I can't see in the video which pins you connected to. I looked at my old battery and it appears that the first pin is + and the third pin is -. Are those the only 2 pins you are connecting to? As for voltage, the battery says it is 3.85v with a 4.4v charge. What voltage are you using? Do you know how much current the phone draws max? What I'm thinking of doing is using a regular 5v adapter and putting a diode on the end to drop the voltage to 4.3v, which is hope gets me in the correct range. I'm concerned it will draw too much current for my diode and so I'd like to figure out how much current we are talking so I can get a property rated diode.
@Pinoy Wonderman somehow i cant figure this out...you connected + to + and - to 2 pins? im trying to power a samsung galaxy J3 without battery. i connected just the + to + and - to - and it works but keeps shutting off randomly...Thanks for the video
I reccomend adding the thermistor (thermal resistor) on the middle pin (near positive and negative) the first thermistor pin is on the middle, the second pin is on power negative
@Amo Onggoy you said: "Try connecting + to + and - to 2 pins let's see if it works on your phone." I tried what you said but unfortunately it didn't work. the phone didn't even turn on.
It hqppens cuz the adapter output at more voltage like 5v but phones only require 4v at max. So the phone detects the overvoltage and then shuts off yo protect the board inside the phone
@@aysharidha8804 is it really the case tho? my old lenovo worked off charger no problem and after 2 minutes after booting to OS shut off probably because of 1amp charger
I want to do this for my Core Prime. Because I need it for secondary purposes at home. It's not clear what you're doing in the video. Is it possible for you to explain in writing please?
Try first positive wire from your power source to positive terminal of your phone the same to negative. Make sure you use correct voltage on your adaptor.
I'm using my redmi 6a without battery..my redmi 6a using plug-in battery clip ..not like this Samsung battery.. I've to break open my broken battery and use the clip to connect to my phone charger... when I on my phone the power just 84% but... when the power left 4% it will not drop after that and it will stay 4% and will not died till i turn it off...I'm so happy 😁 now I can use my phone 24/7 without charging it.. Sorry bad English 😁
I made a 4.2 volt adapter today, I measured it, and it provides exactly 4.2 volts. I tried it on my old samsung core prime and it worked for about 30 seconds and then it turned off. I guess it won't work without the battery chip. Where I am I found a few grand 2 for sale at very cheap price. Is it possible for me to learn the model name of your grand 2?
i've tested a 5v volt output charger to turn on my phone but it keeps shutting off et don't want to start , i think you have to use a charger with 4.2v output i guess
What if the Battery connector holder is broken can you still power the phone if you solder the red and black wires into the empty 3 terminals places of the broken battery holder in the motherboard ?
sumsung s 4..... Don't know if u use same phone on ur video.....actually I was wanting to use my phone as wifi camera on balconi... But I failed to make zoom... They ask money for that.... I learned to connect two phones wirlessly...one phone put on balconi... & other phone watch what it view...
@@fadifado6120 if your phone has no + and - written on the battery terminal then you have to use multimeter to know the positive and negative terminal.
I think you can do that also but it needs an adaptor with the right voltage, if you want to plug it in your usb computer you need to let it run all the time but wasting electricity. I hope I answer your question correctly. Thanks.
What i did is connecting + terminal to + on the adapter and negative and common terminal to negative on the adapter and it works. Make sure you are using right voltage.
Safe if you use the required voltage. More safer than plugging it in with battery, because there's a chance battery will overheat and explode. I'm doing this because I make my old celfon as an online security camera.
I can't see in the video which pins you connected to. I looked at my old battery and it appears that the first pin is + and the third pin is -. Are those the only 2 pins you are connecting to? As for voltage, the battery says it is 3.85v with a 4.4v charge. What voltage are you using? Do you know how much current the phone draws max? What I'm thinking of doing is using a regular 5v adapter and putting a diode on the end to drop the voltage to 4.3v, which is hope gets me in the correct range. I'm concerned it will draw too much current for my diode and so I'd like to figure out how much current we are talking so I can get a property rated diode.
@Pinoy Wonderman somehow i cant figure this out...you connected + to + and - to 2 pins? im trying to power a samsung galaxy J3 without battery. i connected just the + to + and - to - and it works but keeps shutting off randomly...Thanks for the video
Thanks for the video!! It helped power on an old phone i had and i recovered some important photos... you are amazing
Hello, will it work if I connect 5v without battery?
WOW! Super helpful! Thanks So Much!
I reccomend adding the thermistor (thermal resistor) on the middle pin (near positive and negative) the first thermistor pin is on the middle, the second pin is on power negative
Thank you for sharing works great.
Trebuie o rezistență de 10k , la pin neutru și minus ,?
Your presentation is not clear -- you seem hesitant and confused THROUGHOUT the video.
My mistake, I took the video but did not figured it out yet how to make it work and lazy to edit the video b4 uploading to RUclips.
@@pinoywonderman6466 Thanks for responding and that too in a positive manner. I am sure you will do a better job next time. Good luck and good wishes.
@Amo Onggoy you said: "Try connecting + to + and - to 2 pins let's see if it works on your phone." I tried what you said but unfortunately it didn't work. the phone didn't even turn on.
How much voltage and wh on your charger (mine is also ss g2 so i wanna try too)
5.1V, 0.7amps and it works...
Thanks for showing this. Mine only boots to logo then turns off. I don't think my chargers have enough power.
It hqppens cuz the adapter output at more voltage like 5v but phones only require 4v at max. So the phone detects the overvoltage and then shuts off yo protect the board inside the phone
@@aysharidha8804 is it really the case tho? my old lenovo worked off charger no problem and after 2 minutes after booting to OS shut off probably because of 1amp charger
@@aysharidha8804 okay nvm my lenovo worked off usb not battery pins
I want to do this for my Core Prime. Because I need it for secondary purposes at home. It's not clear what you're doing in the video. Is it possible for you to explain in writing please?
