The Angler Pro, and PP-768 battery, are only available for pre-sale with the K-1 Angler Pro Outboard Kit on IndieGoGo. If there are still some left they will be back on the website after May 4th. After that batch is gone we expect more in July/August at the latest
Hello! On the Hobie Lynx, our motors will fit ~50% of the time through the Lynx mirage drive. Somehow during the manufacturing process, the Lynx drives vary in width(which is a bit frustrating). Some mirage drives are wider/smaller than others. That being said, we've stopped recommending the mirage adapter for the Lynx kayaks. Here is a video showing what mounting adapters we recommend for a Hobie Lynx: ruclips.net/video/bvpUQNa56mY/видео.html
You would need our power pole adapter to mount the motor to your Native Titan 10.5. Here is the link to the adapter you need: bixpy.com/power-pole-adapter-k-1-j-2-motors/
Do you guys have a chart of how much amp it takes going 1, 2, 3, 4, etc mph? I know the amp draw goes up as the speed increases. This gives me an idea of time/distant based on speed based on the power draw and size of your battery options.
Q - how did you mount the power pole adapter on the Lynx to the side and not in the factory delivered mounting position? Assuming you drilled into the Lynx to mount to the right side. I like the idea so you can use the delivered steering mechanism but weary about compromising the strength of the Lynx and likely impact on the factory warranty.
Please contact info@bixpy.com for more detailed info. We are using our 3M Double Sided Adhesive. This footprint can be purchased on our website for $15. bixpy.com/3m-double-sided-vhb-power-pole-mounting-adhesive/
@@sangwna 3M adhesives are very durable and can still be removed in the future if needed. We do not have that answer but it should last for a long time. Maybe purchase a couple so you have one on hand down the road. Please contact info@bixpy.com for more information
Are the batteries able to be recharged by a truck electric systems? 12 to14.4 vdc If not, how about using a inverter 12vdc to 120vac? Will it require a true sine wave, or will a basic square wave inverter work? What wattage inverter do you recommend?
I have the J-2 motor with two batteries, wrist control, and adaptor for my Sea Eagle 420x kayak. I also have the solar panel. If I bought this new motor and kit, would I still be able to use my J-2 accessories with it?
On the bluetooth speed control, do you have to keep the buttons down with your fingertips whether traveling between spots or trolling.? I assume there are buttons to go sideways or do have to use paddle to turn?
Just needs a longer cord that can output the same amount of power. I have the smaller battery and the motor at the aft ('21 Hobie Outback), I'd like to be able to store the battery under my seat but the power cord is too short
We sell 4.5 and 9 ft extension cables so that you can store the battery under your seat. You can purchase them directly through our website at bixpy.com/bixpy-extension-cable/
I have several water toys I would love to use and transfer the motor between, but fiddling with nuts and bolts each time seems like a bit of a hassle. Do you have any future plans of releasing a quick connect bracket? Even a flat stainless steel plate with four pass through pins with allowance for locking pins on the opposite side.
Hi Peter. There's already a quick-release nut and bolt on the motor fin! It's not featured in this video, but it's that one big bolt in the middle of the motor fin. Removing that takes the entire motor off the fin. This won't allow interchange between all the adapters, but most of them. Hope that helps!
The J-2 Hobie Mirage Pedal Drive Adapter and reduced shroud that it comes with will also fit with the K-1 motor. The J-2 Low Profile Pedal Drive Adapter is different thank the K-1 Adapter.
It will be a very slight increase in speed for the K-1 and not super noticeable. The difference in quieter running will be more noticeable. The more dramatic increase in speed will come from the PP-768 battery and it's 13th speed. The PP-378 does not have the extra 13th speed.
I use my J2 for trolling all the time. I have a Hobie PA12 and run 2 mph and will run all day like that. I think it’s on about 3 or 4 speed. I add some peddle when I want.
