Hi, just got one of these from a chinese web site for a great price (230 pounds including shipping compared with 340 pounds from uk suppliers).Took five weeks to get to uk, but is genuine article. Just a few points. Firstly my wires from front wheel servos were under the battery tray which is much more convenient. Looks like someone in the factory followed your advice 😊. Secondly i had to cut out some foam to get a 4000mah 6s heavy duty turnigy battery far enough back for cog. Thirldy i had to cut out a little foam to fit my detrum receiver/gyro. I know this plane doesnt need a gyro but its built into the msr66a receiver which is all i had. Most importantly this plane flew like a dream when i maidened it today. It is fantatic, flies just as well as my freewing avanti. No trim required and lands so slowly on flaps. I also have the fns yak 130 70mm, but i think this flies better. Seems more stable. On a last note, i dont think that your adult overtone comments are at all inappropriate for this channel. They are suble enough to go over the heads of children. Keep up the good work....and sorry i dont buy from your links, but those companies do not deliver to uk.
Brian you would have never made it in the kit building days, I have spent 500 hours building top flite kits. I cant believe we complain about installing some pushrods for a plane this fantastic.
I am going to attempt to add extensions and move the receiver to the front and then run a 5k pushed as far back as possible. I like the underhanded dirty talk, and your wife is stellar with awesome fingernails. Haha. I think you should listen to her ideas a bit more. For $299 this plane is a awesome deal especially with the retractable gear.
Hi Brian . Great setups and flying. I have this fms viper. Can i ask you if i can use the bnf e -flite template viper 70mm loaded on the nx8, for this fms viper. If this is feasible. Can I use the e flite bnf template with the AR630 in the same position as you have ? Cheers kian
Flaps... I had to move the servo arm one tooth back to get the control rods to go on, unscrewing them all the way out wasn't enough. One tooth back made the difference.
Hi brian. (And camera crew) :p I got the blue fms viper V2 with the same reciever. But i kinda lost you when setting up AS3X and Safe. There was something about channel B was inhibited earlier in the setup?
Will the fms 70mm viper fly safely on a 4s battery? Yes, I know the 6s is recommended and yes I know the performance will be less, but will it fly safely on a 4s? I don't want to experiment to find out and then have it crash because it does not have enough power to stay in the air.
LOL - The camera crew has and will build planes without any help from me, but she has no interest (Thank God! I don't want to fight with her over the planes!!!!)
Ok I'm a fairly new guy, How do I do that? I should say what screen do I need to be at to do that? You guys are awesome doing this, Thank you both!@@BrianPhillipsRC
First thing, Thank you for spending time to answer questions! The F-mode it set to Switch 1: B Switch 2&3 Inhibit. Ok I the safe it is in with the gear (switch A), With the gear down the Ailerons are trying to get it level, With the gear up the ailerons go to neutral. How do I get the safe to switch B? I want to fly this thing so back!! lol Thank you!@BrianPhillipsRC
Really like your videos except for some of the subtle comments you make that seem to be more adult in nature. May just be me. Sorry if so. Lots of kids watching.
Sorry to disappoint, but for what it's worth, we target and reach a mostly adult audience, and have analytics to help prove it. That's not to say there aren't any children, and for that reason, a mixed audience, we try to keep it mostly clean here on the channel. Hope this makes sense, but if it's just too raunchy for you, we apologize...I'll try to get Megan under control - LOL ;)
Hi, just got one of these from a chinese web site for a great price (230 pounds including shipping compared with 340 pounds from uk suppliers).Took five weeks to get to uk, but is genuine article. Just a few points. Firstly my wires from front wheel servos were under the battery tray which is much more convenient. Looks like someone in the factory followed your advice 😊. Secondly i had to cut out some foam to get a 4000mah 6s heavy duty turnigy battery far enough back for cog. Thirldy i had to cut out a little foam to fit my detrum receiver/gyro. I know this plane doesnt need a gyro but its built into the msr66a receiver which is all i had. Most importantly this plane flew like a dream when i maidened it today. It is fantatic, flies just as well as my freewing avanti. No trim required and lands so slowly on flaps. I also have the fns yak 130 70mm, but i think this flies better. Seems more stable. On a last note, i dont think that your adult overtone comments are at all inappropriate for this channel. They are suble enough to go over the heads of children. Keep up the good work....and sorry i dont buy from your links, but those companies do not deliver to uk.
Wow, I don’t have the guts to have a stack of lipos like that…🔥🔥🔥🔥🔥
How many fire extinguishers do you have in your kitchen?
Thank you Brian for helping me out 57:38
You're welcome! Thanks for being here with us!
You guys are fantastic! Thank you for these detail, quality, and entertaining videos.
Brian you would have never made it in the kit building days, I have spent 500 hours building top flite kits. I cant believe we complain about installing some pushrods for a plane this fantastic.
I built kits, and have flown kits.
