Great job. This is better than 90% of pointing work out there. I'm a roofer, and I'm so sick of all the negativity and useless criticism in this industry. Thats why I work alone, with my own business.
Fellow tiler here from NZ. Decent finish mate not bad at all. Still blows my mind you guys need water over there to get a smooth finish. Must be the heat huh
If the same exact tile roof is at an elevation that receives a foot of snow on the roof during the winter time would you still recommend having weep holes on the ridge or would that be a water entry point for a roof with sitting snow on it?
In Australia only mate You can buy it at Bunnings Warehouse, mate. Selleys Point Work Advanced Formula Terracotta Colour. Dunlop 10L Roof Pointing Terracotta.
In my rented house I can see 2 thin lines of daylight both sides of these ridge tiles all along the roof and the loft is damp. Is it normal to see daylight next to the ridge tiles or has the cement disappeared?
If you can see sky in a direct line looking up, you have a problem - rain can definitely get in. There should however be weep holes (you can see these guys install them when re-pointing) which can let daylight in through holes. You have to determine which is the cause in your place. Best to get on roof and check if you can - if not possible flying a drone is useful and half the neighbourhood kids have them lol.
Beautiful work mate. I work on roofs everyday doing solar and roof maintenance (gutter cleaning, panels cleaning, solar bird proofing and minor roof repairs), don’t do much repointing at all but work around it and make small repairs sometimes. I would say the way you guys do it is only some by about 10% of roofers. So many roofs I work on are peeling from the top already when the pointing looks almost new. You can see underneath that the new stuff that the customer payed $3500 to get done is only 2mm thick with zero prep. It’s criminal. I guess that’s not surprising when anybody Is allowed to do it with no qualification or experience. As long as they don’t charge the customer more than $5000 per job they could be hiring a guy who has never stepped foot on a roof before. I saw that once haha. We hired a guy to fix a few broken tiles under the ridge and repoint and when he got up the first story roof he froze. Couldn’t climb the 8 foot ladder up to the second story. I had to go. Up and down it for him while he passed me stuff. This guy had a full van with all roofing and maintenance tools and long ladders and everything. Very odd. With the high demand for roofers these days many companies are saying no to a all jobs m, leaving a gap in the market which will be filled by unqualified guys with no experience. It’s just too much money to pass by if one is open to ripping off their customers and that’s a large proportion of tradies as you know. Luckily there are still plenty of customers who are willing to pair a fair price for good work. They way you guys do it may well actually save the customers money in the long run even if you are charging more than double.
thats not entirely true if the roof is 5k it requires a licensed personnel with anything over 3.3k past the handy man pricing so must have qualifications for it... its just that people don't check for tradies qualifications often, or fear of offending the tradie which i'm always happy to show
The day after Ridge caps have been Bedded or re/bedded you can lift the caps off with your finger tips. It doesn't hold the caps it is more a bed for them to sit on before the top coat is applied
@@jacobblack7841 lol that’s a hilarious response, I don’t know what sand cement ratio you use but you definitely shouldn’t be able to lift the ridge caps with your finger tips a day after bedding them in, to say they’re only bonded by the Flexi is an absolute joke, the ridges are BEDDED into the cement mix and should remain bonded for at least 20 years if the correct sand cement ratio is used
The water travels down the back of the bedding mortar and goes into a water course of the next adjoining tile on hips. Only the very to rodgecap of a hip is weepholed
Good to see quality tradesman doing a thorough job. There's too much laziness and greed creating poor service and results in all trades. Keep up the good work and all the best.
Very Neat , you have a lot of paperwork over there ,here in blighty roofers just show up and get on with it no question asked. Obviously complying with health and safety ie correct ladders ect
This is how cowboys point ridges in the UK and is classed as a very poor job.. need to take the old bed out or at least take the mortar back more to give the new mix more thickness and more to space to grip under the tile.. pointing is becoming less now anyway due to dry ridge systems which are far better
@@ETH85 I could understand that trying to repoint butted tiles would be considered lazy. I've never seen lapped ones supposedly from Britain before. I've also never seen a dry ridge system that I'm confident would stop wind blowing water up under the tiles and over the end of the half length tiles at the peak of my roof. The whole "tape is an adequate modern substitute for good building design of the past" also doesn't sit well with me either, if it weren't for those I'd ditch the mortar and go dry ridge too. Do you guys use flexible pointing? I could understand it being deemed not necessary with the relatively stationary ground you guys have up there.
