I am having a problem. When I turn up my gyro, the wheel starts steering to the left even when at rest on flat ground. as I turn it down, the wheels straighten up. Do you know what can I do? Thank you! I also have the dumbo rc, it is paired with Tamiya TT02 Supra
So your using the DumboRc control with the X6FG Receiver. Have you calibrated your control with all end points set to centre? It's seems very strange, I'll work with you. Has this item been used before and has started randomly doing this?
@@mehimrc1314 Thank you for responding! I am very new to this hobby so trying to learn as much as possible. It is the X6FG, brand new controller and receiver. It worked right out of the box so I did not do any calibration. I just adjusted the steering trim slightly so the wheels point straight and the endpoints so the servo or the steering system is not stressed when the wheels are fully turned.
@@enayetkhan9397 so you've nailed how to save the servo, by adjusting the excess steering nice dude. So did the gyro work out the box as well? I'm tryig to figure this out...
@@mehimrc1314 Thank you! No, the gyro was turned off. So I did the three clicks on the small switch to turn it on. First, it was steering the opposite direction, so I pressed twice again to reverse it. As I start driving, It slowly starts veering off to one side with the gyro on. If I turn off channel 6, the car goes straight again. Am I supposed to do the calibration on the transmitter with the esc off? could that fix it?
@@enayetkhan9397 yeah the calibration is done with the ESC off with all end points set to centre Put channel 5 and 6 to max position. I know it's a pain for you mate but I find it interesting, so do the calibration and let me know what happens. Also make sure your channels 1 and 2 are set the neutral not reverse.
Mate, keep on ranting, nothing you said was untrue. I struggle to answer every comment, but I do try...and I think it's important. It really p***es me off when I comment on a video of a bigger channel than me, and they have like 30 or 40 comments, and I'll not get a response. It takes 10 mins or less to give a quick answer to 30 comments. There are some exceptions , like if it's a really complex question (I've been known to go off and do some digging and then answer stuff if I think it needs to be answered). I'll sit some evenings and rattle through 60-100 Comments sometimes. Anyway... you've got me ranting now! 10 Coffees coming your way mate for the informative videos. Keep it up!
Thanks for understanding the rant haha, the studio makes replying way easier. I've got to admit your answer to comment rate is through the roof. Top marks considering your level of production, not only do you answer but your willing to debate topics ect. WOW dude a coffee would of done Ten is crazy plus the massive shout out. Good to have a rant TomleyRc thanks man really appreciate all the support.
Both my cars were unusable with gyro turned up. Now I know why. They were steering the wrong way. Two presses on each receiver fixed them both. Thanks for the vid.
Hope your OK lad everyone loves a little rant every now and then keeps us whole.ive never had a reply from a massive channel I have had the odd heart or thumbs up but they don't share as that's not what they are about they want people to follow like minions in the hope they drivel out some snippet of useful information 😉 keep your chin up mate and put a jumper on its freezing 🥶
Hope your doing well dude, always nice hearing from you. Hey you had a warm day so this was my no jumper day. Another great observation by you, I guess your got the gist of the rant lol. Your bang on like dude.
Thank you for helping newcomers to the R/C world. You are helping promote the sport and you come across exactly how you said. Ihave a question about Dumbo rc X6, let me know what I am not aware of. My Yikong YK 4201 Pro need to engage the finger throttle trigger 2 times before it moves in reverse, is that X6 set up or that is how Crawlers reverse works?
Hitting the throttle twice is typically, first is to brake, the second is to engage reverse motor rotation. Generally that has nothing to do with the receiver. It's how you calibrate your ESC and whether it's has different brake set up functions. Thanks for your encouraging words really appreciate it.
Brilliant, Thankyou. Where did you purchase you blue DUMBRORC from, like the colour and finish. Been looking and can only find them for around £78 which is more than I can afford ? Keep up the good work, take care.
3 parts to this answer,, the Instructions play a part, but if it's not in there then it's a lot of time sat with the item. Going over and over untill I find a pattern and tbh mate somenthings you'll stumble across. The x6fg gyro I knew the fix but the x4 was found out of pure frustration.
Took alot of time to figure the X6F receiver out but that will add alot more turn to your car. As for the X6FG that was alot simpler to work out. I'm still working on an few more things with both receivers subscribe! So you dont miss it.
I totally appreciate you and the videos , I have 3 of these transmitter,, always find the answer to my ??? From your videos,,, for that thank you much...
Just tested out my new X6 yesterday on my 1/8 truggy. Loved the gyro acelerating to high speed,really stabilised the car. My problem is that with the gyro on my turning circle goes to shit. Goes from nice and tight to really wide. Hoping you might be able to help. Thanks
Press the set button twice on the reciever, the light flashes and should give a better turning circle. I know this works on the x6f receiver as I show in the video.
