You need to get a m2c so you can mount the max5 and put your receiver back stock place. I am running 32/46 in my it don't wheelie as much like yours and I love it.
I have a Max 6 G2 on my Xrt..24/46 on the Xrt belted wheels.im only getting bout 55...I'm trying to get 70mph on the belted tires.. What's a good set up for mine?? Thanks
I🧐would move to an upgraded gear set, keep your factory gear ratio and decrease THR rate in the TX, thereby reserving your SP. Possibly increase stability by offsetting the truck’s CG using counter weights. If adding more weight, also consider modifying suspension with dampers for additional support. Hope this helps! 🙂
I love this car. Great body wheels combination colour wise. I had an xmaxx and a losi 5b 8s with the same motor and esc combo you put in the txt. I sold it all… but now I want back into the hobby and this car might be it 💪🏻
Very interesting setup!! Seems to be (at will, depending of your throttle management) a truggy, or a stunter! Do you think the couple 56118/Max5HV would be similar?
Love the video, your enthusiasm for this truggy is awesome , I have the same motor in my Kraton , it won't be long you'll be pulling that motor from the xrt , it just won't hold up to the power
You are very likeable and the video was so fun. Im confused why you would want it with so much torque. Does this have a slipper clutch that you can loosen? Or is this just because of your pinion size?
How is it fun driving that XRT with that much power? I am sold on Arrma I bought the Typon Tuned TLR and it is fast and stable it's 4x4 and it stays on the ground so I'm able to use all the power. I have a Traxxas Rustler VXL 2wd and it does wheelies all up and down the road so I can't use all the power and it's not as fun as my Typhon.
I went mod 1.5 because the hardend steel doesn’t break but just strips. And you might want to shim your diffs for longevity. I run the hobbywing 5687 which is probably even a little less powerfull than this motor.
Definitely looks it in the video but with the amount of space we have, no matter how gradual I am with the power it will lift the wheels off the ground. I'm going to a very long road this morning with some belted tires to give it a proper go for top speed. Thanks for watching!
I can only imagine how much fun the XRT is to drive. You might want to try a dry lake bed next time. Love the double back flip off the fence. Αωєѕσмє 🏆
Just use the stock fans and heat sink. I put the heat sink on a vice and used it to spread the heat sink open enough to slide the motor in. Then reinstalled the fans. Problem solved
You need to go with WFO 1.5 steel mod spur and pinion gear combo. Anytime you mod up to a big motor, esc and battery combo you need to upgrade other supports like your gears, steering, tires and what not because you will break something on that truck because of so much torque and power that 5th scale motor is putting out. You can't even keep the front end down when trying to do a high speed pass because so much torque coming out from that motor when you barely throttle into it. If you do a high speed pass next time try switching to street tires and change your gearing.
The gear set your going to use as a replacement /upgrade is the Traxxas, 'Spur gear, 50-tooth (machined, hardened steel) (wide-face)/ gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw, MODEL# 6450' ?
I want a XRT with all that power 1100kv motor and the extra stuff you put in the orange and black XRT please let me know how much it will have to pay for you to make it for me
Omg! A lil too excited. Lol obviously over powered. It's cool and all but I couldn't see myself enjoying something like that. How can it be fun when it wheelies all the time. Idk. Some people may like that but I'd have to gear it down just to enjoy it. Love the power but I like to rip without all the wheelies. That's just me.
Cool truck have one myself they are fun just watch your temps buddy and have a good time
You need to get a m2c so you can mount the max5 and put your receiver back stock place. I am running 32/46 in my it don't wheelie as much like yours and I love it.
I have a Max 6 G2 on my Xrt..24/46 on the Xrt belted wheels.im only getting bout 55...I'm trying to get 70mph on the belted tires.. What's a good set up for mine?? Thanks
Barrel Roll off the fence 👍🏼🔥. You can do it.💯👊🏻🤪. Good vid 🐈
I🧐would move to an upgraded gear set, keep your factory gear ratio and decrease THR rate in the TX, thereby reserving your SP. Possibly increase stability by offsetting the truck’s CG using counter weights. If adding more weight, also consider modifying suspension with dampers for additional support. Hope this helps! 🙂
weights would destroy it unless its strictly no air-time
@@Xbot4Life very true!
