We are currently testing it, nothing extreme, mostly daily use to see how it holds up and we will run it through a dishwasher! We will do an update video!
When we tested the back to school water bottle in the dishwasher it held up pretty good. Using a quality clear coat over the DTF transfer should help. We'll see when we test it soon.
Hey! Is there an update to this video? How did the cup hold up in the dishwasher? Do you have specific temp settings and instructions for how you did this?
300 but time is relative :). you'll have to press multiple times to get all the way around it so just press until it appears to have stuck to the bottle.
Yes, we know that works, but some folks can't afford a UV printer or just don't have one in their arsenal. We wanted to see if you could do it with a traditional DTF transfer.
Do you think this would hold up to a thin coat of resin on the top of it. I’ve never done a sublimation or dtf tumbler but I wondered if I could epoxy it
Great video.. thank you for trying this out!
You bet!
You channel is very informative
God bless u 💙
Thank you! You too!
Crazy question but did you use the dtf powder on the film?
Yes, it will not stick without adhesive powder
Did it hold up?
It has held up great since! Thanks for watching.
How about dishwashers and stuff? Would you just recommend hand washing?
I feel like this is probably just as an important question as will it DTF. Will it handle the dish washer. I wanna know too
Mine fell off putting it in the dishwasher
We are currently testing it, nothing extreme, mostly daily use to see how it holds up and we will run it through a dishwasher! We will do an update video!
When we tested the back to school water bottle in the dishwasher it held up pretty good. Using a quality clear coat over the DTF transfer should help. We'll see when we test it soon.
@@DTFSuperstore Yes!!! I'm looking forward to that!
What type of dtf paper did you use?
I used our V2 film
Hey! Is there an update to this video? How did the cup hold up in the dishwasher? Do you have specific temp settings and instructions for how you did this?
Not yet...it's on the list though.
What type of powder did you use ?
Our Super Powder. dtfsuperstore.com/products/super-dtf-powder-adhesive-medium
What spray did you use to seal it at the end?
Just your basic Rustoleum Clear Coat from Home Depot
@@DTFSuperstorewould that spray also be great permanent vinyl to seal it?
Can you put dtf on a sublimation tumbler in a convection oven?
sublimation can happen without pressure but DTF HAS to have pretty good pressure to adhere.
Can you not use the shrink wrap to hold it on tighter? Maybe that would eliminate the wrinkles.
50/50 (Poly acrylic - Water) in a spray bottle. It needs a layer to stick to.
Thank you ! where i can find Poly acrylic ?
@@SELECTERWOLF The paint section of ace hardware, Home Depot or Walmart, or any paint store.
We didn't need that for it to adhere to the bottle. We used a clear coat to protect it after pressing.
Awesome
Thanks for watching!
What was the TEMP and TIME ?
300 but time is relative :). you'll have to press multiple times to get all the way around it so just press until it appears to have stuck to the bottle.
Update?
still working great. haven't sacrificed it...er...tested it in the dishwasher yet but we'll get an update video out soon.
Use UV DTF Transfer
Yes, we know that works, but some folks can't afford a UV printer or just don't have one in their arsenal. We wanted to see if you could do it with a traditional DTF transfer.
can you DTF a leather football?
Great idea! You can indeed DTF on leather but the air in the football makes it difficult and would likely need to be deflated.
Do you think this would hold up to a thin coat of resin on the top of it. I’ve never done a sublimation or dtf tumbler but I wondered if I could epoxy it