Thanks man much appreciated, any help you need leave a comment. If I've not done a video that helps I'll try work it out with you regardless, this hobby is all about helping each other.
@@mehimrc1314 well you earned a sub from me. I've caught a few of your vids and it's great to watch someone who gets to the point and actually provides useful information. You're a bit of a rarity. Thanks! ✌️💙
@@KurnoBucca I try my best to give us all better information, rather than every video seeming like a sales pitch/advert. Cheer for the uplifting comment
Lol I know exactly who u r on about in that video lol " it's just a toy " no mate is not ha ha ha I fully respect u more for this video pal I've tried get a question answered from the said person and nothing and u won't really unless u have a blue spanner I his live streams, brill video buddy u can't rant as much as u like buddy lol love it 🤣👊😉👍🤙
I do like a little rant there was a point to it. People pay good money for these "toys" Then you'll ask the main man a question but get nowhere, plus if you ask more than a few times your spamming! I get not all questions can be answered but yet again he repeats the same. This is my mug, I drink gogo berry Juice, Here's the monster truck. Time gloating rather than answering his fans questions, most of his feeds sound the same aswell. And There's another rant haha, cheers dude glad you seen what I was saying.
The press two times fixed my issue. I thought maybe it was orientation of the receiver or controller settings nothing was working. I wonder if this is caused by reverse steering setting on my radio (needed due to how the steering servo mounts in my truck).
First try rebinding the control to the receiver would be my first guess. I honestly could say unless the odd time it doesn't register the second press. Try pressing the button slower, still twice but accurate hits 🎯
I hve so much questions but doing my research I found alot of answers but question please please I want a dumbo rc transmitter but I really don't know what to set the knobs too I would really like to understand
Depends what your wanting to control, crawlers ect will use a 6 channel receiver better. But using knobs for servos could be tricky I'd keep them to switches such as channel 3/4 I've never found a use for the knobs other than channel 6 for gyro function. Sorry I can't be of more help 👍
I have the x6fg but I feel the steering is not enough, I hoped this video would answer it but the steering thing you showed is for non gyro. 3 times on the x6fg would just switch the gyro. no steering adjustment for x6g?
Sorry the notification hadn't shown, I've not looked into that issue with the x6f-G. I'd sure your trims are set and duel rates at 100% It's literally press once see what changed, press twice see what changed. Haha I got the second msg now also, hope what you found isn't a game changer.
@@coquirc4537 awesome dude glad this video was worth time go,go,go get them all tuned. And thanks for that bit information I'll go check it out. Stay safe and thanks for the support
@@mehimrc1314 but it is new transmitter. And do that with any receiver. Is easier to change position of steering direction. I was looking if there options to reprogram?
i tried pushing twice to no success. i tried again and again until finally get it. lol...why do i have to do multiple i dont know.. ita like hit and misses.. but its good now. thanks!
The buttons aren't the best so it could be the angle which your pressing, sounds crazy but trust me I've been in your shoes bro 👍 glad your sorted as such
@@mehimrc1314 Yes... well eventually the brittle button is broken now :) The black plastic can no longer be pushed. So I have to yank the switch component off the board. completely. For the time being, I just short the 2 contact pads with my metal tweezer to bind or mode hahaha... Maybe I'll solder 2 cables in the future. but its fine for now. thanks again
Hello,just got myself s Dumbo 6fg with led receiver and gyro ,my 5/6 channels have buttons rather than dials ,struggling to set up gyro .got it turned on on receiver .how do I adjust it .the instructions are shit
Erm buttons instead of dials for channels 5/6. Did the control come with the receiver? Sounds weird to me with out asking questions of my own. I'll help figure this out with you, also I believe your control is the dumborc X5 control?
Hey dude, from what I gather from pure guess work. The control and receiver don't match up. The receive has to be labelled (X6FG) and the control has to be the (X6) with dials not push buttons. The set up you have is better suited for a crawler with indicators ect. The push buttons on top are for extra lights to put on/off or configured however you'd like. But unfortunately you can't adjust those buttons as that's all they are on/off switches.
I bought it about a month ago ,I thought it was a x6fg,its what I paid for from banggood or wish ,can't remember right now ,paid about £60 ,led light kit and gyro ,it's got a blue wheel but the buttons for 5/6 ?,so you think it's a x5 transmitter with a x6fg receiver?.thanks for helping me ,really happy with range and LEDs ,il just have to buy a separate gyro ,any recommendations ,was going to try that gc301 I think it's called ,about £15 .can you buy cheap or has it got to be an expensive one for rwd drift
I believe the buttons on the control make it the X5, if your receiver says (X6FG) and you want gyro function. I'd buy the X6 control and check for dials not buttons befor buying. Banggood do get it wrong sometimes, I guess that's my recommendation as I don't know other brands to suggest unfortunately. The range on these controls is fantastic shame you got sent the wrong item without gyro.
