 'standard' bits and things so people aren't expected to go buy several items for one project :)
Thank you. Finally a video for beginners that a beginner can actually understand. Every ither video for beginners assumes the beginner knows far more than a true beginner actually does. I simply want to draw tge panels to make a dovetail joined wooden box and then cut the pieces out if a sheet of plywood. Thats all I want to learn for now but cant seem to find any video to show a beginner how to do it.
Your definition of feed rate at 4:32 is likely to cause confusion. I am a machinist and when it comes to feed rate on a Mill it always referred to in either ipm (inched per minute) or mmps (millimeters per second) The machine interface will display this value while running. “Feed per rev“ is used on lathes where the tool rides on a carriage which is geared to the spindle. What counts is chip load, the amount each cutting tip (or flute) removes. On a lathe there is only one tooth so it is the same as feed per rev. On a mill the formula to find this is: Feed rate = rpm x number of flutes x chip load Common roughing chip load in steel is .008” on a mill. Many many variables to find a good chip load, rigidity of the machine being a huge factor.
This is true. Chip load has everything to do with getting the most life out of your cutting tool. What is seldom mentioned including this video is that the hobby machines are no way capable of running high enough feed rates or being built good enough( spelled rigidity) for a good chip load. Your tools will die a short life due to the heat.
You're not wrong, but the point was to get beginners into things without being overwhelmed. It's pretty highly likely a hobbyist isn't going to need to know how to calculate speeds and feeds. Chances are if they're machining some heavy duty materials they likely know what they're doing.
Have a good day Kevin Kennedy, I started learning solidworks to model 3d parts but as you know it was very complex as a beginner, but one day I found your youtube channel and saw that you have the tutorials for learning "Fusion 360 in 30 days" and as soon as I saw your first video, I was amazed by the very goog explanation and the part by part teaching, and because of that, I followed the videos and finished all that series, and now thanks to you, I can design all that I want to or need to and 3d print it and it is great!. Now I bought the 3018 chinese CNC and at the moment I´m using vectric aspire with it, but I think that it will be perfect to learn from you how to CNC directly from Fusion 360 as it looks something intimidating, so, please continue with this project it will be great something like a "Learn CNC in 30 days" or so and THANK YOU VERY MUCH for all the time and effort that you take to make this channel possible, not only for me but for all of us who watch your channel, you are a great great guy! Atte. Jorge
Very good video. I used youtube videos to learn how to operate a hobby level "WorkBee" CNC machine 3 years ago. I use Photoshop to design and VCarve to trace my lines and create G-code. The company I now do work for uses two of these entry level machines in their workshop. We use them to both personalise and more importantly speed up part of the manufacture process of high quality wooden garden gates which are sold online. For me it has become a full time job and just love doing this work.
Very informative! I’m considering an education in cnc carpentry, but got sort of scared off thinking it was super complicated. Thank you for simplifying it :)
Excellent Video. Nothing like an Overall Conceptual View of what Basics you are going to learn,,, BEFORE Diving into all of them... I can tell that you have taught, and others have asked questions, and you paid attention to the "Why" they asked them.. Very, very good job on an Intro to CNC of any type.. Thank You! You filled in a lot of gaps that should have never been there to begin with... Outstanding.. If your Courses are anything like this Intro video, I'm sure they are Excellent Materials.. I''ll be Scouting.. Wow!! Even the Notes Section in the Video is Full of Good Tips/Links, etc. Basic Bits to get started, etc... Thanks. If you happen to read this.... What do you think about the China 4x8 CNC Routing/Carving Tables with ATC/Vacuum Table, etc.. Seems, if they follow Instruction(GCode), they should work like a US Name brand? As long as you can import files, or connect a computer to them? I don't have a foggy clue..
Lots of videos but this one made more sense to me a s BEGINNER... assume I (we) don't know anything about design to making sawdust, yet I'm building my own CNC.
I have been contemplating getting a CNC as they really peak my interest, yet I really know absolutely nothing! In doing my usual research, I came across your video and found it so refreshing and informative as a total newb! You now have a subscriber and I look forward to beginning my journey with you!
It's really not hard once you learn a bit about it. Just take your time reading and watching videos, double check everything before you run a program and watch your first couple parts get cut.
Product design online. Your content is soooo amazing!!! I’ve been following your 30 days tutorial and it’s helped me sooo much. Thanks for all your amazing content!!!
This video is super informative. I haven’t yet built my cnc machine, but this helps a lot in terms of really understanding how they technically function and the software to start with. Gonna try creating some ideas I have and se show they pan out.
how do you tell the cnc where the material is in relation to the spindle? if you tell it to start moving from the center of the work area how do you tell it that the material is in the upper left corner?
New sub here and excited to watch all the other videos on cnc’s. We are looking at buying one and I’m overwhelmed by all the info that makes not much sense. But your video has helped already.
