Liqui Moly Shooter Fuel and Oil Additives - All you need to know!

From improving fuel economy to performance and reliability. Here's all you need to know about Liqui Moly's range of 'Shooter' Fuel and Oil additives! Notably their Engine Flush Shooter, Speed Shooter, 4T Shooter and MoS2 Shooter!
Liqui Moly 4T Shooter - bikeittrade.co...
Liqui Moly Engine Flush Shooter - bikeittrade.co...
Liqui Moly Speed Shooter - bikeittrade.co...
Liqui Moly MOS2 - bikeittrade.co...
Find more information on our website along with where you can find your nearest Bike It and Liqui Moly Stockists.

[@justgjt]

With the engine flush it is recommended to pull the clutch in for a few seeconds a few times during the 10min idle time period. This will allow the flush through the clutch discs and remove gunk between the discs and steels.

[@yasirujayarathne9451]

Probably the best explanation available in RUclips for these products! 💯

[@7Rider-R]

Is it working for Scooter Yamaha Tmax 530?

[@manas123raul]

Thanks for the video. I have a question - fuel system cleaner and engine performance improver can be used together?

[@ashveersukram7444]

Hi there. With regards to liqui moly engine flush. Can it be used on a older bike 2004 gsxr 1000? Is it safe on seals and clutches. Thanks

[@dr.shivanshunarayanmishra]

Hey can i use 4t shooter and engine flush both at samw time??

[@mmalojm]

the speed aditive increases fuel octanes? or just treats the oil / fuel mixture for better performance and less friction...
and, the Mos2 shooter anti friction enhances power output in the engine?

[@MrSteve2714740]

The oil additive put into an engine with a wet clutch, if its as good as you say it is what about clutch slip? With superbike's now pushing out over 200bhp the clutch has it all on doing its job anyway so how is this friction reducing additive going to hold up to that sort of power???

[@sharathgowda8842]

Does adding 4 t shooter in tank and not using the bike for a while cause any damage to the fuel filter ??

[@prakashbiswas508]

Did you get any answer

[@user-ld6wo4rv8h]

What is the difference between the Liqui-Moly Motorbike Engine Flush and the Liqui-Moly 2037 Pro-Line Engine Flush?

[@backinblack03]

What's the difference between sku 5918 and sku 3824 other than the quantity?

[@kas4751]

Hi why is the cap on your 4T additive shooter black? Shouldn’t it be blue as it is color coded blue for fuel/gas application, black for motor oil application?

[@tymbluhhRR]

Hello how are you! Excellent video! I ask you, can I put the Engine Flush motorbike only on my Yamaha Warrior 350 quad from 1998? Is something wrong with the clutch? From already thank you very much, greetings! 💪🏻👏🏻👏🏻

[@johannironfire9286]

After putting the liqui moly engine flush inside the engine while idling, my mechanic stupidly revved my motorcycle and I was shocked! Would that damage my engine? Thanks for your help..

[@bikeit665]

Whilst it's not recommended, It shouldn't do any lasting damage. It is meant to just be left at idle RPM to circulate around the engine and do its magic, then swapped out for new fresh oil.

[@johannironfire9286]

@@bikeit665 Is it okay to put all 20ml contents of liqui moly Mos2 on a 0.7 liters of oil engine? How much do you recommend?

[@bikeit665]

@@johannironfire9286 That depends if it's a 2 or 4 stroke. If it were me, I'd try and follow the instructions which say to use 20ml per 1L of oil in a 4 stroke. So if you've got 0.7 of oil, we'd suggest using 14ml of MOS2. However if using 2 stroke oil, 20 ml per 400 ml for 2-stroke oil.

[@victor_m4_16]

I already used fuel additives before and want to use speed additives can i use it ?

[@bikeit665]

Absolutely, you can. Now your fuel system is clean, the speed additive will work to its optimum.