So far my personal experience, YES if your gyro gain is 100% then the wheels tend to wobble. Testing a few things so I'll report back on this one stay tuned.
@@mehimrc1314 ok, I am running my 6 gyro on the 124019 without any gyro at all seems to be ok on its own. I do run another one on my redcat volcano and definitely have to trim that gyro way down. thanks
@@edwinnegron7761 you need to do the same on the 124, if your speed running then turn both the gyro and your steering duel rate down. This should help rain in the wobble, have a try let Me know how it looks and feels.
You can turn the control trim over from normal to reverse via to control. Or the other option is the turn the servo upside down and reattach the horn then extend the link. Hope that makes sense
@@mehimrc1314 not sure what you mean , the steering is the right way, but no matter what whay set the steering ,reverse or normal the trim dial is always the wrong way , ie car drifts right , you have to turn steering trim to right to cancel it out , rather than left like is normally the case
Hmmm I understand you better, that is an interesting thing to have noticed. To be honest I've never payed that much attention to notice the direction of the trim dial. As long as it's works why fix it? I totally understand what your saying now about the dial direction.
@@grrfy for me that way around works haha but everyone knows I'm backwards. If it drifts right then turn the dial right, I know it's counter intuitive and I don't know if there's a fix to that.
@@mehimrc1314 ohhh okay thanks for your fast reply and do u think with gyro is better for speedy cars that get uncontrollable ? and also aon the gyro one can i turn it off if i want to ?
It's a favourite for many RC enthusiasts (DumboRc X6 with the X6FG Receiver) you cant go wrong for what it offers, your more than welcome for the information if your not already subscribed then please do so..
I am having a problem. When I turn up my gyro, the wheel starts steering to the left even when at rest on flat ground. as I turn it down, the wheels straighten up. Do you know what can I do? Thank you!
I also have the dumbo rc, it is paired with Tamiya TT02 Supra
So your using the DumboRc control with the X6FG Receiver. Have you calibrated your control with all end points set to centre? It's seems very strange, I'll work with you.
Has this item been used before and has started randomly doing this?
@@mehimrc1314 Thank you for responding! I am very new to this hobby so trying to learn as much as possible. It is the X6FG, brand new controller and receiver. It worked right out of the box so I did not do any calibration. I just adjusted the steering trim slightly so the wheels point straight and the endpoints so the servo or the steering system is not stressed when the wheels are fully turned.
@@enayetkhan9397 so you've nailed how to save the servo, by adjusting the excess steering nice dude.
So did the gyro work out the box as well? I'm tryig to figure this out...
@@mehimrc1314 Thank you! No, the gyro was turned off. So I did the three clicks on the small switch to turn it on. First, it was steering the opposite direction, so I pressed twice again to reverse it. As I start driving, It slowly starts veering off to one side with the gyro on. If I turn off channel 6, the car goes straight again. Am I supposed to do the calibration on the transmitter with the esc off? could that fix it?
@@enayetkhan9397 yeah the calibration is done with the ESC off with all end points set to centre Put channel 5 and 6 to max position. I know it's a pain for you mate but I find it interesting, so do the calibration and let me know what happens.
Also make sure your channels 1 and 2 are set the neutral not reverse.
Mate, keep on ranting, nothing you said was untrue. I struggle to answer every comment, but I do try...and I think it's important. It really p***es me off when I comment on a video of a bigger channel than me, and they have like 30 or 40 comments, and I'll not get a response. It takes 10 mins or less to give a quick answer to 30 comments. There are some exceptions , like if it's a really complex question (I've been known to go off and do some digging and then answer stuff if I think it needs to be answered). I'll sit some evenings and rattle through 60-100 Comments sometimes. Anyway... you've got me ranting now! 10 Coffees coming your way mate for the informative videos. Keep it up!
Thanks for understanding the rant haha, the studio makes replying way easier. I've got to admit your answer to comment rate is through the roof. Top marks considering your level of production, not only do you answer but your willing to debate topics ect. WOW dude a coffee would of done Ten is crazy plus the massive shout out. Good to have a rant TomleyRc thanks man really appreciate all the support.
Do you mind saying what are those Tamiya wheels you have on your WLToys 12402-A? I asked on your video but never got an answer.
