Great video I took my 2007 X3 to BMW Roseville $950 later not fixed and recommend a $2800 computer DME.My car is not worth it in this market.I was told by BMW how much do you love your car OMG! Now I found a whole set DME ECS keys the whole shooting match $220. I just got it ready to put it in now. I wondered omg is this going to work? Yes it will great video thank you! Don’t go to the Stealership!
I recently did this swap from 01 x5 e53 m62 donor to fix a intermittent no start no crank. This fixed the problem. THank you. Now we changed also the transfer case cause mine had chain problems and the tranny due to some problems in automatic mode. My question is do I have to swap the transmission computer as well or it wont make any difference?
I think that the only issue is the vehicle VIN if using a scanner or going for a state inspection, the machine will pull the VIN of the donor. Not a huge issue
My 2006 BMW X5 turns over but won't start. It was not turning over at all before the last time. I figured to get it to start by Rolling the windows down and up fully all of them a couple times lock and unlocked it from the button on the middle console then get out and use the key in the door to unlock and lock a few times get in and it would start. I'm pretty sure it's the EWS module but my kicker is the last time I drove it when it didn't turn over etc at all and went thru all I just said, went to store turned it off and immediately tried to start it and it just turned over and when I let loose of the key, it was stuck trying to start. I had to manually turn the key back from start position. It was stuck trying to start. When I took the key out the metal part of the key was really hot!! Can you help me with this so I don't spend any more money I already bought a new Ignition the plastic module under the steering column. My gut feels it's between the key and the ignition. I think there's a short in the system in the stirring column but also the security system itself. I need some help please... Thanks in advance. Please PM me so I get an email. Jerry
OMG! Somebody that actually have the same exact issue I have. I’ve been everywhere talking about my issue and nobody understood what I was saying about the key getting stuck in the start position and when released it just stays and cranks by itself till I manually turn it backward. Have you ever found a fix for it? This is crazy. I changed the fuel pump and everything, still nothing.
How about if you put the original ignition inside with the new ECU etc… would that have worked? Do you have a set up for a 2004 BMW 645ci, and if so what is it going to Cost me ? Last question is how do I take out the ignition cylinder of my 645ci. I tried turning the key one click forward, and placing a paper clip into the hole and it’s not coming out.
Hi great vid and very old now but hopfully people are still about. Do i need to do any programming or is it just a matter of swapping out the parts and i can then start and drive my car?
You would first need to diagnose your bmw to make sure that you need the DME kit. If thats what you need, then after swapping parts, your car should start without programming. However, if after installing parts you have same issue, then DME wasn't what you needed. Hope that helps
I am fitting a v8 E39 into a E39 ^ cylindlinder body - both card were running, the v8 will not crank -have changed EWS and it has the V8 DME - havent changed the key yet - any suggestions why it is not cranking
Bro i need ur help i have 330ci 2004 it’s giving me the same problem no crank no start so now I ordered the whole dme and ews with the key if i just simply replace it will it work
How would I know if my dme is bad on my 2002 X5 4.4 cranks starts for less than a second or is it a fuel pump or relay or throttle body need some guidance in trouble shooting please thanks bro
Hey bimmermerchant I'm stuck here, I'm working on a 2004 BMW x5. The car has no power at all, you turn the key on none of the light come on the dash nor does the engine turn. I've checked the power from the battery to the rear fuse box and there is power going there. When I check the fuse box in the passenger side there is no power going to it just ground. There is power going to the alternator, thank you .
I would like to purchase the due, ews and key lock and keys assembly kit for my 2006 X5 BMW asap. I have tried with aftermarket ignition and still just turns over no start. Price and details for payment please. Thanks, Jerry
Thank you for watching our channel. Yes you could visit our website and check what we have WWW.Bimmermerchant.com Also please feel free to share our channel to anyone that could also benefit from it.
I recently had my X5 diagnosed that required a new DME. I was told that my DME could not not be reprogrammed or fixed. The few companies saying they could did not make me feel comfortable .
Do you guys still have the set? And another thing if it was just my immobilizer that got messed up can’t I just change that or I’ll have to change it all?
