I have the same motor mount on my xrt I just cut a slot out the body and put a vent over the slot I cut out and it works just fine without shaving the motor mount down and the vent looks like it came attached to the car
it’s all plastic but people are blowing diffs stock so who knows. that motor is actually a chinese motor that comes with the truck stock my local hobby shop say?? i’m still shocked about how many VXL-8s updated ESC where at the hobby shop today for warranty repairs. today it was 14 last week it was 11. unbelievable great job thanks 🙏 for sharing I want to see the finish run
Excellent video to start that day w a cup of coffee. Mr. Earl my Lectron Pro 7600 4s hard packs are to big for this Xrt. what battiers are you running? Please and Thankyou. Happy Holidays!
@@earlmoorhead5555 got ya .. awesome vid I’m learning a lot about the xrt and I think I’m gonna build the poor mans xrt so both of yas have been very helpful . Just wanted to say thanks and keep on keepin 👊🏻👊🏻👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
That motor mount is not wfo. It’s Poseidon or a knock off of it. Not fitting them fans on there either boss. That motor mount is pretty wobbly from wat I heard. M2c has one that I’m using and making another one that’s going to be even better. And that 1100kv is 2-3x better then stock junk. Ur going to love it. 30-32/46 is right around we’re ur best gearing is I’m running 34 but it’s cold here
@@earlmoorhead5555 ok was it stock and what seems to be weak area's cought rear bulkhead ,im going to leave it stock as to PLAY with while camping, I do know everything breaks but some more than others, all my nitro and gasoline powered viechles make a disturbance in RV park
FAQ: is the turning resistance of a motor an indicator for power output? In my opinion it’s not! The manufacturers prefer or decide for the best amount of iron in the windings- some motors don’t have any iron but just copper to create the magnetic fields, so you can turn the rotor without a resistance. So now it’s a question of believe?🤷🏻♂️ More copper and more square in windings can be better but iron as core material can also be good for a more powerful magnetic field ????
@@earlmoorhead5555 😂🤣😂🤣 The other day for a split second or maybe four I was fitting the X-Max body onto my conversion and couldn't figure out why it was slightly extra tighter trying to fit it 😂🤣😂🤣😂
Thought for sure that heat sink was going to snap before it opened up enough for that monster motor. Well played good sir. Can't wait to see it rip!
😱😂
I have the same motor. Was really happy to see someone try to fit the stock heatsink on it.
That's quite the motor, it'll be interesting to see it in action. Nice job 🚚 💯
Cool trick with the heat sink! 💪🏾
Just picked up a demo XRT to play with, epic
Great 👍🏽 video again Earl 👍🏽👍🏽👍🏽 on the Res To Mod!!!!! Hope it works out well for you.
Forget the xrt let’s get back to the Mojave! Lol thanks for the vid buddy good stuff as always
You in guy are to fo good RUclips 👍 Earl cool videos like live good job 👏
Thanks
WFO is a local in my town that I did work for. Showed me around and his shop
The m2c xmaxx mount is a direct bolt on but they're coming out with an XRT specific one soon.
Going to be fast 💯💯💯 GC Fans on the sides
Earl like to Today cool videos love job on the xrt Traxxas 💯👏
Thanks
4:35 Iowa time? Coffee Time.💯😄
Yes 👍
Sweet I cant wait to see that bad boy run !!
I have the same motor mount on my xrt I just cut a slot out the body and put a vent over the slot I cut out and it works just fine without shaving the motor mount down and the vent looks like it came attached to the car
Good video. I would have used threat lock when assembling the mount though.
I can't wait to see it with more powah!! 😉🤣💯
Can't wait to see what it can do 💪
it’s all plastic but people are blowing diffs stock so who knows. that motor is actually a chinese motor that comes with the truck stock my local hobby shop say?? i’m still shocked about how many VXL-8s updated ESC where at the hobby shop today for warranty repairs. today it was 14 last week it was 11. unbelievable great job thanks 🙏 for sharing I want to see the finish run
i was wondering, what bits do you use for your electric driver?
Mip
Excellent video to start that day w a cup of coffee. Mr. Earl my Lectron Pro 7600 4s hard packs are to big for this Xrt. what battiers are you running? Please and Thankyou. Happy Holidays!
Thanks
Just cut the top of the mount ?? Or is the motor hitting it ?? 👍👊🏻👊🏻🇺🇸🇺🇸
Mount not hitting fan’s hit
@@earlmoorhead5555 got ya .. awesome vid I’m learning a lot about the xrt and I think I’m gonna build the poor mans xrt so both of yas have been very helpful . Just wanted to say thanks and keep on keepin 👊🏻👊🏻👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
looks like its going to need a special low mount to fit
Looking forward to seeing the difference in performance , should be a ripper
I have the 30/46 gearing in my no heat issue yet.
Will the motor fan fit the castle 1520 1650 kv
The XRT fan won’t go to that small can size
That motor mount is not wfo. It’s Poseidon or a knock off of it. Not fitting them fans on there either boss. That motor mount is pretty wobbly from wat I heard. M2c has one that I’m using and making another one that’s going to be even better. And that 1100kv is 2-3x better then stock junk. Ur going to love it. 30-32/46 is right around we’re ur best gearing is I’m running 34 but it’s cold here
I bought that mount back when true boys did his xmaxx 🤪
@@earlmoorhead5555 holy shit lol.
This will be interesting 😆
Yes 👍
What gearing did you end up going with?
Top 10 heck yeah!!!
Notification squad 💯👍🔥
💯👍..build that beast..
Yes
Gear her right may not need any fans Earl! I ran the mod1s with 30/50 got to 160 but never went over it.
Exciting
At least any MODS to Traxxas plastic parts can be replaced on the cheap if they don't work out🤫😜
Yes
Well I see Snap-On tools ,now just waiting for one of Y'all to show the weak parts on this truck ,and up dates
Done a few updates already broke every time out 🤔👀
@@earlmoorhead5555 ok was it stock and what seems to be weak area's cought rear bulkhead ,im going to leave it stock as to PLAY with while camping, I do know everything breaks but some more than others, all my nitro and gasoline powered viechles make a disturbance in RV park
💪👍👊
Notification squad 👌👍🔥👑
I need one now lol
😎💯💯💯
Boom 🎉
FAQ: is the turning resistance of a motor an indicator for power output?
In my opinion it’s not! The manufacturers prefer or decide for the best amount of iron in the windings- some motors don’t have any iron but just copper to create the magnetic fields, so you can turn the rotor without a resistance.
So now it’s a question of believe?🤷🏻♂️
More copper and more square in windings can be better but iron as core material can also be good for a more powerful magnetic field ????
Stronger magnetic seem to have better top speed but not as smooth down low
Where's the WFO mount? All I see is the cheap ebay mount.
Little heat on that body😜
Maybe I will 😱
Second😄
Notification squad 🔥👍👌💯
🤣😂 gonna have to flip the body and just drive it as REAR STEER 🤣😂🤣😂
It fits
Backwards I tried lol
@@earlmoorhead5555 😂🤣😂🤣 The other day for a split second or maybe four I was fitting the X-Max body onto my conversion and couldn't figure out why it was slightly extra tighter trying to fit it 😂🤣😂🤣😂
@@rcguygarage lmao 😂