Magnífico trabajo mi querido amigo, como siempre nos deleita con una obra de arte.....También me he alegrado mucho de poder ver a sus hermosas mascotas y su familia....Gracias de corazón por su gran labor divulgativa y sus estupendas aportaciones a la comunidad y al canal.....Un gran abrazo fraternal y muchas bendiciones desde Las Islas Canarias (España)............................................
Quality talaga sir mga gawa mo. yung 10'' dual ported na ginawa ko na design mo ganda parin, daming nagagandahan sa bass ang linis ng buga kahit direct source lang 😃
Very nice job I bet it sounds excellent! I'm struggling to learn box design right now. I never realized how critical box design is to get good sound and output from a subwoofer until recently.
I think audio companies should send their engineers to you for some training why lie😅😅.i love the perfection you bring out to every single project you undertake...from the specs, till the end product is just satisfying to watch😍.
very professional work it looks like it is store bought tska ung amplifier po ng sub kinuha nyo lang po sa ibang system o out of the factory ganyan na po?
@@chrclmnky well what you said is true but sometimes you gotta put it in the living room where other people do their own thing and they turn on the ligths
hight…...........??? Width.............??? Deep..............??? Port ...............??? Plz send me size i have Kenwood 3010 subwoofer plz bro give me correct measurements box plz help me
Hello Norman, the sub and amp were sent by the customer and they were purchased from Parts Express. Material and labor cost on building the box was about $250 and that includes shipping to the customer here in the Philippines.
good equipment, the bad thing is that the amplifier is a switched supply and the worst thing is that it is made in china, I prefer vintage, since everything vintage is made to last, made with good materials, and the coolest thing is that it is made in its country of origin, oh made in malaysia, which is something well made,
Wdym Smps is bad, Switch supply Has a good loud bass, the bad thing is when you use it for Mid High frequency without any crossover, it's sound so sharp and noisy. But he didn't use for it so
Ang ganda talaga ng mga gawa mo boss. Ang sarap talaga pag skilled ka... ang hirap ng walang talent.
Zero skills din ako sir sa simula. 🤭
Same even today i still have no skill for building speaker boxes but table saw makes the job way way easier than using a jig saw to cut the wood
Magnífico trabajo mi querido amigo, como siempre nos deleita con una obra de arte.....También me he alegrado mucho de poder ver a sus hermosas mascotas y su familia....Gracias de corazón por su gran labor divulgativa y sus estupendas aportaciones a la comunidad y al canal.....Un gran abrazo fraternal y muchas bendiciones desde Las Islas Canarias (España)............................................
Приятно смотреть на работу профи! Всё делается с расчётами и по канонам жанра! Слава богу, нет аудиофильских соплей и нытья про серебро в проводах 🤟👍
Thanks for the feedback. 🐵😎
Wow that's a huge subwoofer, I can't wait to hear the sound!
You and me both!
Quality talaga sir mga gawa mo. yung 10'' dual ported na ginawa ko na design mo ganda parin, daming nagagandahan sa bass ang linis ng buga kahit direct source lang 😃
Matsalams po sir. Keep building and enjoy. 😎🤓👌
Very nice job I bet it sounds excellent! I'm struggling to learn box design right now. I never realized how critical box design is to get good sound and output from a subwoofer until recently.
Thanks. A little more research and tests will get us there.
I think audio companies should send their engineers to you for some training why lie😅😅.i love the perfection you bring out to every single project you undertake...from the specs, till the end product is just satisfying to watch😍.
Thank you Uncle Blue. 😁
Master of all DIY work in
Philippines
💯💯💯💯👌👌👌👌
Hai from Qatar
Thanks Mat. 🙂 Cheers!
THE BEST ka talaga IDOL Gumawa Sobrang linis🤗🤗
Matsalams po
I have Kenwood sw501 from 90s looks same as this. Very good sub. Banging the whole house
😎😎🤩🤩
This looks beautiful.
@@mhnoni thanks
Sinawa kaau boss oi nindot pa jod pagkahimo👍
Matsalams sir
“Again Great Video” 👍🏻 Bro
Thanks again! 😎😍
thank you for sharing sir. time to change the enclosure of my box
😎
As always, a very nice build.
