That’s actually the reason he didn’t get to run it very many places in that configuration. Most the tracks he took it to told him to put it back in the trailer that death trap ain’t running here
@@highpsiguy4085 the real question becomes: What if the car gets pinned up against the driver side wall? There is no other way out and ask Mike Murillo what is like to not be able to get out of a burning car within 20 seconds.That fan may keep him cool, but there is no way ANYONE is climbing over 2 turbos sitting at 1200 degrees next to you in the passenger side.
Nice so see the engine swaps going in the right direction. Pendulums swing and now I'm seeing FORD small blocks in GM chassis! LOVE IT! So sick of seeing LS and Cummins swapped into everything. There are soooo many amazing engines available but nothing but copycats in the car culture.
@@KingChadKennedy lol, calm down purist, a real car enthusiast simply enjoy the work and effort put into those machines. Swaps aren't something you do in a day, you know?
@@RGV2300 not at all true. I applaud anyone who takes a drivetrain from one manufacturer, and shoves it into the body of another manufacturers car. But I completely agree that LS and 2jz swaps are boring. Old. We get it, you can get a junkyard LS and make 500 hp. Whoop de doo. Now, as much as I am NOT a fan of it, the guy who shoved I believe a 6bt into a mustang is awesome. THAT is something impressive
For those wondering , Fabian bell built the car . 800 Cubic inch twin 98s I think, about 4000hp. I remember reading about it last year , no clue what it ran tho.
I remember seeing this car few years ago on RUclips, I'd be a little nervous about having a Serious Turbo Failure, Those Shafts and Wheels are spinning at some insane rpm,s, If shrapnel gets through the housing, it's right in the Driver's Compartment. I would definitely look into some sort of Ballistic Type Shield, or Wrap, I'm not sure what would be best at containing a serious failure. If it was me, the Turbos wouldn't be sitting next to me.
the real question becomes: What if the car gets pinned up against the driver side wall? There is no other way out and ask Mike Murillo what is like to not be able to get out of a burning car within 20 seconds.That fan may keep him cool, but there is no way ANYONE is climbing over 2 turbos sitting at 1200 degrees next to you in the passenger side.
@@tripprogers4814 You are correct, i didn't think about that, there ain't no way your getting out of that Passenger Side door with those Turbos and Piping blocking the Exit. It looks to be a very Unsafe Set-Up.
This is the worst idea I've seen in a long time. These turbos are known for exploding through the comp housing- Garrett is the only brand that's put serious RnD into containment and guarantee that any failures will be contained within the housing. They run them until failure on a test rig and inspect for damage and redesign as necessary... The number of race cars I've seen destroyed by turbo failures (usually shit hits the fan when shrapnel penetrates the fuel tank or fuel lines). I agree, I wouldn't want to be sitting next to those Precision turbos (one of the most common to fail at this end of motorsport). As for the climbing over the hot turbos if the car gets stuck up against the driver's door on the wall- that gotta be one of the NHRA's issues with it. I bet they weren't happy about the risk to the driver if one were to fail either... On another note, you'd think the hot pipes would damage the plexiglass screen in the rear... The heat wrap on the pipes will contain more heat (obviously) and shoot hotter exhaust out their ends because no heat is lost as the exhaust travels through the pipe... Wonder what plexiglass is rated to heat wise, that could cause a fire in itself
@@danielbrealey2924 I've always prefered Garrett Turbos over the rest of em. One of the reasons why is exactly what you said about Garrett,s R & D on there Turbos.
@@badass6.0powerstroke10 Yep, I agree. Only ever buy Garrett turbos for my cars as well... They last like an OEM quality part too, they are worth the money
Big Block Chevy with Hemi heads if memory is correct thats Fabian's car I know he did that last year is this a recent video or is this from last year....I would hate be in that car when one of those turbos come apart.