I’m starting to be good in tinker cad and I’m going to buy the cheapest Amazon CNC Mill. All I want to do is cut custom graphite molds for pouring silver. Wish me luck
how to control steps movements, like lets say we have 400 circular points to move one by one and i need to move pointer in following example sequence starting from 0->10->240->45->28-> .......... -> 400 . How can we automate this ..
Hi , please can you help....I'm looking to machine some detailed parts out of 3mm thick copper sheet and would be really grateful if you can recommend the best, but cost effective grade...I've narrowed down to c111 copper/sulphur alloy vs c145 tellurium/copper alloy? Please note that I must use copper, not brass. Many thanks in advance, Luke
Hello expert, please help ...... my home printer randomly stops on straight lines in curves, the GRBL says error ID33, I have changed everything Arduino, Shiel, Grbl, UGS and it keeps stopping in the middle of the job. Thank you for your work
Problem - Have designed a "shoe box" and have no problems machining the pocket from the top etc. BUT when I try to produce the g code to machine a pattern I have on the bottom of the box the post processor still wants to work from the top position. So how does one redefine the Z axis to machine the bottom? Your great videos have go me this far but I could not find an answer to this problem.
As rudimentary as this video was, I think that you still missed some steps with setting up the router before cutting your piece. I don't know jack about these machines, but at the wood shop that I go to for working on my projects, we have a CNC machine there and the guy who has seemed to taken over using it without allowing the rest of us a chance to learn it gave me a a simple guidance outline. One thing was making sure that your router was centred on your project and that you set the depth for the surface of the piece before starting. I seemed to miss this here. I think that learning how to operate a CNC requires a hands-on approach along with a tutorial in order to get a full comprehension of its workings. JMO Cheers!
That's a great point! Thanks for sharing :) I didn't include anything machine specific, because as you pointed out - there are many additional variables to consider. This video was intended to help folks understand the basic process as to what's involved (software, machines, etc) so he or she can determine if they're still interested in getting a CNC machine. Happy new year!
complete noob to the cnc machine world and i just learned more in this 9 minutes than i have in the last couple days searching up videos on the matter. You've def made it very simple to understand with clear instructions on the process. I'm eyeing the onefinity or the ooznest workbee. Which do you think is the better buy? each have a couple months lead time.
Hello, wanted to ask about lead screw. Why do we need bearings while the lead screw is attached to the coupler and stepper motor, isn't the stepper motor and the coupler plus the housing, enough for the stability of the lead screw or in other words, what is the purpose of the lead screw bearing ? to cnc router ?
@@ProductDesignOnline tks for the answer. Actually, there's a lot of information in the fusion 360 that does not seems to be there anymore in the version I have like the dimension for instance, I don't know if it matter or not. tks Seby
Hello - I am totally new to all of this… I currently purchase my wooden kids toys from overseas manufacturer but want to learn myself, what things do I need to consider when purchasing a CNC? And thank you for your video…very helpful and plan to watch more!
Do you plan to cut any materials other than wood? If so, make sure to research the potential machines as some aren't powerful enough for all material types. You can get some pretty affordable machines to cut only wood.
@@ProductDesignOnline only wood . One more question… and forgive me I am very new to this. How do I know that the machine will cut the size pieces I need ? Okay 2 more…. What do I look for on the machine specs ? Thanks again!
@@NancyZ-x9i When looking at machines you should look for the 'cutting size' as that is often smaller than the listed 'machine size'. If you have the space, I would recommend getting at machine that is 4x4' so you can do half sheets of plywood, and other large boards. In terms of other specs, if you're doing mainly wood than you can't go wrong with most machines. What will be more important at that point is getting good endmills for cutting the wood, and replacing them if/when they get damaged. Cheers!
Yep! Metal cutting also has the added layer of "coolant" (or fluid) to ensure eit does not overheat. With that said, on most hobbyist-level machines you will be able to mail aluminum, copper, and other soft metals without a coolant, you just need to run slower.
This is a pretty good primer for the future desktop CNC hobbiest. It skipped over the Control part other than to very briefly discuss GRBL. I would like to have also seen LinuxCNC in there. Which is ideal for the hobbiest IMHO. Also how about as a next video a review of 100% free software toolchain products? The cost of software from the hobbiest can come as a shock.
Yes, you can cut soft metals: brass, aluminum, etc pretty easy on these hobby level machines. If you plan to cut a lot, you'll want to look into getting a coolant dispenser.
nice video! good to clear alot of things for beginners ,and reduce the fear to own a CNC machine, i liked this very much, but 2.5D is something more advanced than you described! 2.5 D is close to 3D but with using the bit parameters and how deep can it go or behave into material in reference of the design or victors you made! Yet its a useful and awesome video! i wish i can explain things the way you did, when i train my clients! 👌👌👌👌👌
Thanks for a great video. Just wondering, if I want to use a CNC router to cut woodblock prints, what machine would you suggest I buy. Probably only 2-D applications. Thanks.