I think that your J2 is about 32 lbs of thrust and the k1 is 33 lbs? Is this correct? Thanks for a great product! The compact K1 size is really nice. Thanks.
I bought the pro angler model and it's supposed to go to Turbo into cliques. The instructions said the battery has to be totally drained then recalibrated but the instructions really didn't specify had to do this anybody got any experience with this?
Hi Michael. The PP-768 (Angler Pro Kit) has a 13th speed which can be accessed through manually increasing speed OR using the warp speed feature to get to speed 12 and then increasing the speed once more. Warp speed works by pressing the forward button twice and then holding on the second touch. Completely draining and recharging the battery multiple times helps calibrate the battery LEDs for better and more accurate LED readings in the future uses. We hope this helps.
Yes BUT it will need a slight modification. We will be making this change in house but can also give instructions on how to adjust on your own. Please reach out to info@bixpy.com for more information.
@@raybans12 please email info@bixpy.com and they can help you further. We will have a free template to use and other options to make this easy adjustment. We can email this all over to you directly and it will be on our website eventually as well.
Sorry if there was any confusion. The video indicates that the 13th speed is only on the larger battery (PP-768) and not on the smaller PP-378. The PP-378 has 12 forward speeds and 3 reverse speeds. We hope this helps clear things up. Everything on the video is accurate.
@Bixpy no its not...look at the first mention of batteries. You distinctly say that both have 13th speed. Just trying to set you straight but if you're OK with mistake, so be it.
it depends on the width of the watercraft and how much weight is on the watercraft. which watercraft are you trying to motorize and what is the weight of the watercraft loaded with gear?
Love these motors! Would love to learn and see more about the solar charging package!
We'd love to supply you with that information! Send us an email with any questions you may have: info@bixpy.com
I love this motor, the only thing i think is missing is the ability of spot looking, I would love to have spot look ability on this motor
As much as it cost you would think that it would definitely have that feature. As well as having gps synchronization.
Yeh. More power and spot lock.
I'm a dummy. What is spot looking?
@@solarjinxhe means spot locking
Ok, but what is spot locking?@@Drumguy48
Got my k1 today looks great packing was nice, can't wait to get it on the yak! Motor is small and light very nice!
Enjoy it!
@@Bixpy we are!! We got two ..best thing to ever happen to kayaks
Do you know when you guys plan on getting more of the angler models?
The Angler Pro, and PP-768 battery, are only available for pre-sale with the K-1 Angler Pro Outboard Kit on IndieGoGo. If there are still some left they will be back on the website after May 4th. After that batch is gone we expect more in July/August at the latest
Hello. may i ask what do you need to attach k1 motor install on hobie lynx ? ( mirage place)
thank you.
Hello! On the Hobie Lynx, our motors will fit ~50% of the time through the Lynx mirage drive. Somehow during the manufacturing process, the Lynx drives vary in width(which is a bit frustrating). Some mirage drives are wider/smaller than others. That being said, we've stopped recommending the mirage adapter for the Lynx kayaks. Here is a video showing what mounting adapters we recommend for a Hobie Lynx: ruclips.net/video/bvpUQNa56mY/видео.html
I have a native titan 10, which of all the accessories to mount the engine do I need and where can I get it, thank you🎉
You would need our power pole adapter to mount the motor to your Native Titan 10.5. Here is the link to the adapter you need: bixpy.com/power-pole-adapter-k-1-j-2-motors/
Do you guys have a chart of how much amp it takes going 1, 2, 3, 4, etc mph? I know the amp draw goes up as the speed increases. This gives me an idea of time/distant based on speed based on the power draw and size of your battery options.
Q - how did you mount the power pole adapter on the Lynx to the side and not in the factory delivered mounting position? Assuming you drilled into the Lynx to mount to the right side. I like the idea so you can use the delivered steering mechanism but weary about compromising the strength of the Lynx and likely impact on the factory warranty.