I have a bmw x5 2003 my tcm isn't working if I buy one on eBay can I just change out this part or will I have to change everything it is a v8 4.4 petrol?
I just purchased the same components and swapped them all over from the same car and now my 2002 X5 E53 4.4i cranks on and off but won't start...? Got any tips on what to do? I also swapped all the original stuff back in the car and still no start. EWS, DME, Ignition and key.
@@bimmermerchant oh dang today I took from a x5 bmw put in my z4 and the part numbers didn’t match I paid for the key program and it didn’t work just cranks
yes sir the main question alot of us have is , what vehicles can we interchange these systems of course the 740i 2000- 2002 also has the 4.4 engine but i dont think these combo switches are interchangeable. i have an auto dismantling yard in duarte california and we interchange 328i dme combos, 325i and 323i combos etc.. some of these are interchangable but not sure about the x5 . will a 330i interchange with and x3 or an x5 (3.0) ? i have doubts due to the AWD systems but not sure??
Steve Aguilar Great question. BMW with automatic transmissions use independent computers for engine and transmissions. When doing a swap, only the DME, key, ews and tumbler are changed, transmission computer is left alone. Since 330 and X5 3.0 have the same engine, most DME kits will work, you would just need to make sure that DME have same part #'s
@@bimmermerchant this tyrone i think you may have answered one key aspect of my imposed remarks on this subject matter. I now do know that the BMW's 330i and my 2006 X5 3.0 E53 M54B30 both use same exact engines. My question now is will the wiring be simple plug an play or modifications will be necessary to plug each connector into its proper location?
Hi bimmermerchant!!! After swapping this kit , does the new key fob work? To lock and unlock the doors, trunk, or I have to program it? Can I do it myself? Thanks
Thanks for the video and wisdom, however I seem to be having a similar problem with my ignition not turning motor. 1st time it happened I worried something electrical was going on. Before anything, I decided to try valet key and to my surprise it work with out a flaw Thank God! Unfortunately it just happened again and I don't have anymore keys to test last scenario. I had just replaced fuel filter and was trying to get fuel system going when ignition stopped turning engine. Everything lights up with no other problematic symptoms. Please shed light on my situation ! Going to replace FOB Diamond key battery now.
+1SRS E53 X5 Get a key from the dealer based on your VIN. Battery is for the remote function and will not fix starting problem. Keys are about $150 and come cut to ignition and programmed to the immobilizer. Remote needs to be programmed, very simple procedure.
hi you say you can swap them over long as you have all them does it have to be the same x5 ect I have a 3.0D sport auto can I use one from a petrol many thanks for any info
Major issues... My dme got soaked in the compartment which toasted my computer and I have wiring issues and I need a complete set for a 2002 X5 w/4.4 engine... HELP!!!!!!
I am swapping engine from a x5 4.6iS to my E38 3.5. I was wondering wherever I can swap DME and EWS from x5 to e38. They look very much the same to me.
Jovanni Rivas I need one as well?are u getting misfires ? Or what’s the issues your having that’s needing to swap the dme ? My truck tells me to replace it? Is there an alternative?
@@bimmermerchant do they have to be exact same year ? Or just same engine.. Im fixing a 96 740il and got the engine from a 97 740i. Everything looks the same,
Can I swap a DME, Tumbler, EWS 2 (Matching downer). If my E38 has a EWS 3 system. It appears that the ports all match, know that ews 3 uses rolling code, but if i swap DME, Tumbler from a EWS 2 is there something that will stop ignition.
EWS holds VO / VIN / coding. DME software might be different EVEN if the same engine. You will never be able to get a key from the dealer if goes bad or lost. This is very stupid way of doing a simple DME swap. You should stop telling people these things.
How about key remote to unlock/lock the doors? Does the new (donor) key have the function to do it? Thank you.
Great video I took my 2007 X3 to BMW Roseville $950 later not fixed and recommend a $2800 computer DME.My car is not worth it in this market.I was told by BMW how much do you love your car OMG!
Now I found a whole set DME ECS keys the whole shooting match $220.
I just got it ready to put it in now.
I wondered omg is this going to work?
Yes it will great video thank you!
Don’t go to the Stealership!