Great basic intro, although missing a gentle reminder that, however you're fixing your material in place, you should make sure things like clamps and screws aren't in the tool's path!
So I am 3d modeller primarly desining models for 3d print, but my mother wants to start working and designing wooden objects. By that it means She will come with idea and I will ahve to sculpt and design everything. Does the CAM software can take OBJ files?
Yes, you can setup CAM toolpaths for OBJ/STL files. You can also convert the STL to a Solid and set up toolpaths with that (ruclips.net/video/tVGtG-UjlYg/видео.html). Depending on the model and geometry, each workflow has pros/cons.
Nice video, What machine would be best for copying something once I have made a part? need it be metal, maybe a hand cnc machine? is there a machine like that, Thanks
Thanks! I'm working on some CNC content and will be sharing more at the end of the month. Got a few courses in the works and can't keep up with everything :D
@@ProductDesignOnline That's super exciting! You really have a great style as an educator. I'm sure it will be a solid video and very useful. If you don't mind me saying, there's no rush. Your content is amazing for learning and for reference. But people still need to take the time to learn some things themselves. I hope you don't feel too much pressure to get content out. But either way, thank you for everything you're doing!
As someone who is getting into this I found it very helpful! With fusion360 am I able to just import a 3D model into the software and have it start cutting?
@@ProductDesignOnline Oh awesome! I'm attempting to make my own gameboy advance shell out of aluminum but I haven't a clue how to do it but I really wanted to try it cause I'm gonna paint it and all that, so I'll have to do some setup but a 3d model of it will help most of the way? That works for me :D I'm looking forward to learning it. I'm just not sure how to turn raw blocks of aluminum into a shell lol
@@piplup10203854 Your main challenge with that will be making sure you set up the file with the same WCS (start point) so you can flip the part to mill the second side. I would suggest starting with a simpler 2D milling project first to get familiar with the Manufacutre environment in Fusion 360, then transitioning to 3D parts (such as the gameboy advanced shell - cool project, btw) will be easier. :)
@@ProductDesignOnline Oh, setting up the file to have the same start point? I see, so I'll mark exact coordinates for the WCS so when I finish the one side, I can flip it and then mill from the second side? Oh gotcha, what do you suggest as a good starting point then and thank you! I saw a really cool opportunity to get my own block and I picked up a CNC for cheap and thought it would be really cool to do my own shell and stuff. I been waiting on a custom for a year but no luck figured why not try to do it myself :)
Check out "Langmuir Crossfire" which is a great affordable option. Avid CNCs have some as well. I also recommend sendcutsend.com for fast laser cut metal parts (w/ free 2-day shipping!)
Please help, ive built a good 3 axis router/mill , it has a mach3 usb interface, i can manually jog the machine in mach3. what free software can i use to design/draw and then convert to g code for mach 3 to drive the machine? only interested in 2.5d z axis cutting or up 20mm/not cutting. for cutting out simple parts like a 5cmx5cm square with rounded corners and a 3mm hole in each corner. thanks
Hi do you have any experiences with print design and then cut contour? I am new at and look for software what can do this. Example - print design on UV flatbed printer with reg.marks and then cut around via cut contour. Thank you
I used to run a Mymaki one. You can't run anything like that from Fusion 360. You will typically need to use the software recommended by the manufacturer as many of those machines are 'locked down' and require preparatory software.
I'm interested in ordering one of these but I'm confused with the ordering process with all the options available. I would like to stick with dewalt if possible, I have a Dewalt DW618 but don't mind buying a DW611. What MM size do I need to chose for this option. I sincerely apologize for asking this buy I'm very new to the CNC world and have been looking for the right choice, 7 months later I still find the one you featured here to be the best choice. My other concern is size. My table that I have is 24" depth from the wall of my basement to the edge of the table where I would like to place this unit. Would you happen. Yo have a 24" x 30" wide unit? Or just the 12" x 30" as the smallest size?
