Pocket bike clutch and transmission replacement
HTML-код
- Опубликовано: 15 сен 2024
- Replacing the centrifugal clutch and missing transmission / transfer case on a Luyuan Inc. 40CC pocket bike. LY40MT-3
Qii lu Heavy Clutch， Heavy Duty Clutch For 33cc/43cc/49cc Mini Bicycle for Minimoto X 1 2 6 7 8 Scooter www.amazon.com...
Chanoc T8F 11 Tooth Sprocket Transmission Gearbox for 47cc 49cc Pocket Bike Dirt Bike Mini ATV Chopper www.amazon.com...
Thanks So Much for the Rope Trick!!! I use to use Needle Nose Vise Grips and clamp them onto the clutch and hold them while unscrewing the bolts which was hard to do to keep the engine from turning but the Rope Trick makes it Breeze Now! Thanks Again!!!!!
For future reference an impact driver can remove and tighten the clutch bolts much easier than forcing rope into the head
Hey I was wondering if you had any motor issues? And would you happen to know any place that ships 40cc 4-stroke complete motor to Hawaii?
We haven't had any issues. Doesn't get a lot of use but it always starts right up after sitting for awhile. Sorry... if you can't get it shipped from Amazon, I have no idea. lol
Nice video 😊😉 thanks for The uploade 🇩🇰
Thank you. Hope it was helpful.
Hey i was wondering if you remember the torque specs on the clutch pad replacement?? Thanks for your time..
@@kevinrichards3061 sorry. no idea. Just stopped when I thought it was tight enough.
Hey I really appreciated this video. Could you do a video of the the backtire and does you chain rub the frame?
My chain does not run the frame but it is kinda close. I don’t have anything on the back tire.
I have a four wheeler in my chain rubs at the frame
So I have a four wheeler same exact set up but when I go to pool started, it’s wanting to go forward when I took it apart. The spring was broke on the clutch so I bought a whole new clutch with spring. Do you think that’s gonna fix the problem?
I think you're on the right track. If the spring was broken, your clutch plates have nothing holding them back and will make contact with the transmission housing because of the centrifugal force created when you pulled the rope. I would expect a new clutch and spring to get you running again. Good luck.
Hey I have an issue back tire keeps moving when I turn on how do I fix? It’s like I’m accelerating.
Either your engine is idling way too high or your clutch springs are worn/broken. Not enough tension to pull the clutch pads back in.
Yea thays what happened to mine, my ckutch spring was broken, but you might be idling to high
Hey I have a pocket bike the Piston went on my first motor brand new so I just got a new motor and that front small sprocket that you're talking about is like locked up so can you come at me back let me know if it's the clutch should I pull off something off the old motor put it on there should I take something apart just let me know
If you’re talking about the small sprocket on the transmission not moving, I would open it up and see if your chain locked up.
Can I use any 49 cc clutch or those it have to be the same one
I have a feeling if the clutch looks like the one you are trying to replace, it’s probably ok to use.
Is it a luyuan
@@davidsb6324 OP didn't answer, but his is definitely a Luyuan
Thank you sir
Whats the pull start look like??
www.monsterscooterparts.com/catalog/product/view/id/36141/s/pull-start-for-40cc-4-stroke-fitright-mini-bike/?gclid=Cj0KCQjw7MGJBhD-ARIsAMZ0eeuiOF4BaOUJOj0wlUMHMubLNOCwCskeDA3WW-KolYGdVa4uanSGSasaAsfLEALw_wcB
This appears to be the same style pull start that is on our pocket bike.
@@PromisKeeper thank you so much man
Where can I buy a spring like that?