Where did you find DME ECS keys?
I would like to buy one of these kit for my 2003 BMW X5 4.4l.. Do you have any available? Thanks
Thank you watching out channel. At the moment we don't have it in stock.
@@bimmermerchant okay cool.. Please keep me informed as I am in need of a 2003 BMW X5 4.4L E53 kit ASAP
@@bimmermerchant I want to purchase the kit for my 2006 X5 BMW please
I recently did this swap from 01 x5 e53 m62 donor to fix a intermittent no start no crank. This fixed the problem. THank you. Now we changed also the transfer case cause mine had chain problems and the tranny due to some problems in automatic mode. My question is do I have to swap the transmission computer as well or it wont make any difference?
How do I open and lock doors with the new key
I think that the only issue is the vehicle VIN if using a scanner or going for a state inspection, the machine will pull the VIN of the donor. Not a huge issue
My 2006 BMW X5 turns over but won't start.
It was not turning over at all before the last time.
I figured to get it to start by Rolling the windows down and up fully all of them a couple times lock and unlocked it from the button on the middle console then get out and use the key in the door to unlock and lock a few times get in and it would start. I'm pretty sure it's the EWS module but my kicker is the last time I drove it when it didn't turn over etc at all and went thru all I just said, went to store turned it off and immediately tried to start it and it just turned over and when I let loose of the key, it was stuck trying to start. I had to manually turn the key back from start position.
It was stuck trying to start.
When I took the key out the metal part of the key was really hot!!
Can you help me with this so I don't spend any more money I already bought a new Ignition the plastic module under the steering column.
My gut feels it's between the key and the ignition.
I think there's a short in the system in the stirring column but also the security system itself. I need some help please...
Thanks in advance.
Please PM me so I get an email.
Jerry
OMG! Somebody that actually have the same exact issue I have. I’ve been everywhere talking about my issue and nobody understood what I was saying about the key getting stuck in the start position and when released it just stays and cranks by itself till I manually turn it backward. Have you ever found a fix for it? This is crazy. I changed the fuel pump and everything, still nothing.
How about if you put the original ignition inside with the new ECU etc… would that have worked? Do you have a set up for a 2004 BMW 645ci, and if so what is it going to
Cost me ? Last question is how do I take out the ignition cylinder of my 645ci. I tried turning the key one click forward, and placing a paper clip into the hole and it’s not coming out.
Would the key unlock the vehicle as well ?
Hi great vid and very old now but hopfully people are still about. Do i need to do any programming or is it just a matter of swapping out the parts and i can then start and drive my car?
You would first need to diagnose your bmw to make sure that you need the DME kit. If thats what you need, then after swapping parts, your car should start without programming. However, if after installing parts you have same issue, then DME wasn't what you needed. Hope that helps
@@bimmermerchant this is a massive help. Thank you very much it is really appreciated 👍
I am fitting a v8 E39 into a E39 ^ cylindlinder body - both card were running, the v8 will not crank -have changed EWS and it has the V8 DME - havent changed the key yet - any suggestions why it is not cranking
Bro i need ur help i have 330ci 2004 it’s giving me the same problem no crank no start so now I ordered the whole dme and ews with the key if i just simply replace it will it work
How would I know if my dme is bad on my 2002 X5 4.4 cranks starts for less than a second or is it a fuel pump or relay or throttle body need some guidance in trouble shooting please thanks bro
Hey bimmermerchant I'm stuck here, I'm working on a 2004 BMW x5. The car has no power at all, you turn the key on none of the light come on the dash nor does the engine turn. I've checked the power from the battery to the rear fuse box and there is power going there. When I check the fuse box in the passenger side there is no power going to it just ground. There is power going to the alternator, thank you
.
I would like to purchase the due, ews and key lock and keys assembly kit for my 2006 X5 BMW asap.
I have tried with aftermarket ignition and still just turns over no start.
Price and details for payment please.
Thanks,
Jerry
If I was to swap the ecu and ews and just code my key would that work or would I have to swap the ignition barrel and antenna
Can this work to change the cluster to?