12x30 is the smallest size for the new one. There used to be a 12x12 option, but that is not available with v2. 12x30 is a great option for your table size, as that will leave some room around the edges for tools, and or material overhang. You'll want to select 71mm for the DeWalt (DW611) router - bit.ly/longmillcncref
Create a board the size of your cutting area (not the size of the whole machine) and then apply a simple facing operation using the real criteria per your facing bit. You'll then be able to run that toolpath to flatten/clear out the spoil board. I just did this the other day, so my spoil board is nice and clean...perhaps, the next time its ready for it I'll have to make a video on it :)
How do you like your LongMill after using it for an extended period of time? Is there anything you would recommend (or not recommend ) about it? thanks
Poop Emoji STL: bit.ly/poopEmojiSTL
**Dust Collection**
5-inch x 10-ft Flexible Dust Collection Hose - ****collabs.shop/mo0udn
5-inch wire clamp - collabs.shop/wuwehv
4-inch wire clamp - collabs.shop/3nk3m4
Duct Wrap - collabs.shop/caxz6w
Dust Boot - collabs.shop/4ajtis
Dust Boot Brush - collabs.shop/3ucm0l
*End mills (Bits)*
23-375 - 3/8 x 1.25" - Compression Spiral 2 Flute Carbide End Mill - ****collabs.shop/esfe42
20-250 - 1/4 x 1" - Upcut Spiral 2 Flute Carbide End Mill - collabs.shop/qmylyu
CNC Router Sheet Tooling Kits - collabs.shop/xpm6ku
Desktop CNC Router Tooling Kits - collabs.shop/nhrvsb
Sir: you are clear and to the point and after watching your video for 5 minutes, I knew that you were the person I was looking for to help a novice like me decide on choosing a CNC router and learning software. just brilliant, Thank you, very much, you need to get paid for your work.
I fully agree! He breaks it down very simply. I can't wait to watch more videos
As everyone else said, this is very clearly explained in plain language, and that is probably a more difficult feat than running a CNC! Thank you
Love the simple explanation of how to get started and what each step of the process does! Makes me less worried about starting a project 👍🏻
This was really great. I’ve watched about 25 others and yours was by far the easiest to follow. Thank you!
Thanks, Rhonda!
I a CNC programmer and you explain that in a awesome way! .. very recommended
Thanks, Gamal! What machine(s) do you operate/program for?
Hello i just discovered the field and im wondering at what depth you should know physics math programming and graphic design to operate these machines
Who is known as a CNC programmer >> i am also in the same field . would love to hear from you
Great video. I assembled an MPCNC eight months ago and have watched a ton of CNC videos to build my proficiency with my machine. This is by far the best introduction video I've seen on the subject. In watching all these videos I've noticed one area that is seldom covered that might fit with your channel: interesting beginner projects created by knowledgeable people focused on one specific area, and using inexpensive materials, common router bits, and that mill in a relatively short time. I've had to create these kinds of projects for myself to learn and would have loved projects where I could compare and contrast my results with someone knowledgeable. I look forward to your future videos.
Hi Robert. Thanks for the suggestions! I do plan on doing several beginner projects to showcase the various CAM features/workflows. I'll definitely keep in mind the 'standard' bits and things so people aren't expected to go buy several items for one project :)
Thank you. Finally a video for beginners that a beginner can actually understand. Every ither video for beginners assumes the beginner knows far more than a true beginner actually does.
I simply want to draw tge panels to make a dovetail joined wooden box and then cut the pieces out if a sheet of plywood.
Thats all I want to learn for now but cant seem to find any video to show a beginner how to do it.
"The ice cream emoji" 😂 Awesome vid man!
Thanks, Ryan!
@@ProductDesignOnline You DO know that's not ice cream, don't you?
@@asdf35750 Rumor has it... it was supposed to be...but it came out wrong :)
@@asdf35750 It was actually designed as a chocolate ice cream emoji but well users are warped.
Actually, in Japan, thats no an icecream emoji. Dr Arale have the answer.
Your definition of feed rate at 4:32 is likely to cause confusion.
I am a machinist and when it comes to feed rate on a Mill it always referred to in either ipm (inched per minute) or mmps (millimeters per second) The machine interface will display this value while running.
“Feed per rev“ is used on lathes where the tool rides on a carriage which is geared to the spindle.
What counts is chip load, the amount each cutting tip (or flute) removes. On a lathe there is only one tooth so it is the same as feed per rev. On a mill the formula to find this is:
Feed rate = rpm x number of flutes x chip load
Common roughing chip load in steel is .008” on a mill. Many many variables to find a good chip load, rigidity of the machine being a huge factor.
This is true. Chip load has everything to do with getting the most life out of your cutting tool. What is seldom mentioned including this video is that the hobby machines are no way capable of running high enough feed rates or being built good enough( spelled rigidity) for a good chip load. Your tools will die a short life due to the heat.
You're not wrong, but the point was to get beginners into things without being overwhelmed. It's pretty highly likely a hobbyist isn't going to need to know how to calculate speeds and feeds. Chances are if they're machining some heavy duty materials they likely know what they're doing.