[@shotsbygowthaman_lilwedding]

Hi,
Saw your reply for the comments. I have few doubts. So how often or how kms once I have to add 4T additive and speed additive ? Do I need to add both while I refill the tank every time ? Or shall I add 4T additive first fill and then speed additive for the next fill ?
If yes, do I need to add 4T additives for third tank fill or when I have to use ?
Please explain.

[@jasoncloud718]

Too bad we didnt get any explanation

[@FearGodNotDeath]

Can we use ceratec in japanese inline 4 engines ?

[@felippefelipe]

Hi, how are you? I have two harley davidson, a sportster iron 883 and a sportster seventy two. Both motorcycles year 2017 with around 26 thousand kilometers. Can I use the 4t additive shooter? Will my injectors clog if the dirt from the gasoline tank comes off for all these years and I have never used this product? Please answerme

[@themalaailaanaa1347]

Just use it.

[@limleoktong9449]

can I use engine flush for my 20 years old motorcycle

[@bikeit665]

absolutely. I'm sure your engine would benefit and love a deep internal clean.

[@limleoktong9449]

@@bikeit665 ok thanks

[@bipinbopanna8447]

Where all the dirt goes, are they being dissolved

[@user-lt2st3ko8i]

Will this expire?

[@rbmuziclover]

For the Mos2 oil additives. Is it okay mix it with other brand of engine oil?
Are these additives applicable for fresh or newer engines?

[@bikeit665]

Hi Pingu, Many thanks for getting in touch. Yes, the MOS2 additive can be used with any brand of oil, though obviously it has been engineered to be used with Liqui Moly Oils best, but its properties will enhance any oil you use it with.

[@CarMumel_Anthony]

Can you put this four all at once??

[@bikeit665]

Hi ! Yes, You can use them together, for example, 'Speed' and '4T' shooters, both going into the fuel. 'Engine Flush' however is to be used on its own when changing the oil so shouldn't be used outside of these times or in conjunction with MOS2 (for example).

[@CarMumel_Anthony]

@@bikeit665 noted on this. Thanks man !

[@dhananjaywankhede5773]

Can I use "4t additive" and "speed additive" together in one time..?

[@max2207]

@@dhananjaywankhede5773 Yes you can.

[@Namo-ss1jx]

Which one to use first.. 4t additive or engine flush?

[@bikeit665]

They can both be used at the same time as each other as Engine Flush goes in the Oil and 4T goes in the fuel, however, personally, I'd always start with the Engine Flush when doing an oil change - It works great

[@gmadinaarif2321]

Sir how many km use engine flush, fuel system and speed please.

[@sivakondiparthy2074]

I do use it in every 20-25k kilometres

[@sen_batman6580]

I purchased recently an speed additive shooter which was manufactured on oct 17, seller said can be used upto 8 years. Is that true?

[@bikeit665]

So long as it's still factory sealed it should be fine.

[@themanslaughter4250]

Can I use '4T Addictive' and 'Speed Addictive' at once?

[@bikeit665]

Thanks for getting in touch. Whilst you can, to be the most efficient and offer the best performance we'd recommend running 4T fuel cleaner FIRST, allow it to do its thing, then you can be assured the system is clean and ready to perform at its best and then add speed addictive.

[@barhunkha148]

Can we use fuel system cleaner and speed additive simultaneously or back to back. Kindly suggest.

[@bikeit665]

Many thanks for getting in touch. Whilst you can use both at the same time. If it were me, I'd use the fuel system cleaner. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance.

[@hobbitthegobbit]

Hey man great video,
I have a question. Can I use 4t Additive and Speed Additive at the same time?

[@bikeit665]

Hi Devlet, Many thanks for getting in touch. Whilst you _can_ use both at the same time. If it were me, I'd use the 4T shooter with a full tank or half tank of fuel. Let it clean the injectors and any other gunk in the fuel system out before putting the speed shot fuel additive in, with fresh fuel, for best performance.
As with real shots, mixing your drinks isn't recommended! ;)

[@hobbitthegobbit]

@@bikeit665 hahaha thanks man

[@baddyamit]

@bikeit665 at how much kilometer have to put 4T additive in bike.