Please contact info@bixpy.com for more detailed info. We are using our 3M Double Sided Adhesive. This footprint can be purchased on our website for $15. bixpy.com/3m-double-sided-vhb-power-pole-mounting-adhesive/
Thank you! How durable do you expect the adhesive to be? How often should it be replaced?
@@sangwna 3M adhesives are very durable and can still be removed in the future if needed. We do not have that answer but it should last for a long time. Maybe purchase a couple so you have one on hand down the road. Please contact info@bixpy.com for more information
@@Bixpy this is so cool, it would be amazing to see a dedicated video on this!
Wont the rudder hit the motor in certain situations?
Are the batteries able to be recharged by a truck electric systems? 12 to14.4 vdc
If not, how about using a inverter 12vdc to 120vac?
Will it require a true sine wave, or will a basic square wave inverter work? What wattage inverter do you recommend?
I have the J-2 motor with two batteries, wrist control, and adaptor for my Sea Eagle 420x kayak. I also have the solar panel. If I bought this new motor and kit, would I still be able to use my J-2 accessories with it?
I want to but it but I need to know how easy the adapter is to get on and off so I can car top it. I have an old town sportsman 106.
Which adapter are you talking about? Do you have the regular 106 or the PDL version? Please reach out to info@bixpy.com and we can help you further :)
Put to Old Town to run by motor then but try off top to car by remove from boat bottom and drive on home.
I like the size of the motor. I have a 2017 Predator Pdl, so can you tell me the best way to use this motor for my yak?
Price / supplier please for one of these in the UK? Need 1 for the kayak, as paddling is difficult with a shoulder injury. I have Tarpon 140.
When in use can the solar panels charge
On the bluetooth speed control, do you have to keep the buttons down with your fingertips whether traveling between spots or trolling.? I assume there are buttons to go sideways or do have to use paddle to turn?
Paddle to turn
Why is the K1 not available anywhere in New Zealand , only J2 available
Just needs a longer cord that can output the same amount of power. I have the smaller battery and the motor at the aft ('21 Hobie Outback), I'd like to be able to store the battery under my seat but the power cord is too short
We sell 4.5 and 9 ft extension cables so that you can store the battery under your seat. You can purchase them directly through our website at bixpy.com/bixpy-extension-cable/
What is considered trolling speed?
I have several water toys I would love to use and transfer the motor between, but fiddling with nuts and bolts each time seems like a bit of a hassle.
Do you have any future plans of releasing a quick connect bracket? Even a flat stainless steel plate with four pass through pins with allowance for locking pins on the opposite side.
Hi Peter. There's already a quick-release nut and bolt on the motor fin! It's not featured in this video, but it's that one big bolt in the middle of the motor fin. Removing that takes the entire motor off the fin. This won't allow interchange between all the adapters, but most of them. Hope that helps!
@@Bixpy Great. Thank you. Ill look into this.
Do you plan for a thru hull adapter for Native Slayer?
Will the mirage drive mount housing from the j2 fit in the k1 motor? Thank you.
The J-2 Hobie Mirage Pedal Drive Adapter and reduced shroud that it comes with will also fit with the K-1 motor. The J-2 Low Profile Pedal Drive Adapter is different thank the K-1 Adapter.
Does the K-1 increase in mph from the J-2 enough to notice it ?
It will be a very slight increase in speed for the K-1 and not super noticeable. The difference in quieter running will be more noticeable. The more dramatic increase in speed will come from the PP-768 battery and it's 13th speed. The PP-378 does not have the extra 13th speed.
@@Bixpy how much more speed do you get from the 13th speed
@@Bixpy Then why do you say it does? Edit now! No bate and switch please.
Anytging for a oldtown kayak
Can you use the motor for trolling???
Yes, the K-1 motor has 12 forward speeds with the first two speeds being more suitable for trolling. We hope you enjoy :)
I use my J2 for trolling all the time. I have a Hobie PA12 and run 2 mph and will run all day like that. I think it’s on about 3 or 4 speed. I add some peddle when I want.