I love this car. Great body wheels combination colour wise. I had an xmaxx and a losi 5b 8s with the same motor and esc combo you put in the txt. I sold it all… but now I want back into the hobby and this car might be it 💪🏻
Very interesting setup!! Seems to be (at will, depending of your throttle management) a truggy, or a stunter! Do you think the couple 56118/Max5HV would be similar?
I’ve lost one too many grub screws being ‘too exited’. This thing looks beastly!
Love the video, your enthusiasm for this truggy is awesome , I have the same motor in my Kraton , it won't be long you'll be pulling that motor from the xrt , it just won't hold up to the power
That and the 1100 don't belong in a " 5th scale " basher
@@maxspl153why
You are very likeable and the video was so fun. Im confused why you would want it with so much torque. Does this have a slipper clutch that you can loosen? Or is this just because of your pinion size?
With great power comes great responsiveness.
My orange wheels are pink now from sun exposure 🤣 looks ridiculous but the tires are still good
Love the enthusiasm! Now i want one lol. Standing backflips are awesome, my 6s outcast loves them.
It’s cool but what fun is it just to do wheelies?
How is it fun driving that XRT with that much power? I am sold on Arrma I bought the Typon Tuned TLR and it is fast and stable it's 4x4 and it stays on the ground so I'm able to use all the power. I have a Traxxas Rustler VXL 2wd and it does wheelies all up and down the road so I can't use all the power and it's not as fun as my Typhon.
R u happy with the 1100 or would u go with the 800kv?
Dude using a stock spur. Lucky to have 1 min with that motor. Blew quick
What kind of runtime on average do you manage to get? Cool video by the way!
Nice! What's the top speed u got?
Anyway from keeping it doing a wheelie from full throttle?
I went mod 1.5 because the hardend steel doesn’t break but just strips. And you might want to shim your diffs for longevity. I run the hobbywing 5687 which is probably even a little less powerfull than this motor.
Good spokesperson but driving needs some practice. You could get a good speed run if you aren’t that trigger happy, lol.
came to say the same thing. lol
Seriously!!!!!!!!
Definitely looks it in the video but with the amount of space we have, no matter how gradual I am with the power it will lift the wheels off the ground. I'm going to a very long road this morning with some belted tires to give it a proper go for top speed. Thanks for watching!
Man stfu, this video is dope 💯
Nice job bro 🔥🦇
Thanks! Just fixed it. Now ready for the mega ramp.
@@therclab.official 💪💪🔥🔥
My 6s kraton does standing backflips, its freekin mental, totally caught me off guard first time it did it.
I Love all your work injoy the best of it keep going 😃👍✌️.
Nice. I want one 😅👍💪
6s is clearly the best way to enjoy driving it
Awesome build man, hey how can I order a Sanford Hobbytown Tee Shirt ? Thanks !!!
Those gears sounds arthritic
I can only imagine how much fun the XRT is to drive. You might want to try a dry lake bed next time. Love the double back flip off the fence. Αωєѕσмє 🏆
Thank you!
Luv to see a top speed
Hello, what kind of motor and controller is that? Does it fit the original motor mount?? Greetings old school
Would love to see a top speed run. Keeping the nose down going to be tough though!
That's a slick set up Dude!! I want one so Baaaaaad. 😢
Like I said in the shop mod 1.5 and m2c center drive is a must now
Wow. That castle motor is beast w max5
love the vids. Can i special order a purchase and build with you ?
Were you still using the Traxxas stock gearing 20T pinion and 50T spur out the box🤔?
26/46 he said. It’s close to the speed gearing that comes with the XRT.