No you idiot, re laying ridges and repointing are seperate jobs. Your rhinking about relaying when you can just as easily repoint them and does the same job
I can see you take pride in your work nice job the problem with roofers too many cowboys out there they just want to make as much money as they can ?? you can't see what they're doing when they're up there no I don't trust a lot of Roofer's because of this ??
My dad will be doing his roof today thanks for the handy tips mate. You can buy it at Bunnings Warehouse, mate. Selleys Point Work Advanced Formula Terracotta Colour. And Dunlop 10L Roof Pointing Terracotta Colour for $45 dollars 😁
Roof repointing is causing more harm than good. Rain water would back up into the interior should the cracks after some years. My 45 years-old roof does not have any pointing cement and there is no leak ever. Repainting the roof should be good enough to make it last longer, maybe 10 to 20 more years.
Licensed Roof Tiler here. Repointing is an important part of Roof maintenance. Flexible cement holds the ridgecaps and cut tiles in place and prevents ridges shifting or blowing off in heavy storms. Also, a 45 year old roof is not an old roof and you will likely end up with long term issues such a ridges slowly and making gaps. Aussie roofs come under fierce heat and flexible cement moves with the tiles as they expand when they get hotter Also, REPAINTING a roof does nothing to improve the roof or increase its lifespan, its 2 coats of paint, so it's purely cosmetic. No problem with that, but painting won't stop your ridgecaps blowing off the roof in a heavy storm, correctly applied roof pointing will.
I only grind if the cap is rough or if obviously the old pointing is wild. Just a pressure clean with a little electric cleaner suffices for prep
Great job. This is better than 90% of pointing work out there. I'm a roofer, and I'm so sick of all the negativity and useless criticism in this industry. Thats why I work alone, with my own business.
@@jyeeeee I’ve been a roofer for 20 years bro most of us are just absolute gronks 😂
fantastic work, grinding the edge of the tile is great, reduces the ripple effect when laying off the pointing
Hi, what’s the ballpark figure for repointing and repainting a single storey house?
What type of mortar did you use?
Fellow tiler here from NZ. Decent finish mate not bad at all. Still blows my mind you guys need water over there to get a smooth finish. Must be the heat huh
Very helpful, may I know if we have to wheel the holes every repointing or only the top part
What grinding disc did you use? Diamond grinding cup?
If the same exact tile roof is at an elevation that receives a foot of snow on the roof during the winter time would you still recommend having weep holes on the ridge or would that be a water entry point for a roof with sitting snow on it?
What is a good product to repoint the ridge cap. Thank you
silicon
What brand of pointing was used? I'm interested to inow what the terracotta coloured pointing brand is and where to source it.
In Australia only mate You can buy it at Bunnings Warehouse, mate. Selleys Point Work Advanced Formula Terracotta Colour.
Dunlop 10L Roof Pointing Terracotta.
In my rented house I can see 2 thin lines of daylight both sides of these ridge tiles all along the roof and the loft is damp. Is it normal to see daylight next to the ridge tiles or has the cement disappeared?
If you can see sky in a direct line looking up, you have a problem - rain can definitely get in. There should however be weep holes (you can see these guys install them when re-pointing) which can let daylight in through holes. You have to determine which is the cause in your place. Best to get on roof and check if you can - if not possible flying a drone is useful and half the neighbourhood kids have them lol.
Since hes not answering any questions. Could someone tell me the name of the product to buy in home depot s.Fla?
There is something really satisfying about watching this
Any tips for making your pointing look good? Have trouble with mess and inconsistency’s it doesn’t look dead straight
Very professional. Thank you for the insight.
Beautiful work mate.
I work on roofs everyday doing solar and roof maintenance (gutter cleaning, panels cleaning, solar bird proofing and minor roof repairs), don’t do much repointing at all but work around it and make small repairs sometimes.
I would say the way you guys do it is only some by about 10% of roofers.
