Hello RcHelpDotCom, I am setting up the 3GX on a Trex250pro dfc and following your how to's. . . got a few questions: 1. How does the power get to the 3GX when using a Spektrum receiver and the kit supplied BEC 2. On the otherhand, if I were to use the 3GX with 1 sattellite, how would the power get to the 3GX through the kits BEC (kit BEC is align RCE-BL15X) Thank you
I`m not having any luck with the servos on my Trex 450 RC running the 3Gx flybarless system. What servos do you like to use. I don`t know what the problem is but the servos jump up and down and are getting hot. You can see the blades move up and down
HiI put the align 3gx v3.1 with the align Flybarless head on my Trex 450 .I`m having trouble with the servos .The ail servo will not reverse. I`m using the spectrum dx8. I went in to the settings on the Radio. I have the 3 servos 120 swash and went in and tried to reverse the servos and that did not work .And I changed the frame to 22 M.S the SW select settings are gyro:Aux2 with the Mode : DSMX. And I tried the settings on the Swash there all at 60.That did not work. If I`m doing something wrong please let me know. And what the set up is on my radio should be.
hello,, just a quick question as iam new to this setting up helicopters, if I had reversed the polarity on the power up the 3gx does it damage the unit ? I cant get it to power up now when it had been powerd up before. many thanks stevie
Hello Sir, am new to the fbl world and i had the following question. Is the 3gx gyro only meant for the T-rex series or i can also use it for example for the mini titan e325 or others clones etc..? Thanks in advance
HiI`m trying to set up my align 3gx system and not having any luck. I'm not getting any lights on the set up and the USB drivers will not update .Is this why the set up lights are not coming on.
I`m still having trouble with the set up. When I bind the unit with the satellite It loses the bind. The satellite starts flashing and it will not bind when I go into the 3gx set up. all the green lights flash and I can`t get into setup mode.
I ask a question,before starting the 3gx all trim must in zero including the throttle?
Hello RcHelpDotCom,
I am setting up the 3GX on a Trex250pro dfc and following your how to's. . . got a few questions:
1. How does the power get to the 3GX when using a Spektrum receiver and the kit supplied BEC
2. On the otherhand, if I were to use the 3GX with 1 sattellite, how would the power get to the 3GX through the kits BEC
(kit BEC is align RCE-BL15X)
Thank you
Thank you!
hi tony i am setting up my 3gx flightbarless unit on my 250 got every fro in the servos exept for the left and right
cant get mine to bind
I`m not having any luck with the servos on my Trex 450 RC running the 3Gx flybarless system. What servos do you like to use. I don`t know what the problem is but the servos jump up and down and are getting hot. You can see the blades move up and down
HiI put the align 3gx v3.1 with the align Flybarless head on my Trex 450 .I`m having trouble with the servos .The ail servo will not reverse. I`m using the spectrum dx8. I went in to the settings on the Radio. I have the 3 servos 120 swash and went in and tried to reverse the servos and that did not work .And I changed the frame to 22 M.S the SW select settings are gyro:Aux2 with the Mode : DSMX. And I tried the settings on the Swash there all at 60.That did not work. If I`m doing something wrong please let me know. And what the set up is on my radio should be.
do i have to setup the servo directions before i setup the flybarless unit
hello,, just a quick question as iam new to this setting up helicopters, if I had reversed the polarity on the power up the 3gx does it damage the unit ? I cant get it to power up now when it had been powerd up before. many thanks stevie
Hello Sir, am new to the fbl world and i had the following question. Is the 3gx gyro only meant for the T-rex series or i can also use it for example for the mini titan e325 or others clones etc..?
Thanks in advance
you can use it for any other helicopter as long as you can mount it flat :)
@@JustinKoenigSilica Bro thanks for the info God bless you!
HiI`m trying to set up my align 3gx system and not having any luck. I'm not getting any lights on the set up and the USB drivers will not update .Is this why the set up lights are not coming on.
hi, does this mean u can use a 6 channel radio on a 7 channel helli with those purple etc leads u showed .thanks
hi,can u run atrex 600 e on 6s as is or do u hav to change loads to make it work,hav seen some on utube seem ok .thanks.
it has a castle ice 2 esc 80 hv on it
I`m still having trouble with the set up. When I bind the unit with the satellite It loses the bind. The satellite starts flashing and it will not bind when I go into the 3gx set up. all the green lights flash and I can`t get into setup mode.
Hello.can i use only satellite receiver with 3GX ? I have trex550x with DX9 Radio . thanks
Yes you can. There are two dedicated ports for Spektrum Satellites and on a 550, I would suggest using both ports with two satellites for safety.
@@RcHelpDotCom thank you.
thanks for your help i sussed it out in the end thanks
cheers thank you