I think that your J2 is about 32 lbs of thrust and the k1 is 33 lbs? Is this correct? Thanks for a great product! The compact K1 size is really nice. Thanks.
Theres always a spider in these videos...haha
Like a real spider?
Need old town options
I need a mount for adapter on Recon 120 hd
What’s the lbs of thrust on the k1 ?
The K-1 Motor produces 33lbs of thrust. We hope this helps.
I bought the pro angler model and it's supposed to go to Turbo into cliques. The instructions said the battery has to be totally drained then recalibrated but the instructions really didn't specify had to do this anybody got any experience with this?
Hi Michael. The PP-768 (Angler Pro Kit) has a 13th speed which can be accessed through manually increasing speed OR using the warp speed feature to get to speed 12 and then increasing the speed once more. Warp speed works by pressing the forward button twice and then holding on the second touch. Completely draining and recharging the battery multiple times helps calibrate the battery LEDs for better and more accurate LED readings in the future uses. We hope this helps.
I have a flat surface I order the adhesive
when do these go on sale?
pre-sale is live now on IndieGoGo. Pre-sale goes until May 4th. After that it will all be on our website but IndieGoGo orders will ship first.
@@Bixpy just bought 2 of the j-1 kits with the smaller battery, so excited to join the fam.. thanks for making a cool product!
@@natehine8541 Great! Happy to have you on board :)
@@Bixpy what kind of warranty does this k1 motor and new battery have? Can you send link to where I can pre-order?
@@raybans12 The K-1 Motor and V4 PP-378 have a 1 year warranty. You can access the pre-order page here at www.bixpy.com/igg
I have an Aruba 10 feet sit- in kayak what adapter should I use?
You would need a Bixpy Universal Rudder Adapter with a Bixpy Willfit Gudgeon
or the Universal Kayak Adapter, with our without Pole Steering
@@Bixpy Cheers lad
Do you have a video 4 dat?
@@oliverjohn5566 ruclips.net/video/hs88MaWcbXA/видео.html, ruclips.net/video/pprBsFSBgM4/видео.html
nice
Will this fit the vibe gravity rudder?
Yes BUT it will need a slight modification. We will be making this change in house but can also give instructions on how to adjust on your own. Please reach out to info@bixpy.com for more information.
@@Bixpy I have the vibe gravity rutter on my Makana. What adjustments will I have to do if I order the k1 motor kit?
@@raybans12 please email info@bixpy.com and they can help you further. We will have a free template to use and other options to make this easy adjustment. We can email this all over to you directly and it will be on our website eventually as well.
@@Bixpy I sent the request to the email above. Please advise asap. Looking at possibly purchasing the k1 if it works with my vibe gravity rutter
do u ship to malta pls?
Each adapter is a different product; it should, therefore, be dealt with - fully, too - in a separate video.
And we do have those videos! Check out our RUclips channel. This was just a walk-through of what we offer, not an install guide.
@@Bixpy, that is great! I will look into them!
Which is it, 12 or 13 speeds with the new smaller battery (white LED)? You contradict yourself in this vid. Hope the other info is accurate.
Sorry if there was any confusion. The video indicates that the 13th speed is only on the larger battery (PP-768) and not on the smaller PP-378. The PP-378 has 12 forward speeds and 3 reverse speeds. We hope this helps clear things up. Everything on the video is accurate.
@Bixpy no its not...look at the first mention of batteries. You distinctly say that both have 13th speed. Just trying to set you straight but if you're OK with mistake, so be it.
@@huntjunky1 We appreciate you trying to help us improve our videos.
Big spider 🕷at (3:23)🕷
why is the remote so ugly? looks like a chinese accident and does not fit at all to the motor, battery or brand.
What is the top speed?
it depends on the width of the watercraft and how much weight is on the watercraft. which watercraft are you trying to motorize and what is the weight of the watercraft loaded with gear?