8500 lol That’s cute. Mf don’t much start making boost til about 10k lol twin 98s on a Hemi? That mf will Rev to 15k for sure lol the PC Hemi cars are shifting at over 12k in race trim
For all stating that turbos wont launch debris...read below or click on link below directly : I made the cylinderhead for this. 1th run it made 7500 rpm . 2th pull BOOM. This turbine wheel dug its way out of the hiusing and cut through 0,3" thick chromemoly. The go pro on 80 frames per second with a field view of 20 yards did not even catch a red stripe. The turbine wheel was luckiky shot into the roof of Ahoy. These run at 100k revs. Resulting in a blade tip speed of about 2000ft per second. Yup..you read that right. As the shielding will try to stop the wheel coming out the inconel turbine wheel will create about 500 hp to 750 hp of cutting force. As the inconel is self hardening when ' cold ' deformed...it doesnt get dull or soft. It keeps cutting. The speed of pièces this wheel was so high ...there werent almost any burrs around the edges of the hole in the hood. The Dutch Tractor Pull association has taken adequate measures to prevent this happening again. ruclips.net/video/WI0XWdfy6p0/видео.html
I love it and I hate it. No standard for safety there with turbos inside the car. Turbo explodes and fire and you are screwed. Not to mention flying shrapnel.
It was definitely a better idea in his head than it was in reality (or I would hope the hell someone wouldn’t put that kind of money into a idea that was that bad in there head also)
All these comments about “I wouldn’t want to sit next to those turbos”….. When was the last time you saw a turbo wheel come through a housing? Never. Be quiet.
@@austinsmith7750 I heard what he said that “it’s not too bad with the fan for clearing the smoke keeping him cool”. but Mike Murillo knows what it is like to be trapped in a car. What happens if he can’t open the driver side door because the car gets pinned up against the wall? Shawn Ellington would never build a car you could’t get out the passenger side of. Neither would Mile, Neither would Stevie Fast, Neither would Lyle Barnett, Neither would 99% of Drivers. I am sure that car won’t be able to pass tech inspection at a majority of events. There is no doubt that it is an awesome car. ..but dang.
Not trying to be the Debbie downer however, the problem is if you get into a wreck and pin the driver's side, it's highly restricted and dangerous to get you out. I do like the fact you think out of the box.
Come to JJs arm drop this weekend and find out and if you have a VIP tickets you can come to the weeny roast at JJs house on the river Qweeny is doing the cooking
Everything Murphy's law applies at the track too they are wrapped with a lot of heat shielding that might be enough to keep everything from flying around inside the car
Turbos must not blow up very much in a promod……. Because the diesel truck pulling world seems to blow them up every run and most of the time it explodes the entire front end off. Couldn’t even imagine the devastation to a driver if they seat next to a set of 98’s when they let go
Like I said in last comment I know he did that last year for JJs event but supposedly he took them out of the car afterwards so is this video recent or from last year.
It moves for sure. I'd constantly be waiting for the moment the oil line to give me a spritz or a boost pipe to ping off the helmet 🤣👌🏻
or compressor wheel exploding or turbine wheel...
How good are those ballistic blankets at stopping shrapnel if one of those turbos come apart?
o.0 those arent ballistic blankets from the looks of it, just looks like plain old heatsheilding
Those were just heat shielding but ballistic blankets won’t hold everything in to the extent needed for this situation either
Yeah those are definitely just heat blankets. If one of those turbos blows up that guys will be fucked
I don't think I've ever seen shrapnel come from the turbine side of a turbo, but a compressor wheel exploding wouldn't be much better.
@@highpsiguy4085 seen turbos blow up before. It actually happens to a gtr being tuned. Tuner packed up and left.
That's sick ..idk all about those turbos sitting beside you lol...but super badass
I guess if they aren't the Precision ones that require a safety blanket because they are death turbos maybe, but I'd say NOPE
Frag shield needed
That’s actually the reason he didn’t get to run it very many places in that configuration. Most the tracks he took it to told him to put it back in the trailer that death trap ain’t running here
@@rpturbo do precision turbos really require protection because they are known to grenade? Like is that a factual statement?
@@highpsiguy4085 the real question becomes: What if the car gets pinned up against the driver side wall? There is no other way out and ask Mike Murillo what is like to not be able to get out of a burning car within 20 seconds.That fan may keep him cool, but there is no way ANYONE is climbing over 2 turbos sitting at 1200 degrees next to you in the passenger side.
Super sketch! Should have been called the widow maker. Please put some shielding in between you and the potential grenades. Looks awesome btw
That thing is literally a killer☠️☠️☠️☠️
The heat in the cab alone must be insane
did you not watch the video mate?