So many roofs I work on are peeling from the top already when the pointing looks almost new.
You can see underneath that the new stuff that the customer payed $3500 to get done is only 2mm thick with zero prep.
It’s criminal.
I guess that’s not surprising when anybody Is allowed to do it with no qualification or experience.
As long as they don’t charge the customer more than $5000 per job they could be hiring a guy who has never stepped foot on a roof before. I saw that once haha. We hired a guy to fix a few broken tiles under the ridge and repoint and when he got up the first story roof he froze. Couldn’t climb the 8 foot ladder up to the second story. I had to go. Up and down it for him while he passed me stuff.
This guy had a full van with all roofing and maintenance tools and long ladders and everything.
Very odd.
With the high demand for roofers these days many companies are saying no to a all jobs m, leaving a gap in the market which will be filled by unqualified guys with no experience. It’s just too much money to pass by if one is open to ripping off their customers and that’s a large proportion of tradies as you know.
Luckily there are still plenty of customers who are willing to pair a fair price for good work.
They way you guys do it may well actually save the customers money in the long run even if you are charging more than double.
thats not entirely true if the roof is 5k it requires a licensed personnel with anything over 3.3k past the handy man pricing so must have qualifications for it... its just that people don't check for tradies qualifications often, or fear of offending the tradie which i'm always happy to show
Doe the repointing have to be this smooth ? Had a guy done my roof today but it’s not as smooth as this
Why not just re-bed and point? You could see the ridges were no longer bonded to the original mortar it would last a lot longer
if the ridges arent moving I understand just repointing, but yea if it's pretty solid may as well just repoint it 👍🏼
Lol yeah you can clearly say mortar does not hold ridges anymore I bet you just pull it all.
This pointing will last for 6 months
The day after Ridge caps have been Bedded or re/bedded you can lift the caps off with your finger tips. It doesn't hold the caps it is more a bed for them to sit on before the top coat is applied
@@jacobblack7841 lol that’s a hilarious response, I don’t know what sand cement ratio you use but you definitely shouldn’t be able to lift the ridge caps with your finger tips a day after bedding them in, to say they’re only bonded by the Flexi is an absolute joke, the ridges are BEDDED into the cement mix and should remain bonded for at least 20 years if the correct sand cement ratio is used
@@coastwidek9132 Otherwise you will be picking them up from the neighbours yard on a windy day
Can I have a quote on my roof for a repoint/Rebed on gables
What size trowel do you recommend for repointing ridges
Do you create weep holes on the side ridges or only on the top (the ridges stay parallel to the ground)? I didn't see weep holes on the side ridges
The water travels down the back of the bedding mortar and goes into a water course of the next adjoining tile on hips. Only the very to rodgecap of a hip is weepholed
Good to see quality tradesman doing a thorough job. There's too much laziness and greed creating poor service and results in all trades. Keep up the good work and all the best.
I find its the client always wanting cheap then moaning when they get crap
Wow people who’s not a clue praising a shit job
Wouldn’t you power wash the roof before doing anything else.Some of that pointing is being troweled over dirty tiles.
@@Hahehhwgajshah72726..that’s why you do grinding
Where are you based at? I need you to do a job for me. Thanks.
Whats the weephole tool called
Very Neat , you have a lot of paperwork over there ,here in blighty roofers just show up and get on with it no question asked. Obviously complying with health and safety ie correct ladders ect
Cheers buddy, time for my first repoint
This is how cowboys point ridges in the UK and is classed as a very poor job.. need to take the old bed out or at least take the mortar back more to give the new mix more thickness and more to space to grip under the tile.. pointing is becoming less now anyway due to dry ridge systems which are far better
are ridge and hip tiles in the UK lapped or butted together?
@@daeyvidd depends on the style of the tiles.. some butt up and some overlap
@@ETH85 I could understand that trying to repoint butted tiles would be considered lazy. I've never seen lapped ones supposedly from Britain before. I've also never seen a dry ridge system that I'm confident would stop wind blowing water up under the tiles and over the end of the half length tiles at the peak of my roof. The whole "tape is an adequate modern substitute for good building design of the past" also doesn't sit well with me either, if it weren't for those I'd ditch the mortar and go dry ridge too. Do you guys use flexible pointing? I could understand it being deemed not necessary with the relatively stationary ground you guys have up there.