If you close your eyes and listen to Brian's voice, Jack Black will appear =P
Deactivated lazers with my 🍆
That is his nick name with my wife!!🎉
I am going to attempt to add extensions and move the receiver to the front and then run a 5k pushed as far back as possible. I like the underhanded dirty talk, and your wife is stellar with awesome fingernails. Haha. I think you should listen to her ideas a bit more. For $299 this plane is a awesome deal especially with the retractable gear.
This plane is great, and if you get the 5000 to work, that would be GREAT!
As usual Brian and camera crew. You never disappoint on detail and testing.
Your the one to go to . Love your videos end to end .Many thanks . Jeff 🇬🇧
Super helpful
Thanks!!!
I'M WITH CAMERA CREW ON THIS DEBATE
I was sitting here waiting for your video! 😊 I like the looks of this. Can’t wait to see it fly!
Hey Brian they will figure out the wires on the 20th Anniversary Edition
LOL - don't hold your breath - LOL LOL LOL ;)
Hi Brian . Great setups and flying. I have this fms viper. Can i ask you if i can use the bnf e -flite template viper 70mm loaded on the nx8, for this fms viper. If this is feasible. Can I use the e flite bnf template with the AR630 in the same position as you have ? Cheers kian
What is the tool called you connected linkage to the servo?
That jet looks awesome,
Great channel love it. 😊🫶
Thanks!
I use 3300 mah 40c in my 70mm jets, lighter weight better for me flying off grass here in the uk. 4 mins flight time with this FMS 3060 1900kv motor
Flaps... I had to move the servo arm one tooth back to get the control rods to go on, unscrewing them all the way out wasn't enough. One tooth back made the difference.
All of your videos are awesome.
Hi brian. (And camera crew) :p
I got the blue fms viper V2 with the same reciever. But i kinda lost you when setting up AS3X and Safe. There was something about channel B was inhibited earlier in the setup?
Remembering the SU27 it might be a good idea to put your own linkages on ?
You like this or the eflight bnf 70mm better?
Will the fms 70mm viper fly safely on a 4s battery?
Yes, I know the 6s is recommended and yes I know the performance will be less,
but will it fly safely on a 4s? I don't want to experiment to find out and then have it crash
because it does not have enough power to stay in the air.
just a fair warning, I think the camera crew is ready to move up and handle the build demo and push the old man out.. just sayin
LOL - The camera crew has and will build planes without any help from me, but she has no interest (Thank God! I don't want to fight with her over the planes!!!!)
かっこいいですね😉🐭😉✌️ 只今、中国サイトにて購入考えています😉✌️
Yes, checked the FMS site - they sell this without Reflex V2. Have to buy it separately I guess; very surprising.
No you didn't, yes you did😮 that's my next plane.
Yikes that stack of batteries....fire bags?
Smart batteries are a god-sent.
What is reflex????
Reflex is a Flight Stabilizer, that hooks to your plane
Help! my F-Mode is stuck on flight mode 3!!! What am I doing wrong?
You need to make sure you have the F-Mode set to a Channel...otherwise it won't change when you switch modes.
Ok I'm a fairly new guy, How do I do that? I should say what screen do I need to be at to do that? You guys are awesome doing this, Thank you both!@@BrianPhillipsRC
How do i reset my AR8360T DSMX 8-Channel AS3X & SAFE Telemetry Receiver?
@@BrianPhillipsRC
First thing, Thank you for spending time to answer questions! The F-mode it set to Switch 1: B Switch 2&3 Inhibit. Ok I the safe it is in with the gear (switch A), With the gear down the Ailerons are trying to get it level, With the gear up the ailerons go to neutral. How do I get the safe to switch B? I want to fly this thing so back!! lol Thank you!@BrianPhillipsRC
Jesus how much money 😊 is that in batteries lol
If you have a lot of planes, you'll have a lot of different batteries.
Can I use the AR631 with an old Spektrum DX6 ?
Yes
yes you can. as long its spectrum
on this video of yours, FMS - Viper V2 - 70mm - 15th Anniversary Edition - Maiden Flights, you dont have it open for comments
😊🫶
Sorry to say you have talked me right out of buying this plane because you are going with a 5000 instead of 3300 and running into these problems.
Really like your videos except for some of the subtle comments you make that seem to be more adult in nature. May just be me. Sorry if so. Lots of kids watching.
Sorry to disappoint, but for what it's worth, we target and reach a mostly adult audience, and have analytics to help prove it. That's not to say there aren't any children, and for that reason, a mixed audience, we try to keep it mostly clean here on the channel. Hope this makes sense, but if it's just too raunchy for you, we apologize...I'll try to get Megan under control - LOL ;)
Kids will never get the subtle comments and if they did they will be mature enough to understand its a joke
@@mariakajda1898 I know they are joking. I don't need your help or opinion'.
Can you please let me know the size of canopy? Length & Width.. please.....
3.707645" / ~94 mm Wide
13.7449920508744" / ~349 mm Long
I did all this from the spec sheet on the website.