Had the opportunity to spend a weekend with Fabian Bell. The guy is incredibly cool, a racers racer.
I'd like to see an in-car gopro of what it sounds like and looks like on a pass
I love the set up those turbos on the dash make the car look so cool
That looks like an older Sonny’s Hemi. Pretty wild piping for the turbo setup.
I was thinking the same, like what was in game over.
It is a Sunny's hemi headed engine And I believe it was 680 in³ somewhere in that area
Nice so see the engine swaps going in the right direction. Pendulums swing and now I'm seeing FORD small blocks in GM chassis! LOVE IT! So sick of seeing LS and Cummins swapped into everything. There are soooo many amazing engines available but nothing but copycats in the car culture.
lS motors are the literal kings of copycat motors everyone does LS swaps or 2jz swaps do you know how lame and boring that is
@@KingChadKennedy lol, calm down purist, a real car enthusiast simply enjoy the work and effort put into those machines. Swaps aren't something you do in a day, you know?
@@RGV2300 not at all true. I applaud anyone who takes a drivetrain from one manufacturer, and shoves it into the body of another manufacturers car. But I completely agree that LS and 2jz swaps are boring. Old. We get it, you can get a junkyard LS and make 500 hp. Whoop de doo.
Now, as much as I am NOT a fan of it, the guy who shoved I believe a 6bt into a mustang is awesome. THAT is something impressive
@@kushweedfaded how dare you
@@RGV2300 😆
For those wondering , Fabian bell built the car .
800 Cubic inch twin 98s I think, about 4000hp. I remember reading about it last year , no clue what it ran tho.
I remember seeing this car few years ago on RUclips, I'd be a little nervous about having a Serious Turbo Failure, Those Shafts and Wheels are spinning at some insane rpm,s, If shrapnel gets through the housing, it's right in the Driver's Compartment. I would definitely look into some sort of Ballistic Type Shield, or Wrap, I'm not sure what would be best at containing a serious failure. If it was me, the Turbos wouldn't be sitting next to me.
the real question becomes: What if the car gets pinned up against the driver side wall? There is no other way out and ask Mike Murillo what is like to not be able to get out of a burning car within 20 seconds.That fan may keep him cool, but there is no way ANYONE is climbing over 2 turbos sitting at 1200 degrees next to you in the passenger side.
@@tripprogers4814 You are correct, i didn't think about that, there ain't no way your getting out of that Passenger Side door with those Turbos and Piping blocking the Exit. It looks to be a very Unsafe Set-Up.
This is the worst idea I've seen in a long time. These turbos are known for exploding through the comp housing- Garrett is the only brand that's put serious RnD into containment and guarantee that any failures will be contained within the housing. They run them until failure on a test rig and inspect for damage and redesign as necessary... The number of race cars I've seen destroyed by turbo failures (usually shit hits the fan when shrapnel penetrates the fuel tank or fuel lines). I agree, I wouldn't want to be sitting next to those Precision turbos (one of the most common to fail at this end of motorsport). As for the climbing over the hot turbos if the car gets stuck up against the driver's door on the wall- that gotta be one of the NHRA's issues with it. I bet they weren't happy about the risk to the driver if one were to fail either... On another note, you'd think the hot pipes would damage the plexiglass screen in the rear... The heat wrap on the pipes will contain more heat (obviously) and shoot hotter exhaust out their ends because no heat is lost as the exhaust travels through the pipe... Wonder what plexiglass is rated to heat wise, that could cause a fire in itself
@@danielbrealey2924 I've always prefered Garrett Turbos over the rest of em. One of the reasons why is exactly what you said about Garrett,s R & D on there Turbos.
@@badass6.0powerstroke10 Yep, I agree. Only ever buy Garrett turbos for my cars as well... They last like an OEM quality part too, they are worth the money
Reaction time was on point. Wicked!!!!
Nice fabrication👌👌👌
“Sonny Leonard Hemi headed Chevy, it’s a nice piece. And Horsepower’s UNLIMITED” lol
Alan Root built the blocks for Sonny.
He also builds all the coyote billet blocks for mmr.
Mechanic: how big do you want your turbo sir?
Client: yes
A little wiggle just to say goodbye to the starting line and I'm the winner he said thank you for sharing this wonderful video
Thought it was a Ford Godzilla motor,it's just the cars name!
