On any hydrostatic pump. The slippers have groves in them for lubrication purposes, can not be lapped, plus you need to check the end float in the piston and the slippers, if lots of movement in slippers can cause massive failures. The lens plate can not be turned over it is one-sided only. The hydraulic functions have their own hydraulic pump and system .
gave me such knowledgeable information. really appreciate you guys. I was looking for some information on drive motor these guys filled me in with that data
Could this damage have been avoided if the machine was taken out of service at the first hint of a problem, or perhaps at the end of the day or the next day?
Sir, I have questions about the Bobcat engine. I am a Bobcat driver. Please help me. The Bobcat engine is leaking oil. It is not from Lagog. Oil is coming out from under the engine..? Thank you
Should you get steam coming of a drive motor when you drive in a puddle .. I’ve got low power on all drive and lift functions .. and bucket drops fast with a load in it
question iwth an ASV MD70. when I try to move, motor starts stalling, that tells me pump is ok and motor is ok, right? now I can't find the break details on that motor to check. Can you help?
So I’m deployed over seas and there is a bobcat S130 here. Problem is the when you try and go forward and backward it will go maybe just a tad bit then bogs right out and dies.
My skid steer s770 stuck going forward to the right as soon as I turn it on. Seems like its stuck on one side . I unplugged the electric joysticks but still goes forward as soon as I turn it on. Any idea what it could be ? Im not getting any codes either . Ty in advance.
Great info. Ima cat dealer mechanic that works on larger stuff but I was trying to find a way to learn about the smaller stuff, and other brand stuff. This channel is a pleasant surprise.
I really appreciate the quality of your videos. They have gotten much better. I'm glad you worked it out with Bobcat To be able to make these videos.
Best guy to watch working on bobcat brand equipment on RUclips. Thank you sir!!
this is more entertaining than the playoffs thank you big dog!!!!!!
Thanks for your videos . They are always very informative . Looking forward to many . Keep up the great work .
I have learned much more with your videos, keep it up I would like a video of the Bics valves in the S250
On any hydrostatic pump.
The slippers have groves in them for lubrication purposes, can not be lapped, plus you need to check the end float in the piston and the slippers, if lots of movement in slippers can cause massive failures.
The lens plate can not be turned over it is one-sided only.
The hydraulic functions have their own hydraulic pump and system .
Hello from Turkey/Istanbul colleagues.
Nice job
gave me such knowledgeable information. really appreciate you guys. I was looking for some information on drive motor these guys filled me in with that data
Could this damage have been avoided if the machine was taken out of service at the first hint of a problem, or perhaps at the end of the day or the next day?
I just pulled a drive motor on a t650 yesterday. Brake seals blown out and pushing oil out of the of the hub seal.
Sir, I have questions about the Bobcat engine. I am a Bobcat driver. Please help me. The Bobcat engine is leaking oil. It is not from Lagog. Oil is coming out from under the engine..? Thank you
What if you don’t have any forward or any reverse? And if you use the stick it blinks the parking brake light at you.
Hello great videos,can you tell me what size the caps are for the brake lines? Thanks
Should you get steam coming of a drive motor when you drive in a puddle .. I’ve got low power on all drive and lift functions .. and bucket drops fast with a load in it
They get pretty warm after running for a while so steam after getting them wet driving through a puddle isn’t unusual.
question iwth an ASV MD70. when I try to move, motor starts stalling, that tells me pump is ok and motor is ok, right? now I can't find the break details on that motor to check. Can you help?
So I’m deployed over seas and there is a bobcat S130 here. Problem is the when you try and go forward and backward it will go maybe just a tad bit then bogs right out and dies.
Can you rotate the shaft of the drive motor to line up the mounting bolts?
what is a normal operating temp on a drive motor i just got a t550 thx
Great video. Thanks
My skid steer s770 stuck going forward to the right as soon as I turn it on. Seems like its stuck on one side . I unplugged the electric joysticks but still goes forward as soon as I turn it on. Any idea what it could be ? Im not getting any codes either . Ty in advance.
how do you remove the small line next to the hydraulic hoses
i got a bobcat t595 (tracks)that the parking brake is not engaging on the right side i still havent figured out why its not engaging
I liked it first
Yes you did, that was quick!
Great info. Ima cat dealer mechanic that works on larger stuff but I was trying to find a way to learn about the smaller stuff, and other brand stuff. This channel is a pleasant surprise.
30$ each….. for a clutch lamella 😂😂😂
Bobcat…. I wonder where You do hide all this profit in Your books!
Teach me please 🙏
Please french traduction