Видео

Whats the name of tge yellow and white wire w clamps called?

I tried it with a diode in Series While booting, the phone drew about an Amp. USB+ to Diode(>|) toPhone Pin 1 (+). USB- to Phone Pin 3 (-). This kind of worked. The phone works (and shows full battery) but the diode gets really hot (1A*0.7V = 700mW, which is a lot for a small THT diode), but it sometimes crashes. Improvements: To fix the crashing and lower the needed Amperage of the charger I would connect a beefy (100uF 6.3V) Electrolytic capacitor between the phones plus and minus. Maybe its fine to not use the diode. Otherwise I would use a TO-220 diode, and glue it into the battery compartment using thermal grease /glue. As it's made out of metal, it should dissipate the power well enough (The Idea is to re-use the phone with its nice AMOLED panel as a home assistant wall mounted panel)

I also try he is working

ماداسمه هدا ااشرجار

❤ Now I can start my phone 😊

Hello, will it work if I connect 5v without battery?

It's impossible 😂

How connect direct chargar wires to samsung old mob. GT S 7562 ?

I cant see pls help😭🙏

How to jump start a phone.

Show me what happened between 4:20 to 4:26 in the video time

Thanks for the video!! It helped power on an old phone i had and i recovered some important photos... you are amazing

so when it gets SUPER hot, it shuts off immediately

I reccomend adding the thermistor (thermal resistor) on the middle pin (near positive and negative) the first thermistor pin is on the middle, the second pin is on power negative

😂😂

I can't see in the video which pins you connected to. I looked at my old battery and it appears that the first pin is + and the third pin is -. Are those the only 2 pins you are connecting to? As for voltage, the battery says it is 3.85v with a 4.4v charge. What voltage are you using? Do you know how much current the phone draws max? What I'm thinking of doing is using a regular 5v adapter and putting a diode on the end to drop the voltage to 4.3v, which is hope gets me in the correct range. I'm concerned it will draw too much current for my diode and so I'd like to figure out how much current we are talking so I can get a property rated diode.

Just gave you 800 likes

What is the model name of your grand 2?

Trebuie o rezistență de 10k , la pin neutru și minus ,?

Sir mera phone ka pin lock me bhool gya hu plese lock todne m meri madad kare

unspecified only listening music 😂🎶🎶

@Amo Onggoy you said: "Try connecting + to + and - to 2 pins let's see if it works on your phone." I tried what you said but unfortunately it didn't work. the phone didn't even turn on.

I made a 4.2 volt adapter today, I measured it, and it provides exactly 4.2 volts. I tried it on my old samsung core prime and it worked for about 30 seconds and then it turned off. I guess it won't work without the battery chip. Where I am I found a few grand 2 for sale at very cheap price. Is it possible for me to learn the model name of your grand 2?

I want to do this for my Core Prime. Because I need it for secondary purposes at home. It's not clear what you're doing in the video. Is it possible for you to explain in writing please?

Bhai phone bhut grm ho jata h ese krne pr

I tried this my house caught on fire. 🔥. Will just buy a new phone.

Can we use 12w charge

Nice

Your presentation is not clear -- you seem hesitant and confused THROUGHOUT the video.

2022

i've tested a 5v volt output charger to turn on my phone but it keeps shutting off et don't want to start , i think you have to use a charger with 4.2v output i guess

What is the pin name

I don't get it. You can't simply power it with USB power plugged in? If so, why does it not work? (Without battery)

no clear your VIDEO .. please give me solution .

Why not to plug it normally to USB and shorten the pins?

main: ruclips.net/video/lDbPQGjxxRA/видео.htmllc=Ugyhon7Q4XDS7HZXHxh4AaABAg.9EkqGFC70jw9F28RYCkZK8

main point: ruclips.net/video/lDbPQGjxxRA/видео.htmllc=Ugyhon7Q4XDS7HZXHxh4AaABAg.9EkqGFC70jw9F28RYCkZK8

will the dislikers care to share their opinion?

Thank you for sharing works great.

Ilang oras pwd tatagal yan boss

@Pinoy Wonderman somehow i cant figure this out...you connected + to + and - to 2 pins? im trying to power a samsung galaxy J3 without battery. i connected just the + to + and - to - and it works but keeps shutting off randomly...Thanks for the video

5v yung output ng charger bro? Pwede yun direct? Dba output ng battery is 4.2v lang?

WOW! Super helpful! Thanks So Much!

Let's support each other

Thabk you for this video i solve my battery 👏👏👏

Will it work if i just use the charger wires without using those... well i don't know what i should call them 😂?

Is there any risk

અમને આવડે છે

you look like you have parkinson's. i am praying for you

Will it work on Samsung Z2?