Jesus is coming. Submit to Christ or perish
Breaking all the barriers. Hey Maverick ready for takeoff. Afterburner on . ❤
The size of them bloody turbos !
Time ???
Big Block Chevy with Hemi heads if memory is correct thats Fabian's car I know he did that last year is this a recent video or is this from last year....I would hate be in that car when one of those turbos come apart.
last year
He did that 3 years ago and if you would watch the video it says that it's Fabian's car Skippy
DakotaAuto Sales I did watch the video but new it was his car...Was it 3 years ago already man time flies when you get older
@@chuckfowler8875 Yes sir 3 years
I'm dying to hear what this monster sounds like in the driver seat on a pass!
the name fits the car. what a insane build.
Well that negates the need for firewalls.
“If you ain’t you ain’t, if you are you are!” Ain’t no telling wth that means but I’m bout to start using it! 🤦♂️🤣
If you know, you KNOW
Holy effin turbos!! I just don't know how comfortable I would feel sitting next to those things at 8500 rpm 😳
Those turbos are probably spinning over 100,000 RPM at peak power
I think I’d want a separate cage of some sorts just to contain a grenading turbo… 😳
8500 lol That’s cute. Mf don’t much start making boost til about 10k lol twin 98s on a Hemi? That mf will Rev to 15k for sure lol the PC Hemi cars are shifting at over 12k in race trim
And yes that engine revs all the ppl guesstimating the turbo revs in the 6 figures prob aren’t too far off being right 😂
@@brandonharze2133 Yes, that is Correct, Turbo Shafts Spin Well Over 100,000 rpms.
Hes has two different set ups since this set up. And the car is gold now and it looks amazing
Did I hear him roasting down the whole length of the track? My god man
Like old quote says just let me run my machine an have fun.
The fastest Indian..
Looks like 900+cubs of motor that thing is huge 🤯
i was about to ask why not just put the turbos next to the engine and then i saw the engine
Imagine those monsters coming apart beside you going down the track
Over two yrs old. Turbos were moved long ago.
How old is this video my hart sunk when I herd Alamo city motorplex
I'm not so sure when there's more engine than car there!!! Wow!! Gonna be a handful!
Car, sick. Music for intro, sick
I’ve seen turbines come apart. I would not be comfy in that seat. But holy crap that is so awesome!
Mike, where does the passengers sit?
Looks like they built a car around those turbos.
Wonder if he could just add a fire wall on the middle of the car to keep nhra happy if you did it in carbon it wouldn’t add much weight either
Ummm, they sell Surplus Jets...Didn't have to go thru all this trouble, Sonny....
Whats that track at the beginning called? Thx 🙏🏻
The epitome of a death trap 🤣🤣 bad to the bone
For all stating that turbos wont launch debris...read below or click on link below directly :
I made the cylinderhead for this. 1th run it made 7500 rpm . 2th pull BOOM. This turbine wheel dug its way out of the hiusing and cut through 0,3" thick chromemoly. The go pro on 80 frames per second with a field view of 20 yards did not even catch a red stripe. The turbine wheel was luckiky shot into the roof of Ahoy. These run at 100k revs. Resulting in a blade tip speed of about 2000ft per second. Yup..you read that right. As the shielding will try to stop the wheel coming out the inconel turbine wheel will create about 500 hp to 750 hp of cutting force. As the inconel is self hardening when ' cold ' deformed...it doesnt get dull or soft. It keeps cutting.
The speed of pièces this wheel was so high ...there werent almost any burrs around the edges of the hole in the hood.
The Dutch Tractor Pull association has taken adequate measures to prevent this happening again. ruclips.net/video/WI0XWdfy6p0/видео.html
That's one hell of a sketchy setup if I've ever seen one couldn't imagine what would happen if even one of those turbos comes apart
So that's what's the passenger side of car is for.
I love it and I hate it. No standard for safety there with turbos inside the car. Turbo explodes and fire and you are screwed. Not to mention flying shrapnel.
It was definitely a better idea in his head than it was in reality (or I would hope the hell someone wouldn’t put that kind of money into a idea that was that bad in there head also)
That's why they put that thing called a firewall between you and the engine "boom"
All these comments about “I wouldn’t want to sit next to those turbos”….. When was the last time you saw a turbo wheel come through a housing? Never. Be quiet.