I’m talking to a girl who said she wants to try CNC so I’m doing some research very educational thank you
Have a good day Kevin Kennedy, I started learning solidworks to model 3d parts but as you know it was very complex as a beginner, but one day I found your youtube channel and saw that you have the tutorials for learning "Fusion 360 in 30 days" and as soon as I saw your first video, I was amazed by the very goog explanation and the part by part teaching, and because of that, I followed the videos and finished all that series, and now thanks to you, I can design all that I want to or need to and 3d print it and it is great!. Now I bought the 3018 chinese CNC and at the moment I´m using vectric aspire with it, but I think that it will be perfect to learn from you how to CNC directly from Fusion 360 as it looks something intimidating, so, please continue with this project it will be great something like a "Learn CNC in 30 days" or so and THANK YOU VERY MUCH for all the time and effort that you take to make this channel possible, not only for me but for all of us who watch your channel, you are a great great guy! Atte. Jorge
Very good video. I used youtube videos to learn how to operate a hobby level "WorkBee" CNC machine 3 years ago. I use Photoshop to design and VCarve to trace my lines and create G-code. The company I now do work for uses two of these entry level machines in their workshop. We use them to both personalise and more importantly speed up part of the manufacture process of high quality wooden garden gates which are sold online. For me it has become a full time job and just love doing this work.
Very informative!
I’m considering an education in cnc carpentry, but got sort of scared off thinking it was super complicated. Thank you for simplifying it :)
I have had my Longmill CNC fo about 7 months. It has really made my project a lot better and faster. Not that hard once you get into it.
Can you use blender for the modeling and transfer it over?
Excellent Video. Nothing like an Overall Conceptual View of what Basics you are going to learn,,, BEFORE Diving into all of them... I can tell that you have taught, and others have asked questions, and you paid attention to the "Why" they asked them.. Very, very good job on an Intro to CNC of any type.. Thank You! You filled in a lot of gaps that should have never been there to begin with... Outstanding.. If your Courses are anything like this Intro video, I'm sure they are Excellent Materials.. I''ll be Scouting..
Wow!! Even the Notes Section in the Video is Full of Good Tips/Links, etc. Basic Bits to get started, etc... Thanks.
If you happen to read this.... What do you think about the China 4x8 CNC Routing/Carving Tables with ATC/Vacuum Table, etc.. Seems, if they follow Instruction(GCode), they should work like a US Name brand? As long as you can import files, or connect a computer to them? I don't have a foggy clue..
Is there any video to learn about the basic working of cnc laser machine (co2)
Lots of videos but this one made more sense to me a s BEGINNER... assume I (we) don't know anything about design to making sawdust, yet I'm building my own CNC.
This is the best explanation I’ve heard and I’ve been binging CNC vids for a few weeks. Thanks so much! I’m now certain I want to take the plunge!
Best of luck ☺️
I have been contemplating getting a CNC as they really peak my interest, yet I really know absolutely nothing! In doing my usual research, I came across your video and found it so refreshing and informative as a total newb! You now have a subscriber and I look forward to beginning my journey with you!
It's really not hard once you learn a bit about it. Just take your time reading and watching videos, double check everything before you run a program and watch your first couple parts get cut.
Product design online. Your content is soooo amazing!!! I’ve been following your 30 days tutorial and it’s helped me sooo much. Thanks for all your amazing content!!!
ice cream emoji.. who gonna tell him
It’s called humor
this also a humor
One man's ice cream is another man's pile of sh!t
Let his mind be in the clean mode... Maybe, we're on the wrong side 😅
This video is super informative. I haven’t yet built my cnc machine, but this helps a lot in terms of really understanding how they technically function and the software to start with. Gonna try creating some ideas I have and se show they pan out.
I didn't know anything about cnc.your video was great full for a beginner like me.thank you❤️🙏🏻
how do you tell the cnc where the material is in relation to the spindle? if you tell it to start moving from the center of the work area how do you tell it that the material is in the upper left corner?
New sub here and excited to watch all the other videos on cnc’s. We are looking at buying one and I’m overwhelmed by all the info that makes not much sense. But your video has helped already.
I’m starting to be good in tinker cad and I’m going to buy the cheapest Amazon CNC Mill. All I want to do is cut custom graphite molds for pouring silver. Wish me luck
You got this! 💪
Hi Can you link a copy of the document you show showing feed speeds etc?
Great info. I am trying to find one that explains the tool paths. Like what is a peck?
how to control steps movements, like lets say we have 400 circular points to move one by one and i need to move pointer in following example sequence starting from 0->10->240->45->28-> .......... -> 400 . How can we automate this ..
How to incorporate CNC router to Arcus Servo Motion 3 or 4 axis servo/stepper comntroller
After watching the video, i have only one thing to say, I Love you sir.
Hi , please can you help....I'm looking to machine some detailed parts out of 3mm thick copper sheet and would be really grateful if you can recommend the best, but cost effective grade...I've narrowed down to c111 copper/sulphur alloy vs c145 tellurium/copper alloy? Please note that I must use copper, not brass. Many thanks in advance, Luke
This is a great introduction to CNC. Thanks for sharing.
does anybody have the rough cutting cheat sheet or can tell me where to find it. I could not find it online. thanks
just pause the video and snap a screen shot, if you haven't already
Great video! Really helped me understand CNC basics. Excited to start my own projects now! 🔧
Glad to hear that! Which CNC machine do you have (or plan to get)?