Thanks again!
Nice👍the paint job looks great😎
Thanks E Dud
wow.nindota ana sir oi.if dool.pata diri sa cebu nindota kaha sa akong box subwoofer kay mag pahimo jud ko nimo hehe tnx for sharing with us
Admiro muito o seu trabalho, tens habilidades e faz um excelente trabalho. Parabéns!
Thank you Paulo.
Already liking this one👌🏿
Thanks brother
Really nice u got skills 🔥
@@cbonner1964 thanks Carl
Como sempre mandando super bem, parabéns pelo otimo projeto.
As always doing very well, congratulations on the great project. :)
Thank you Edu
Great job👍
Sound LOVER 🇮🇳⚡
hello from the philippines
Hi brother, Good presentation and nice work... 💚
Thank you so much 🙂
@@chrclmnky 😎😎
Excellent work 👍🇬🇷
Thanks a bunch, Nikkos 🇵🇭
Very nice video 👏
Thanks Mark
Awesome build. Proper!
Oh yeah!
Watta awesome project Lods😍
Thanks sir
Pretty girl she make me think of an apple :D
Oh and perfect work as always!
👱♀️
very professional work it looks like it is store bought tska ung amplifier po ng sub kinuha nyo lang po sa ibang system o out of the factory ganyan na po?
Thanks. Amp was purchased from Parts Express few years ago by the customer.
Ang ganda ng pagkakagawa pulidong pulido
Hey would you recommend putting the HE version of this woofer inside the same case?
@@maesl69 yes sir
amazing Work😍
Thanks Matt
Nalingaw ko SA mga doggie cute KAAYO from CDO.
Good day sir...can you send me the description of your subwoofer amplfier board...
A work of art indeed. Sa Raon po kayo namimili ng parts like the amplifier and speaker? If yes alin po na store?
Thanks. Customer bought everything from Parts Express.
I love to watch those cute charcoal doggies.
Yes they're cute. ☺️🐶
Gaganda Ng mga gawa mo idol😊❤️
Thanks
How you can make subwoofer box Very clean
Thanks
@@chrclmnky 🥰
this is incredible good job bruh
Thanks a many MacMilli
te quedó bien bacan .
Superb work
Thank you Ajith
Só faltou ligar pra nois ouvir !! A parte mais importante deixou passar
Watch out for the test video next year.
Thanks for the video. Is there a difference between a home theater sub and the car subwoofer?
Box design and appearance.
galing ganda ng gawa
Thanks 🧨🧯😎
Sir uska bord kahase kharide ham kuch karva do
Super Sir 👌👌👌
Many thanks, Narasimha. 😁😀
Wow 👌 nice.
Nice dogs!!👍
Yes they are. 🐶🐕🦺
Try to paint the orenge port black so when somebody desides to have a peek in the port it would be black like the front port
They can't see anything there. Home theater subs are usually placed in the dark corners of the house.
@@chrclmnky well what you said is true but sometimes you gotta put it in the living room where other people do their own thing and they turn on the ligths
@@anxiety1209 no monkey business in customer's house 😆
well done sir, pwede mkipag sabayan sa branded
Many thanks po sir. 😎😅
Good job
Thanks
We expect a little sound demo at last sir.
Next week
Sir can you share me the box size of 10 inch dual magnet suboofer 300 watt rms aeroport enclosure
Wow ganda nman boss saan ka bumibili ng Amplifier Board?
Sa customer po yung mga parts.
Nice sir
Thanks Mahesh
Lupit neto boss! Yung design pang branded sub na. Gumagawa ka ba ng enclosure lang boss?
Thanks po sir. Yes sir but not for the meantime. Too busy on local installs po.
I have 2 of the 8 ohm versions of this driver still in the box.
cool
I really like them actually, just need to put them in something lol.@@chrclmnky
hellow friend....
It's nice 👍💪
Thank you! Cheers!
CM boss, you mentioned Parts Express. They ship to our lovely RP? For example, loudspeakers, amps, your little measuring box (model# ?). Thx. 🙏🏾
I think they ship stuff to all over the world.
@@chrclmnky I am waiting for reply from them. Maybe you got your little loudspeaker measurement from Dayton? Hang in there!