Hi, do you have a kit for bmw z3 with 1.9 engine
That was fixed in the CAS3 that is why programming is needed. The rolling code will not be align
Can we buy those kits from your site? Or we have to find the EWS , DME and Key/Key switch from a donor car?
Thank you for watching our channel. Yes you could visit our website and check what we have
WWW.Bimmermerchant.com
Also please feel free to share our channel to anyone that could also benefit from it.
I recently had my X5 diagnosed that required a new DME.
I was told that my DME could not not be reprogrammed or fixed.
The few companies saying they could did not make me feel comfortable .
What year and model X5 you got?
@@bimmermerchant 2012 X5 N55 35idrive
Do you guys still have the set? And another thing if it was just my immobilizer that got messed up can’t I just change that or I’ll have to change it all?
You would need to change everything mentioned in video. What year and model bmw do u have?
@@bimmermerchant I have a 2006 4.4l X5
I have a bmw x5 2003 my tcm isn't working if I buy one on eBay can I just change out this part or will I have to change everything it is a v8 4.4 petrol?
Excellent video and greatly appreciated for sharing with us. Thanks
Y didn't u show the same example but using the original key & key switch
I cannot work out where is the EWS location from the video, can you help to show me where to remove it please
EWS is a small white box located on the driver side by kick panel. Watch video again and you'll see how we swap the ews boxes. Hope that helps.
What’s your web site please
Dose it Ave to Ave the same part number are any x5 it will work on
I just purchased the same components and swapped them all over from the same car and now my 2002 X5 E53 4.4i cranks on and off but won't start...? Got any tips on what to do? I also swapped all the original stuff back in the car and still no start. EWS, DME, Ignition and key.
Sounds like a fuel issue. check your fuel pump, fuel filter or fuel injectors
check fault codes
Let me know if I have not pulled my BMW X1 frm, then whether the car will be ignited,or not
i had to get a new key for my Bmw but my ews cover ring broke and the key wont turn is that why it wont turn?
Hey love this video but I was wondering if you were to swap the dms and ews with a doner will your key work with the doors and trunk
No. That is why we sell driver front door and trunk cylinder with our DME kits so new key works with all cylinders.
www.bimmermerchant.com
@@bimmermerchant so how do we lock our car ,
whats the ecu used in a 4.4 v8 x5 please
What if I take the parts off a 08 BMW 528i and I have a 09 would it work
What parts?
Just it have to be the same car or came I use x5 in z4
You can only use bmw, ews, key and tumbler as long as part #s match
@@bimmermerchant oh dang today I took from a x5 bmw put in my z4 and the part numbers didn’t match I paid for the key program and it didn’t work just cranks
@@bimmermerchant how much are yours I have a 2003 z4
yes sir the main question alot of us have is , what vehicles can we interchange these systems of course the 740i 2000- 2002 also has the 4.4 engine but i dont think these combo switches are interchangeable. i have an auto dismantling yard in duarte california and we interchange 328i dme combos, 325i and 323i combos etc.. some of these are interchangable but not sure about the x5 . will a 330i interchange with and x3 or an x5 (3.0) ? i have doubts due to the AWD systems but not sure??
Steve Aguilar Great question. BMW with automatic transmissions use independent computers for engine and transmissions. When doing a swap, only the DME, key, ews and tumbler are changed, transmission computer is left alone. Since 330 and X5 3.0 have the same engine, most DME kits will work, you would just need to make sure that DME have same part #'s
@@bimmermerchant this tyrone i think you may have answered one key aspect of my imposed remarks on this subject matter. I now do know that the BMW's 330i and my 2006 X5 3.0 E53 M54B30 both use same exact engines.
My question now is will the wiring be simple plug an play or modifications will be necessary to plug each connector into its proper location?
for e60 from 2008 same?
Hi bimmermerchant!!! After swapping this kit , does the new key fob work? To lock and unlock the doors, trunk, or I have to program it? Can I do it myself? Thanks
You have to reprogram. There are videos kn yout in be on how to do this
Thanks for the video and wisdom, however I seem to be having a similar problem with my ignition not turning motor. 1st time it happened I worried something electrical was going on. Before anything, I decided to try valet key and to my surprise it work with out a flaw Thank God! Unfortunately it just happened again and I don't have anymore keys to test last scenario. I had just replaced fuel filter and was trying to get fuel system going when ignition stopped turning engine. Everything lights up with no other problematic symptoms. Please shed light on my situation ! Going to replace FOB Diamond key battery now.