Little too much heat in her bud 😂
Pretty bad ass
Are there any fan mounts or cooling fand for the 1100kv setup on the xrt? Just wanting something to help with temps
Just use the stock fans and heat sink. I put the heat sink on a vice and used it to spread the heat sink open enough to slide the motor in. Then reinstalled the fans. Problem solved
I think you need a bigger boat. That is one massive over powered Truck
I reached full throttle with in my neighbors house tires expand fast😂
You need to go with WFO 1.5 steel mod spur and pinion gear combo. Anytime you mod up to a big motor, esc and battery combo you need to upgrade other supports like your gears, steering, tires and what not because you will break something on that truck because of so much torque and power that 5th scale motor is putting out. You can't even keep the front end down when trying to do a high speed pass because so much torque coming out from that motor when you barely throttle into it. If you do a high speed pass next time try switching to street tires and change your gearing.
Can the constant wheelies be resolved? it doesn't look fun as it is
Thin center diff fluid. Traxxas runs peanut butter center diff fluid in their bashers so they will wheelie.
The gear set your going to use as a replacement /upgrade is the Traxxas, 'Spur gear, 50-tooth (machined, hardened steel) (wide-face)/ gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw, MODEL# 6450' ?
Is that motor water proof?
What tires are those?
whats your punch at? those flips off the fence were sweet!
All default Hobbywing settings.
Where you go
same setup with 800KV CASTLE
How much to build me a XRT with massive 1100kv motor please let me know
It has too much power. Add some lead weight to the front and gear it down. That thing is crazy
It still wouldn't matter the torque from that motor will over power those lead weights
Like the car, but I think traxxas suspention stock (almost all the cars) way too soft for speed runs.
I want a XRT with all that power 1100kv motor and the extra stuff you put in the orange and black XRT please let me know how much it will have to pay for you to make it for me
If new that's prolly $1200-$1500 and maybe more with lipos and charger. He prolly has 2k in that rig with tires and all.
Take it to the skate park it send it.
My slash 4x4 is the same way lol
To break that easy for the cost of the car is absurd seems how it breaks with stock electronics
Typhon is speed king
I seen another video with the same problem and their was more damage. I guess you'll find out when you repair it.
Stop bumping it and do a very linear speed run
He reminds me of BLIPPI 😂
Fiyat nedir birtanede ben almak istiyorum
Standing backflips are from a complete stop
Try different differential
Car on first then remote 😅
If you would of stopped Poppin wheelies you could have done an actual full trigger pull
hobby wing esc are nuts turn punch down way better
he already said in one of the comments that he's got the settings at default.
Omg! A lil too excited. Lol obviously over powered. It's cool and all but I couldn't see myself enjoying something like that. How can it be fun when it wheelies all the time. Idk. Some people may like that but I'd have to gear it down just to enjoy it. Love the power but I like to rip without all the wheelies. That's just me.
Why doesn’t anyone try to follow their RC car inside of a real car?
You work at or own an RC store?!?!? 🥴
That's going to blow your diffs and other things if you go stronger gears😁
That motor is definitely not as smooth as it could be love that motor in my kraton 8s. Has way to much power honestly and goes a solid 78mph lmao
First time I've said this:
Too fast
i have a 6s kraton that dose the same thing on punch lvl 3 ..lol i can barely use all the trigger unless in loose sand or dirt.
that exposed rx renders the rc useless for this area
These are notorious for the spur gears just shredding just complet garbage it's to much power with those sticky tires it's just to much tork in them
great car but the power is literally not usable
My vote is for stock gears (whatever gear ratio you decide on)doing a high speed run. Great video.✌😁
Too much power can't have fun with it if it was me i run 6s
HAS NO SKILL DRIVING
stock gears are garbage cool vid tho
To much power. If you can't nail it with out wheels you have no control of speed..
Like an 8yr old boy lol
TO MUCH TALKING MAN
Crash Test Dummy 😂
that's a lot of unusable power.
Shur up broo, too much talking