Try first positive wire from your power source to positive terminal of your phone the same to negative. Make sure you use correct voltage on your adaptor.
I'm using my redmi 6a without battery..my redmi 6a using plug-in battery clip ..not like this Samsung battery.. I've to break open my broken battery and use the clip to connect to my phone charger... when I on my phone the power just 84% but... when the power left 4% it will not drop after that and it will stay 4% and will not died till i turn it off...I'm so happy 😁 now I can use my phone 24/7 without charging it..
Sorry bad English 😁
Hi, i have xperia z2 and it has flex cable for battery connection, is there anyway I can do this?
If you are able to determine the positive and negative terminal... but to be honest that's very hard.
I made a 4.2 volt adapter today, I measured it, and it provides exactly 4.2 volts. I tried it on my old samsung core prime and it worked for about 30 seconds and then it turned off. I guess it won't work without the battery chip. Where I am I found a few grand 2 for sale at very cheap price. Is it possible for me to learn the model name of your grand 2?
Try connecting + to + and - to 2 pins let's see if it works on your phone.
phone can no problem work with 5 volts and you need minimum 2amp power supply for it to work
Nice video
i've tested a 5v volt output charger to turn on my phone but it keeps shutting off et don't want to start
, i think you have to use a charger with 4.2v output i guess
Try finding a 4.2v charger.
Bhiya is pin ka kya naam he
What is the model name of your grand 2?
SM-G7102
What if the Battery connector holder is broken can you still power the phone if you solder the red and black wires into the empty 3 terminals places of the broken battery holder in the motherboard ?
I think you need a new phone. Mine has half the screen working.
Will it work on samsung grand neo plus please REPLY
I think it will work, as long you connect it correctly and try to use 4v adapter.
Hello bhai lava phone me hota hai ese
Nice
Thabk you for this video i solve my battery 👏👏👏
Just gave you 800 likes
How connect direct chargar wires to samsung old mob. GT S 7562 ?
Just follow my video how to connect
so when it gets SUPER hot, it shuts off immediately
5v yung output ng charger bro?
Pwede yun direct?
Dba output ng battery is 4.2v lang?
It works bro.
Will it work on Samsung Z2?
I think it works to all removable batteries, just connect it to right terminal and right voltage/amps.
Show me what happened between 4:20 to 4:26 in the video time
Negative to conector #1&2 and positrive to conector #4??
just follow where your battery + - sign is...
Pinoy Wonderman already did it, thanks!
Why you have the mirrored screen?
What is mirrored screen?
@@amoonggoy8794 watch precisely when the screen turns on.You will see all the letters mirrored.
The video is mirrored. Watch the "samsung" logo under the speaker 5:18
He probably ripped off this video from someone else and doesn't want to be found out.
@@asdqqweq You can not do that in RUclips that's a copyright violation.
Sir mera phone ka pin lock me bhool gya hu plese lock todne m meri madad kare
What about samsung 4
I think it will work in all phones with removable batteries.
Can we use 12w charge
I think so, as long the voltage is 4.2 I think you are fine.
Hi.. I was searching on this idea.. But how can I know positive & negative inside phone?
what kind of phone do you have?
sumsung s 4..... Don't know if u use same phone on ur video.....actually I was wanting to use my phone as wifi camera on balconi... But I failed to make zoom... They ask money for that.... I learned to connect two phones wirlessly...one phone put on balconi... & other phone watch what it view...
@@fadifado6120 if your phone has no + and - written on the battery terminal then you have to use multimeter to know the positive and negative terminal.
thank u...
The Battery shows + AND negative ...use that as reference
I don't get it. You can't simply power it with USB power plugged in? If so, why does it not work? (Without battery)
Why not to plug it normally to USB and shorten the pins?
I think you can do that also but it needs an adaptor with the right voltage, if you want to plug it in your usb computer you need to let it run all the time but wasting electricity. I hope I answer your question correctly. Thanks.
How to jump start a phone.
will the dislikers care to share their opinion?
unspecified only listening music 😂🎶🎶
Ilang oras pwd tatagal yan boss
Mine stays on, unless I turn it off.
What is the pin name
I think it is crocodile pin.
main: ruclips.net/video/lDbPQGjxxRA/видео.htmllc=Ugyhon7Q4XDS7HZXHxh4AaABAg.9EkqGFC70jw9F28RYCkZK8
Bhai phone bhut grm ho jata h ese krne pr
Is there any risk
I don't think so...
અમને આવડે છે
no clear your VIDEO ..
please give me solution .
What i did is connecting + terminal to + on the adapter and negative and common terminal to negative on the adapter and it works. Make sure you are using right voltage.
@@pinoywonderman6466 thank you for the rply. I will be try this solution
I cant see pls help😭🙏
Pause the video if you can not clearly see it.
Is it safe...
Safe if you use the required voltage. More safer than plugging it in with battery, because there's a chance battery will overheat and explode. I'm doing this because I make my old celfon as an online security camera.
Matlab
@@pinoywonderman6466 how much voltage does it require?
@@3boodAl7asan I use 5.1V, 0.7amps and it works...
@@pinoywonderman6466 late the phone exploded i gave it 12v
2022
Will it work if i just use the charger wires without using those... well i don't know what i should call them 😂?
I think so...
Crocodile pin
Crocodile clips
It's impossible 😂
Nothing is impossible if you have faith... 🤪
😂😂
I tried this my house caught on fire. 🔥. Will just buy a new phone.
not funny