KAWASAKI VULCAN 1500 [2004] How to change clutch , replacement by The Old Mechanic PART 1 👨🔧---🏍
HTML-код
- Опубликовано: 24 авг 2024
- In this KAWASAKI VULCAN video I show you how you can change your SLIPPING CLUTCH plates.
Both the Friction plates and Steel plates, and the clutch spring too.
With my detailed video you can do this repair yourself and save a lot of money.
This is PART 1 how to take your clutch plates out.
For more Kawasaki Vulcan maintenance video's click here:
• KAWASAKI VULCAN 1500 [...
So be sure to watch this WHOLE video, so you don't mis important information.
Kawasaki VN1500 Vulcan maintenance, made easy.
DIY Motorcycle maintenance made easy By: The Old Mechanic.
THANKS For WATCHING!
If you want to support my channel, so I can make more of these maintenance video's for you,
please push the --- ♥️ THANKS -- button below. Any amound is more then welcome.
Don't forget to SUBSCRIBE LIKE and SHARE this video with your all your friends on FaceBook.
#TheOldMechanic #motorcyclemaintenance #kawasakivulcan
Motorcycle maintenance made easy by: The Old Mechanic
This video series could not have been timed better, the minute I needed a new clutch this video is uploaded. Thank yoy
Hi Vanilla, good to know !
I think this is one of the best tutorial I ever seen
Wow what a great compliment ♥️👍🏻👊🏻🏍
Thank you man this is literally the most helpful tutorial I've ever seen how just got my Vulcan 1500 is a 2002 except for a couple of years putting the fuel injectors in it and new spark plugs and coil packs got it running and riding real good and then when it gets warm the clutch don't want to ship replace the clutch cable thought that was it nope it's the clutch thank you man
would love to see a stator replacement same 1500 vulcan classic..
Hi Richard have a look in this playlist: ruclips.net/video/l8lchQUNNkQ/видео.html
Bedankt altijd makkelijk om te zien wat je tegen gaat komen.
Perfect uitgelegd.
Dankje wel Johan 👍🏻👊🏻
Thank you. I was wondering if this is something I can do. You have made it clear to me that this is indeed a job I can handle. Thank you
👍🏻
Superb tutorial! Thank you for the clear and concise demonstration!
Thanks Derby !
You ar fantastik...thank y sooo verry mutch...Benny from halmstad sweden
Thank you too! 👍🏻👊🏻😉
Hi ...thank you for the video ..very good....my clutch is fine but I need to replace the oil pump gear behind it ...can I take the fully assembled clutch off in one piece? since I don't need to renew the clutch I just need to get access to the gear
Thanks
Excellent. I was having trouble trying to remove the nut from the clutch plate housing. On the way to pick up a new Impact air wrench.
Im having trouble removing the shaft holding the washers. That thing is not moving at all. Any ideas on how to remove it?
Would love to see a valve adjustment video on this bike.
Hi old mechanic , I have a situation with the hub nut I can’t get it to come loose even with the impact gun , tried to heat up still don’t work , go it in first and try it to loose with extended bar still hard as a rock and the basket clutch start to turn , any ideas that can help me I’ll will appreciate it .
Excellent tutorial..
Thanks 👍🏻👊🏻
Hey boss can you show or make a video of where the jacking point for 2005 vulcan 1500 classic using a hf motorcycle jack
Hello, thanks for your very good video, but when you show the position the first disk you go out you mistake position when you show. Right?
Thanks for this series.
Assuming the clutch is the same as the Vulcan nomad?
Thanks for sharing! Could you tell me what causes a clunk while shifting from 1st to 2nd and grinding noise at times and doesn't always want to shift and also while shifting down in 2002 Kawasaki Vulcan 1500 thank you.
Danke für das tolle Video 😊 könnte ich es auch bei einer VN 1600 verwenden? Danke
Hi there.
I am running into an issue with my limiter starter torque. I have the supplies to change it but am scared to tear it down. Have you ever had to replace this before? If so how difficult was it? Thanks in advance!
hello good night friend, I would like to know, if you could help me, I have a kawazaki vulcan 1500cc 1992 I bought the bike some time ago, and it came with a problem, that when I accelerate it in first gear, it slips out of gear , but it's like she escapes and engages again, and as if I had very quickly, I had pulled the clutch lever and released it in seconds, but this without having lost the clutch
Just new here and have a quick question, do you need to put in clutch gripping additive in the oil for the clutches?
hello friend congratulations for the great channel, my name is Arilton Ricardo I have a 1992 kawazaki vulcan 1500cc and I would like to know if it is possible to replace the 4-speed gearbox with a 5-speed ??? thanks
my friend, please ask me a question, is the starting plate on this bike on this side next to the clutch?
Good evening from Tennessee. Thank you for this clutch video! I hope you don't mind my ignorance, but I have a question regarding the steel plates for the clutch on my 2001 Vulcan 1500 Classic FI. Finally got around to tearing it down and getting ready to order parts. The steel plates (7) are listed as 1.6, 2.0, or 2.3 which is best...whats benefits one over the other? I am also ordering the MS Spring. Thank you for the time...want to order the correct parts.
Hi fellow vulcan rider, nice video!! My bike is hesitating to go when power is put down pretty such its the clutch. Was wondering if the steel plates are damaged do you need to replaces those also? Found the clutch plates so far, gonna be my first time touching a bare clutch
is this clutch hydrawlic or wire i need to do a job similar to this one ... my clutch is supper hard more than normal bike still rides fine its just the clutch is supper hard my hand gets tired quick ... i was told i needed to bleed out my clutch i have a 96 kawasaki 1500
Hola soy de colombia me puedes alludar en algo como pongo en tiempo los cilindros porfavor te lo agradecería muchísimo
i have a question, not sure if its a dumb one or not but can you install a new clutch assembly while its all together or do you have to install it a piece at a time?
You have to install it piece by piece 😉
Thanks 💪💪💪💪🍻🍻🍻🍻
Why take the nut off if just changing the fiber plates? The plate will come off still exposing fiber plates no?
Hi Snatch,The nut has to come off as the frictionplates are behind the clutch spring plate, and the clutch spring.
thank you slow english from asian mechanic
Your welcome Tiger 👍🏍
I replace the clutch on my Vulcan by bt my bike still roles even though the clutch lever in press all the way in what could be the problem
after replacing the clutch you will need to adjust the cable tension
Someone help can’t get that hub nut off even with a impact wrench 🤦♂️
Maybe use a brake cleaner or carb cleaner to clean the nut then use a loose nut.sit for 5 minutes and try again. If it not working, put in first gear and try with an extended drive bar. Probably it Will try to turn over but there is a Bolt you can look on between thèse 2 gear at the right.
Good luck!
@@BadVirgil thanks I finally got it all put back together however now I have a oil leak that I can’t seem to stop. I tapped the bolts that I stripped , tried seal all still happens
Hi, is the gasket leaking ? If so beshure you get the original kawasaki gasket mate 😉 I had an oil leak, and got the Kawa gasket problem solved.
For the stript bolds did you used a Helicoil ?
@@TheOldMechanic I replaced the gasket with one from online it is almost exactly the same only difference is the material it’s made of… I have another I might just take it off an redo it a second time