Hello expert, please help ...... my home printer randomly stops on straight lines in curves, the GRBL says error ID33, I have changed everything Arduino, Shiel, Grbl, UGS and it keeps stopping in the middle of the job. Thank you for your work
Problem - Have designed a "shoe box" and have no problems machining the pocket from the top etc. BUT when I try to produce the g code to machine a pattern I have on the bottom of the box the post processor still wants to work from the top position. So how does one redefine the Z axis to machine the bottom? Your great videos have go me this far but I could not find an answer to this problem.
Excellent video. Clear, plain language demo. Excellent video work.
can you drop a link for feedrate en this like that for different materials i cant find them like in the video like the list in the cam part please
As rudimentary as this video was, I think that you still missed some steps with setting up the router before cutting your piece. I don't know jack about these machines, but at the wood shop that I go to for working on my projects, we have a CNC machine there and the guy who has seemed to taken over using it without allowing the rest of us a chance to learn it gave me a a simple guidance outline. One thing was making sure that your router was centred on your project and that you set the depth for the surface of the piece before starting. I seemed to miss this here.
I think that learning how to operate a CNC requires a hands-on approach along with a tutorial in order to get a full comprehension of its workings. JMO Cheers!
That's a great point! Thanks for sharing :)
I didn't include anything machine specific, because as you pointed out - there are many additional variables to consider. This video was intended to help folks understand the basic process as to what's involved (software, machines, etc) so he or she can determine if they're still interested in getting a CNC machine.
Happy new year!
Is this CNC 101 software free to download ? If yes Can you share the link? I am using CNC simulator pro software..
I'm glad youtube fed me your video. I had no idea this was a multi step process. I thought it just jumped from CAD to the machine somehow.
1:53 why didn't you meantioned FreeCAD?
good cheap CAD
whats wrong with using freecad? you didn't mention that one in your video.
Wow, so much information in just a few minutes! So cool and informative!! Love it!!!🥰
Would you mind sharing your SFM cheat sheet; been looking for one.
complete noob to the cnc machine world and i just learned more in this 9 minutes than i have in the last couple days searching up videos on the matter. You've def made it very simple to understand with clear instructions on the process. I'm eyeing the onefinity or the ooznest workbee. Which do you think is the better buy? each have a couple months lead time.
Hello, wanted to ask about lead screw. Why do we need bearings while the lead screw is attached to the coupler and stepper motor, isn't the stepper motor and the coupler plus the housing, enough for the stability of the lead screw or in other words, what is the purpose of the lead screw bearing ? to cnc router ?
Is it possible to have the configuration file for that machine FOR Fusion 360 or a video on how to set it up?
Tks
Seby
As in, you have the Longmill specifically?
I cover some of the machine setup here: ruclips.net/video/UFb7F6GRojc/видео.htmlsi=sSqteLxa-yWCGBJ9
@@ProductDesignOnline tks for the answer. Actually, there's a lot of information in the fusion 360 that does not seems to be there anymore in the version I have like the dimension for instance, I don't know if it matter or not.
tks
Seby
Great instructions for a newbie like me. Thank you for the simple and understandable information! I learned a lot!
How about using FreeCad for all three steps of CNC Manufacturing???
Use the program that best suites you and your workflow. FreeCAD is a viable option :)
I really liked how you explained. Also adding the vocabulary helped alot
Thanks, Dale!
Thank you so much for the clarity and simplicity of your explanations. Where can I find the cheat sheet? Thanks again. Simone from France
Thanks, Simone! What machine are you planning to use? I can point you to a cheet sheet better suited to that.
@@ProductDesignOnline I have a CNC 3018 Pro . Thanks again!
Loved this tutorial.. you made it learnable.. lol
You've just gained a new subscriber.
Thank you so much for this information, please can you make videos a lot of trouble shoot..?🙏
I wanna know more. Question: which or what kind of motor do I need to cut or shape stainless steel? And where can I find them?
Best Vedio for beginners .
Thanks for the clear explanation ❤️
Hello - I am totally new to all of this… I currently purchase my wooden kids toys from overseas manufacturer but want to learn myself, what things do I need to consider when purchasing a CNC? And thank you for your video…very helpful and plan to watch more!
Do you plan to cut any materials other than wood? If so, make sure to research the potential machines as some aren't powerful enough for all material types.
You can get some pretty affordable machines to cut only wood.
@@ProductDesignOnline only wood . One more question… and forgive me I am very new to this. How do I know that the machine will cut the size pieces I need ? Okay 2 more…. What do I look for on the machine specs ? Thanks again!