No you idiot, re laying ridges and repointing are seperate jobs. Your rhinking about relaying when you can just as easily repoint them and does the same job
my back would last about 10 minutes..good job
the verb grinded is rare, more correct and better to use the verb ground - "once the old mortar has been ground back,...'
Notifying neighbours of dust that won’t even affect them got to love our ohs laws lol
my crew never does ihaha
Yes, but WHAT mix did you apply..?!
What is the product and what is the composition..?!
You can buy it at Bunnings Warehouse, mate. Selleys Point Work Advanced Formula Terracotta Colour.
Dunlop 10L Roof Pointing Terracotta.
Looks like a bodge job lift and bed 3to 1 sand cement
Great video thank you
Should I do this myself?
it's old world craft. it carries on.
ridge lodge is the crevice.
the housing to the hidden hand.
Resetting would bee the best , probably quicker too.
What a load of bollicks
Hi where are you located
how to do thumb up 10x？
Great video, thanks!!
Well done video, good voice over.
Set a good standard for tile roofers
When do you know its time to re bed?.
I don’t understand it, why don’t you re-bed them 🤔
Harcın adı nedir
Why not just relay, less hassle?
Whats best way to get rid of old pointing ?
well done
Outstanding
Very informative
Love how you said grinded the tiles , ya Wally!
I can see you take pride in your work nice job the problem with roofers too many cowboys out there they just want to make as much money as they can ?? you can't see what they're doing when they're up there no I don't trust a lot of Roofer's because of this ??
2:39 see the spray bottle. what is he doing with that ?
Spray the trowel with water when pointing and it makes it smoother 👍
My dad will be doing his roof today thanks for the handy tips mate.
You can buy it at Bunnings Warehouse, mate. Selleys Point Work Advanced Formula Terracotta Colour.
And Dunlop 10L Roof Pointing Terracotta Colour for $45 dollars 😁
Good quality skill
looks good
Completely a waste of time, the ridgers should be Completely lifted off and re-bedded
Waterblast it clean before pointing
best in the bussiness
Wasting your time., rebed or leave it
You have no idea hahahaha
You could’ve matched a color a little little bit better
Roof repointing is causing more harm than good. Rain water would back up into the interior should the cracks after some years. My 45 years-old roof does not have any pointing cement and there is no leak ever. Repainting the roof should be good enough to make it last longer, maybe 10 to 20 more years.
Licensed Roof Tiler here.
Repointing is an important part of Roof maintenance. Flexible cement holds the ridgecaps and cut tiles in place and prevents ridges shifting or blowing off in heavy storms.
Also, a 45 year old roof is not an old roof and you will likely end up with long term issues such a ridges slowly and making gaps.
Aussie roofs come under fierce heat and flexible cement moves with the tiles as they expand when they get hotter
Also, REPAINTING a roof does nothing to improve the roof or increase its lifespan, its 2 coats of paint, so it's purely cosmetic. No problem with that, but painting won't stop your ridgecaps blowing off the roof in a heavy storm, correctly applied roof pointing will.
Push n point for life
You need to re-bed it, most of the ridges are loose and your only pointing over them
Pressure wash the ridges
@@briansteele4427 client probably didn't want a roof wash just a repoint? Dumbass
@@floydgraveling3256 has it occurred to you how stupid your comment is yet ?
I'd use compressed air to clean the old joint.
Roof repointing diy
Weep holes could have been neater, shame you lowered your standards
BEST IN INDURISTY
Just re-bed em ffs really bad work just repointing, first frost back to the way it was.
Man all that ,u should have just rebedded the whole thing ,ps I did tiling for 10 years
So u should get rid of all old pointing ??
Re-pointing is cowboyish a bodged job 👎🏽
Rough as guts pointing and no safety rails installed around roof edges.
They are wearing harnesses mate. Did you watch the video ?
Didn’t even need doing.
All.that loose pointing your showing us is the same stuff you put on the pervious year 🤣
Repointing means taking out mortar and repoint it