@@danielcortez5092 DATS v3, yes purchased from Parts-Express.
Link to purchase the products used in the video
Superb 👌 sir
Thanks again
Nice
How did you make the flares?
Watch this video ruclips.net/video/nJRR1O5zvKg/видео.html at about 1 min 52 seconds to see how i did the flares
@@chrclmnky thanks
hight…...........???
Width.............???
Deep..............???
Port ...............???
Plz send me size i have Kenwood 3010 subwoofer plz bro give me correct measurements box plz help me
What program do you use to design the boxes or to figure out dimensions?
Bass Box 6 Pro as usual
it seems to be it is tuned pretty low (big box + long port)...I have a 6.5 inch tuned to 22 Hz (videos on my channel)
Yeah that's what home theater subwoofers must be.
Anggaling nang gawa boss saan ka po sa pinas balak ko gumawa ng subwoofer na 100watts lang po
Thanks. 👍😎
Which sounds better for home the JBL powered subwoofer that you made or this subwoofer?
Same
@@chrclmnky and what cabinet size you used in JBL speaker. Is it according to JBL manual of custom
@@Apocalypse_30 i did my own computation.
@@chrclmnky ohh✌🏻👍🏻
Просто Идеально!
Many thanks! 😃😋🤩
Nice
Thanks brother
What is each stage of creating that speaker box?
Stage 1 - Build, Stage 2 - Showcase
@@chrclmnky What I mean about the painting process.
Parinig naman po ng tunog nyan sir salamat ✌️😊
which is the paint
Brother Just small request to you, To make video about 31HZ frequency tuned subwoofer box for Sony Xplod subwoofer speaker
I'm from India and make custom speakers for people, I'll help u out for free u can email me
Subwoofer demo video bro. Uploaded
Ok coming up soon.
Bhai iska sound test video banao
Gusto ko magpagawa😍
Pwede.
@@chrclmnky pm ako sa FB sir
So nice and so awesome..please for giveaway.
Sure why not
How to buy
What was the total cost?
And when do you use stuffing in a box?
Hello Norman, the sub and amp were sent by the customer and they were purchased from Parts Express. Material and labor cost on building the box was about $250 and that includes shipping to the customer here in the Philippines.
That is very cheap!
Ano sir yung pintura bago mo siya pinamasilyahan?
Lacquer sanding sealer
Sir magkano po ang ganyan design? Kasama na lahat peyesa salamat po
good equipment, the bad thing is that the amplifier is a switched supply and the worst thing is that it is made in china, I prefer vintage, since everything vintage is made to last, made with good materials, and the coolest thing is that it is made in its country of origin, oh made in malaysia, which is something well made,
Everything in Parts Express are made in China and nearby Asian countries.
Wdym Smps is bad, Switch supply Has a good loud bass, the bad thing is when you use it for Mid High frequency without any crossover, it's sound so sharp and noisy.
But he didn't use for it so
Total cost
just a few $$$
But isme powersupply koun si lge gi sir
Hindi nhi janta woh
I want to buy this how much money can I take
Just a few
Magkano kapag buo na idol?
sir pila ning ingon ani na pang 12inches na subwoofer box only?salamat sir gensan area lng ko sir
ikaw to ni inquire sa page nga naay Autobahn subwoofer?
Ek hamare liye bhejo bana ke havy bass sound system 🙏🙏🙏
Price
Sir please tell me how much rms is PA 80d amplifier? 😭😭
No idea
kaya din ng amplifier na yan ang konzert kw3000m?
This is a powered subwoofer. What are you talking about?
Please show testing
Yes next week
Means any video ending show testing
Box measurements tell me plz bro rply me
Check description
this amp i need . where getting
At Parts Express
I want your fabrications in my room
Sure. 🙂😎
Idol magkano aabutin kung magpagawa sau ng ganyang subwoofer?
Bili nalang po kayo ng mga readily available, mas mapalaki po yung gastos ninyo.
I want to have it...
Hi Friend, why the panel in the center of the box (with the circle and rectangle cut out of it)? Just to hold the tube?
Yes, just to hold the tube.
How much
Just a few $$$