@@NancyZ-x9i When looking at machines you should look for the 'cutting size' as that is often smaller than the listed 'machine size'. If you have the space, I would recommend getting at machine that is 4x4' so you can do half sheets of plywood, and other large boards.
In terms of other specs, if you're doing mainly wood than you can't go wrong with most machines. What will be more important at that point is getting good endmills for cutting the wood, and replacing them if/when they get damaged.
Cheers!
I want to get a system for my wife for simple signs can you tell all and where to purchase it
Thanks great video
Hi Bruce, I recommend a LongMill CNC for simple objects like signage/furniture: bit.ly/longmillcncref
Very useful video for cnc machine beginners 😊
You are the best in tutorials
Thanks, Hasan :)
does this apply to metal cutting too?
Yep! Metal cutting also has the added layer of "coolant" (or fluid) to ensure eit does not overheat. With that said, on most hobbyist-level machines you will be able to mail aluminum, copper, and other soft metals without a coolant, you just need to run slower.
Absolutely great video ! Helps this newbie a lot ! Thank you.
Thanks, David! Glad to hear that.
This is a pretty good primer for the future desktop CNC hobbiest. It skipped over the Control part other than to very briefly discuss GRBL. I would like to have also seen LinuxCNC in there. Which is ideal for the hobbiest IMHO. Also how about as a next video a review of 100% free software toolchain products? The cost of software from the hobbiest can come as a shock.
Does this work with brass metal, too? I would like to customize wax seal stamps.
Yes, you can cut soft metals: brass, aluminum, etc pretty easy on these hobby level machines. If you plan to cut a lot, you'll want to look into getting a coolant dispenser.
Thank you! :) @@ProductDesignOnline
nice video! good to clear alot of things for beginners ,and reduce the fear to own a CNC machine, i liked this very much, but 2.5D is something more advanced than you described! 2.5 D is close to 3D but with using the bit parameters and how deep can it go or behave into material in reference of the design or victors you made!
Yet its a useful and awesome video!
i wish i can explain things the way you did, when i train my clients!
👌👌👌👌👌
Thanks for a great video. Just wondering, if I want to use a CNC router to cut woodblock prints, what machine would you suggest I buy. Probably only 2-D applications. Thanks.
Here are the machines I recommend at various price points: productdesignonline.com/fusion-360-users-what-to-buy/#cncs
Great basic intro, although missing a gentle reminder that, however you're fixing your material in place, you should make sure things like clamps and screws aren't in the tool's path!
WAIT!!! That's the ICE CREAM emoji??!! My mind has been blown! I always thought it was something else!! Hahahahha!!!!
You are an amazing teacher! Did you study education in college?
I like this step by step tutorials
Any online class to get more information about CNC machine
I do offer an 'Intro to CAM' course on the PDO Academy - academy.productdesignonline.com/
So I am 3d modeller primarly desining models for 3d print, but my mother wants to start working and designing wooden objects. By that it means She will come with idea and I will ahve to sculpt and design everything.
Does the CAM software can take OBJ files?
Yes, you can setup CAM toolpaths for OBJ/STL files. You can also convert the STL to a Solid and set up toolpaths with that (ruclips.net/video/tVGtG-UjlYg/видео.html). Depending on the model and geometry, each workflow has pros/cons.
Nice video, What machine would be best for copying something once I have made a part? need it be metal, maybe a hand cnc machine? is there a machine like that, Thanks
May be worth getting a small metal CNC like Bantam - www.bantamtools.com/cnc-milling-machine
@@ProductDesignOnline Thanks
What application are you using?
When will the CNC playlist be expanded? Your work is always awesome!
Thanks! I'm working on some CNC content and will be sharing more at the end of the month. Got a few courses in the works and can't keep up with everything :D
@@ProductDesignOnline That's super exciting! You really have a great style as an educator. I'm sure it will be a solid video and very useful.
If you don't mind me saying, there's no rush. Your content is amazing for learning and for reference. But people still need to take the time to learn some things themselves. I hope you don't feel too much pressure to get content out. But either way, thank you for everything you're doing!
@@bubblejuiceman Thanks! I really appreciate your support and kind words :)
@@ProductDesignOnline I highly recommend you to anyone wanting to learn about CAD/CAM. Keep up the great work and I cant wait to watch more.
@@Shartie Thanks! I appreciate it. I will have more much more content coming soon :)
As someone who is getting into this I found it very helpful! With fusion360 am I able to just import a 3D model into the software and have it start cutting?
You have to do some setup per the machine and type of cut. But, in essence, yes.