Why is the exhaust inside the car?
I would love to see that match up with Cleetus's ride... Ruby or one of them.. 😏
Dam Man that is some serious savage 💩 right there.
0 to 60 in Holy Zhittt
Titanium fire suit?and 2 grenade's for a passenger...
Why Is Everyone Using The Name
Godzilla?... That Is For The GT-R
I want 4000hp..
Well you you are going to have to put the turbos in the passanger side.
Ok then
This is so impressive to see the Technology. I have respect from Charger. they are always friendly on the passengerseat ?
Man I remember when this car came out and his crazy it was!
That's the craziest thing I seen
So what did it run or what does it usually run
We couldn't even see his time on the board at the end. What did he run?
it ran about 2200degrees in the passenger side..lol
Man, I just don’t know about that setup either. I would have a hard time concentrating with whistling turbos and the heat!
..and what if you have to exit a flaming car out of the passenger side???
You must not have watched the video.
@@austinsmith7750 I heard what he said that “it’s not too bad with the fan for clearing the smoke keeping him cool”. but Mike Murillo knows what it is like to be trapped in a car. What happens if he can’t open the driver side door because the car gets pinned up against the wall? Shawn Ellington would never build a car you could’t get out the passenger side of. Neither would Mile, Neither would Stevie Fast, Neither would Lyle Barnett, Neither would 99% of Drivers. I am sure that car won’t be able to pass tech inspection at a majority of events. There is no doubt that it is an awesome car. ..but dang.
@@tripprogers4814 you do realize the car was built for raunchy no prep stuff right? Places where NHRA isn't even allowed on the property...
@@austinsmith7750 yeah, and I also know this video is about a year and a half old. He took it out after JJ’s armdrop.
That's the craziest sh** I've ever seen.....I don't even know what to say .
I CANT IMAGINE HOW HOT IT GETS INSIDE THIS CAR DURING THE SUMMER MONTHS OF RACING
Yeah let's put the turbos right next to my head!🤣🤣
And the torque in Nm ?
I’m here because Donnie Deville thinks this a Ford 7.3 V8
I think there’s an engine on your turbos
What time 1/4 mile ?
What was the time?
WHAT DID HE RUN?!?!?!?
Does that car have a turbo?
I think if he had the exhaust exit through the door, and put a fire wall in enclosing the turbos he'd get away with it.
Wtf are even those, show them to a non car person and they will say it's the air conditioning system 🤣
Is that a K swap?
Bro chill!!
Not trying to be the Debbie downer however, the problem is if you get into a wreck and pin the driver's side, it's highly restricted and dangerous to get you out. I do like the fact you think out of the box.
I guess thats 1 way to make sure you dont break and drive over exhaust oil lol
God bless you.
Tempo?
How loud is that in the car
Great video ❤
I can't believe that dudes flip flops stayed on...
What's the ET ??
I think I seen him batting some psi difference in tires
🤔How many possibly bad scenarios could take place here???
That's racing mate, you either win or die trying.
Yo did anybody see those Turbo wheels
Request a flyby. Roger.
No wonder those wheely bars are so long
might as well run the turbos on the wheelie bars lol
those turbos look like they are from a locomotive
My passengers are Twins!
What could go wrong?😁
Come to JJs arm drop this weekend and find out and if you have a VIP tickets you can come to the weeny roast at JJs house on the river Qweeny is doing the cooking
Everything Murphy's law applies at the track too they are wrapped with a lot of heat shielding that might be enough to keep everything from flying around inside the car
Officer it's stock🗿
which car is this
Turbos must not blow up very much in a promod……. Because the diesel truck pulling world seems to blow them up every run and most of the time it explodes the entire front end off. Couldn’t even imagine the devastation to a driver if they seat next to a set of 98’s when they let go
NEVER SURRENDER
Well I'm not going for a ride in the passenger seat. Lol 😆
Like I said in last comment I know he did that last year for JJs event but supposedly he took them out of the car afterwards so is this video recent or from last year.
It said in the title that this was a throwback video Skippy pay attention
It’s a old video but correct he changed it after jjs circus because nowhere respectable would let him run
That’s serious bald eagles 🦅
Do anybody know how fast he went?
Hate they never show the speed & time! 😒
It's safe?