You know Dave, I'm not getting any younger. I really, really, really want to see those new wheels on your C5. Did I say I REALLY want to . . . . Oh yeah, I guess I did. Don't worry, lapses of memory will strike you too, in maybe a half-century or so.😉 Save the Wave🙋♂️
Started dismantling one of the rears today, but had to jump on a work call. Not looking forward to it lol. That's certainly a benefit to going with 25mm.
Can't wait man. I saw the C6 take its first journey of the year. Weather is warming up and most car events are back on schedule. I can't wait to get back out this year
Definitely satisfied. The zinc coating is removed once you hit the brakes for the first time. The area where the pad doesn't contact is still protected and doesn't rust. I also live a couple 100 yards from salt water, so rotors on all my cars get rusty in just a few days of none use.
![Chlöe - Shake (Feat. Jeremih) [Official Visualizer]](http://i.ytimg.com/vi/aDs_1ufpfv8/mqdefault.jpg)
Thanks for watching. Wheels SHOULD be ready FRIDAY!! Hope this helps anybody needing to do the same thing.
That is a lot simplier than pressing in the new wheel studs. Appreciate the quick tip.
The front is easier than the rear. I need to remove the hub for the rear, so not looking forward to that lol
New wheels are going to look absolutely killer!
Thanks buddy. Needs more low, so I'm working on that as well.
Yes I can't wait to see them. Also have to say that Jamal's wheel tyre setup is one I would love on my C5. Looks amazing.
Always helping your community out. Love to see it Dave 👊
I appreciate it bro 🤘
What a STUD!! Now clean those calipers before you put on those fancy new wheels!! Looking forward to seeing it all come together.
Plan on cleaning the wheel wells before those beauts go on. Just need to juggle time here and there to get everything done for when I pick them up
im excited for these wheels man, its gonna look good, way better than the stock
AGREED!! Hope to get a sneak peek tomorrow or Thursday 😁
You know Dave, I'm not getting any younger. I really, really, really want to see those new wheels on your C5. Did I say I REALLY want to . . . . Oh yeah, I guess I did. Don't worry, lapses of memory will strike you too, in maybe a half-century or so.😉 Save the Wave🙋♂️
You make it look easy. Hopefully the rears aren't too terrible.
They've been fighting me, but I'll get them out here in the next few days
Do the front studs really tap out that easy? Snapped one today hopefully I can get it out.
I'll find out today if 1/2" longer studs can be done this way. I pray they'll go 😂
Haha let me know man. It's going to be close. Good luck 👍
I want to Do the same as you is it working with 1/2" longer ones ?
@@huskythedoggo Worked great! 10 minutes per wheel. Got my studs from Doug Rippie Motorsports! 👍
@@chrismiddleton6658 thanks for the Fast answer, it worked without mounting off the break and caliper ? Like in Yellowvettes Video ? 🤓
@@huskythedoggo The exact same way.
Nice job Dave! I heard the back is a pain in the nuts to do lol. I got 25mm spacers all around so didn’t have to cut off much.
Started dismantling one of the rears today, but had to jump on a work call. Not looking forward to it lol. That's certainly a benefit to going with 25mm.
Nice...
Thanks for watching and the continued support
New.wheels should look sweet bro!!
Can't wait man. I saw the C6 take its first journey of the year. Weather is warming up and most car events are back on schedule. I can't wait to get back out this year
@@YellowVette04 I know man! I been seeing quite a few C8’s on the road. Looks like a super car!!
I was shocked when I saw the first one driving towards me. Badass car for sure and they shift lightning quick. It's crazy... one day 🤔💭 lol
Man I hate wheel spacers I wouldn't go more than a1/4 " with them
I hear you. I wouldn't have done it if I could do it all over again. Live and learn. Thanks for watching and commenting.
you might have changed my mind about getting spacers lol
The front isn't too bad of you ever want to reverse it. I would go with 1" (25mm) for the rear and you won't have to cut the studs down like I did.
When is the first show this year
April 24th, 12-4 at Hamilton Tap & Grill.
Happy Easter fellas
Happy Easter buddy
Hey!! the disc brake you got they are from Ebay? From brake motive cie ?
Yes, these are the Brake Motive brakes from eBay. Put them on almost a year ago.
@@YellowVette04 Nice are u satisfaying and did they come Rusty
Definitely satisfied. The zinc coating is removed once you hit the brakes for the first time. The area where the pad doesn't contact is still protected and doesn't rust. I also live a couple 100 yards from salt water, so rotors on all my cars get rusty in just a few days of none use.
@@YellowVette04 it Will be m'y next purchase ! Thank you great content
When do we get the rear wheel video buddy? I need to reverse my spacers for my new wheels as well! Thanks!
Rear wheel is up. I thought about replacing the rear bearing, which is something you may want to consider as well, but I didn't replace it.
I don't know what's up with these millennials and cutting their wheel studs. Back in my day...
Lol I hear you buddy. I'm older and wiser a year later and would not have done this if I knew I was getting wheels.