@@ProductDesignOnline Oh awesome! I'm attempting to make my own gameboy advance shell out of aluminum but I haven't a clue how to do it but I really wanted to try it cause I'm gonna paint it and all that, so I'll have to do some setup but a 3d model of it will help most of the way? That works for me :D I'm looking forward to learning it. I'm just not sure how to turn raw blocks of aluminum into a shell lol
@@piplup10203854 Your main challenge with that will be making sure you set up the file with the same WCS (start point) so you can flip the part to mill the second side. I would suggest starting with a simpler 2D milling project first to get familiar with the Manufacutre environment in Fusion 360, then transitioning to 3D parts (such as the gameboy advanced shell - cool project, btw) will be easier. :)
@@ProductDesignOnline Oh, setting up the file to have the same start point? I see, so I'll mark exact coordinates for the WCS so when I finish the one side, I can flip it and then mill from the second side? Oh gotcha, what do you suggest as a good starting point then and thank you! I saw a really cool opportunity to get my own block and I picked up a CNC for cheap and thought it would be really cool to do my own shell and stuff. I been waiting on a custom for a year but no luck figured why not try to do it myself :)
Can you attach a plasma cutter on any of these cncs to cut metal ?
Check out "Langmuir Crossfire" which is a great affordable option. Avid CNCs have some as well. I also recommend sendcutsend.com for fast laser cut metal parts (w/ free 2-day shipping!)
Can you recommend one for cutting metal to make lettering and signs and such
langmuir systems is one option. Also, check out sendcutsend.com, which is a pretty cool service!
@@ProductDesignOnline awesome, thanks for the recommendations.
it is a very nice tutorial, i am had built my own cnc router, i believe that your instructions will be welcome, thanks
Thanks! Happy carving :)
I am about to enroll for a 2 month CNC machine operating course. Do you think two months is enough to be a CNC operator?
are milling, x-carve and shapeoke type of cnc or the brand?
X-carve and Shapeoko or brands/models :)
Please help, ive built a good 3 axis router/mill , it has a mach3 usb interface, i can manually jog the machine in mach3. what free software can i use to design/draw and then convert to g code for mach 3 to drive the machine? only interested in 2.5d z axis cutting or up 20mm/not cutting. for cutting out simple parts like a 5cmx5cm square with rounded corners and a 3mm hole in each corner. thanks
all good machine can use keyboard move manual and cutting work. but lot easy and simple use G-code make all work.
Very instructive and clear video on CNC for DIY. Thumbs up!
This is the only video I actually understand😄
Hi do you have any experiences with print design and then cut contour? I am new at and look for software what can do this. Example - print design on UV flatbed printer with reg.marks and then cut around via cut contour. Thank you
I used to run a Mymaki one. You can't run anything like that from Fusion 360. You will typically need to use the software recommended by the manufacturer as many of those machines are 'locked down' and require preparatory software.
So the machine is blind and relies on xyz from G-code?
Hi how to connect a mac computer to a 3018-SE CNC router machine?
I'm not familiar with that specific machine. Did yours come with a "control box"?
I'm interested in ordering one of these but I'm confused with the ordering process with all the options available. I would like to stick with dewalt if possible, I have a Dewalt DW618 but don't mind buying a DW611. What MM size do I need to chose for this option. I sincerely apologize for asking this buy I'm very new to the CNC world and have been looking for the right choice, 7 months later I still find the one you featured here to be the best choice. My other concern is size. My table that I have is 24" depth from the wall of my basement to the edge of the table where I would like to place this unit. Would you happen. Yo have a 24" x 30" wide unit? Or just the 12" x 30" as the smallest size?
12x30 is the smallest size for the new one. There used to be a 12x12 option, but that is not available with v2. 12x30 is a great option for your table size, as that will leave some room around the edges for tools, and or material overhang.
You'll want to select 71mm for the DeWalt (DW611) router - bit.ly/longmillcncref
for a beginner having corelx5 and artcam2011? what to do?
Sorry, I'm not following your question. Which stage do you need help with? Do you have a machine already?
The best VIDEO ever. Great work
Ice cream. If you say so 🤣great video
Thank you so much for clearing up some of my misconceptions. Great job!
Loved the opening comment, now if I can just figure out how to flatten the spoil board on top of my Onefinity with Fusion 360… 😟
Create a board the size of your cutting area (not the size of the whole machine) and then apply a simple facing operation using the real criteria per your facing bit. You'll then be able to run that toolpath to flatten/clear out the spoil board.
I just did this the other day, so my spoil board is nice and clean...perhaps, the next time its ready for it I'll have to make a video on it :)
Please, does anyone has an idea of how to operate CNC freeze machine software?
Thanks for sharing! This is amazing.
Great video! Thanks for taking the time to make it and with details that are easy to understand for newbs!
Hi PDO, thanks for quite a helpful video. I am wondering if you'd recommend any CNC machines for a budget user, under $500?
Check out sainsmart website
What can a 4 axis like a 3040 do?
How do you like your LongMill after using it for an extended period of time? Is there anything you would recommend (or not recommend ) about it? thanks