+1SRS E53 X5 Get a key from the dealer based on your VIN. Battery is for the remote function and will not fix starting problem. Keys are about $150 and come cut to ignition and programmed to the immobilizer. Remote needs to be programmed, very simple procedure.
4773404624
+Andy G 4773404625
hi you say you can swap them over long as you have all them does it have to be the same x5 ect I have a 3.0D sport auto can I use one from a petrol many thanks for any info
I think yours has to be from another vehicle same as yours bro.
Major issues... My dme got soaked in the compartment which toasted my computer and I have wiring issues and I need a complete set for a 2002 X5 w/4.4 engine... HELP!!!!!!
check out our website www.bimmermerchant.com
i wish you can test this with a e90
I am swapping engine from a x5 4.6iS to my E38 3.5. I was wondering wherever I can swap DME and EWS from x5 to e38. They look very much the same to me.
4.6 dme should be swapped to e38
I need a computer for 2007 bmw x5 3.0
worry we dont have that part in stock
Jovanni Rivas I need one as well?are u getting misfires ? Or what’s the issues your having that’s needing to swap the dme ? My truck tells me to replace it? Is there an alternative?
What is it's just the cpu you swap not anything else will that work ?
You need to swap all four parts in order for everything to work.
@@bimmermerchant do they have to be exact same year ? Or just same engine.. Im fixing a 96 740il and got the engine from a 97 740i. Everything looks the same,
I have a 1.9 1996 bmw z3 can i put this system from a different 1.9 like a 1996 318
Not recommended. Replacement parts must be off same year/model bmw
@@bimmermerchant its manual i just want it to start its been sitting for years because i fried the ecu
Can I swap a DME, Tumbler, EWS 2 (Matching downer). If my E38 has a EWS 3 system. It appears that the ports all match, know that ews 3 uses rolling code, but if i swap DME, Tumbler from a EWS 2 is there something that will stop ignition.
Don't think you will have any issues as long as swap parts come from donor bmw with same year/model. Should be plug and play.
Hi everyone!!! Does anyone know how to remove the key tumbler on 05 bmw645ci? Thanks
Do you sell the kit EWS and SIEMENS DME MS43 for 325ci 2001?
We sell DME kits for various bmw models and can be found in our website :www.bimmermerchant.com
I don't found it
what happened if you just change the ecu .
MrSerdavid Your bmw won't crank.
Wrong. It will crank but wont fire.
Hey I have a bmw 540i it just cranks but it does not star they told me that i need to reprogram the key can I just do the same thing and would it work
If key was bad, your car wouldn't crack.
So can u help me out wt can it be
sorry, without physically diagnosing car, can't help much.
Well the car cranks but It does not stars it's just that it does not give power to start
Good advice thank you ❤
Thank you for watching our channel. Appreciate any feedback. Feel free to share our channel with anyone that could benefit from it.
Thank you for sharing this video great help.
Glad it was helpful! Be sure to subscribe to our channel for more DIY videos
how do I contact you
www.bimmermerchant.com
@@bimmermerchant
The x5 dme ews and key swap on 4.4. My question is can i use dme ews and key from a 7 series with same motor
i need 4 740i
what year?
WHOA! PRETTY SWEET HACK!
We wouldn't call it a Hack but an alternative method to fix a dme issue.
EWS holds VO / VIN / coding. DME software might be different EVEN if the same engine. You will never be able to get a key from the dealer if goes bad or lost. This is very stupid way of doing a simple DME swap. You should stop telling people these things.
Do you have one for 2004 BMW X5 4.4l ?
Do you think work to swap 530i 2005 to 525i 2004 I want to swap 530i cas dme and ingtion to 525i good idea?
Could I use a dme from a 2002 x5 for a 2001 x5?
as long as part #'s and software version are the same, then yes.
No, I did that today and it does start and drive, but rough idle and tons of codes. The eBay listing said it’ll work for any 2002 or 2001 X5.