@@Molekulasti @TomleyRc I'm guessing, I don't own tamiya yack! Sorry Tomley haha.
@@mehimrc1314 Yes! I'm sorry. It's directed at Mr. Tomley. Love your videos, man. Thanks for all the tutorials.
Always turn back to this when I use a new rx. Thanks again!
I was told to do this video, who knew it would help 👍 I've had to watch it back myelf for easy reminder 🤣
Both my cars were unusable with gyro turned up. Now I know why. They were steering the wrong way. Two presses on each receiver fixed them both. Thanks for the vid.
Two shakes of a tail and your back in business, the instructions could be clearer oh wait they don't come with instructions 🤣
Honestly bro, with your accent I could listen to you saying Gyro all day long 😊
You'll hear gyro up here alot, but im talking about RC gyro haha.
I really like yr videos as it did explain what most of other channels dont bother going through. You have helped me many time thank you! 🎉❤😊
Thanks dude I appreciate your comment glad to help others out of a sticky RC situation 👍
I thought my receiver is broken.....thanks man,keep up with infos
Hopefully it's not broke now dude haha thanks for the comment and support.
Super helpful, thanks again man. Mine was turning into the turn and was super frustrating. You're the best!
Awsome, heading in the right direction now 👍
Hope your OK lad everyone loves a little rant every now and then keeps us whole.ive never had a reply from a massive channel I have had the odd heart or thumbs up but they don't share as that's not what they are about they want people to follow like minions in the hope they drivel out some snippet of useful information 😉 keep your chin up mate and put a jumper on its freezing 🥶
Hope your doing well dude, always nice hearing from you. Hey you had a warm day so this was my no jumper day. Another great observation by you, I guess your got the gist of the rant lol. Your bang on like dude.
Thank you for helping newcomers to the R/C world. You are helping promote the sport and you come across exactly how you said. Ihave a question about Dumbo rc X6, let me know what I am not aware of. My Yikong YK 4201 Pro need to engage the finger throttle trigger 2 times before it moves in reverse, is that X6 set up or that is how Crawlers reverse works?
Hitting the throttle twice is typically, first is to brake, the second is to engage reverse motor rotation. Generally that has nothing to do with the receiver. It's how you calibrate your ESC and whether it's has different brake set up functions. Thanks for your encouraging words really appreciate it.
Friend, thank you for the information, you have been very helpful.
Brilliant, Thankyou. Where did you purchase you blue DUMBRORC from, like the colour and finish. Been looking and can only find them for around £78 which is more than I can afford ? Keep up the good work, take care.
AliExpress should have colour choice cheaper too 👍
Thanks for this info and for your time. 👍🍻
Thanks for the comment and support dude. Good luck with your a959 and 144001 builds.
@@mehimrc1314 Appreciate it.
Just the answer I was looking for about the gyro. Many thanks indeed 👍
Appreciate you stoping by glad it helped
Keep doing you brotha. Real ones appreciate you. 👊🏼
Will do dude 👍
Very nicely explained . Nice one
Mr sausagewallet, much appreciated hope it helps you or others.
Great work buddy where do u get ur info as I use ur tips when need very helpful as I don't read instructions and I'm garthing u do read them
3 parts to this answer,, the Instructions play a part, but if it's not in there then it's a lot of time sat with the item. Going over and over untill I find a pattern and tbh mate somenthings you'll stumble across. The x6fg gyro I knew the fix but the x4 was found out of pure frustration.
@@mehimrc1314 fair play dude legend 👍
Took alot of time to figure the X6F receiver out but that will add alot more turn to your car. As for the X6FG that was alot simpler to work out.
I'm still working on an few more things with both receivers subscribe! So you dont miss it.
Nice one fella that’s what happened to my x4, been in shed since I got x6. Result.
Well bring the X4 out of retirement haha, thanks for comment.
@@mehimrc1314
Yeah that’s why I was so happy, got a new wpl c24-1 with metal upgrade two day’s ago. Dunno if it will fit but🤞
@@Jim-jx6xs well this is a pure stroke of luck haha, hope all it all fits mate.
I totally appreciate you and the videos , I have 3 of these transmitter,, always find the answer to my ??? From your videos,,, for that thank you much...
Cheers dude nothing worse than ??? Being stuck in your head with no answers. Appreciate your comment bro
We need more information like this! Thanks.
Couldn't agree more dude, thanks for the comments and support.
This has been useful again,wish I
had a memory!
It's all good that's what video was made for repeats 👍
Great video, lv the detail. Well done ! 😎
Thanks I hope it was understandable and fixes any issues people may have.
Thanks a ton. I could not figure that out at all
Just tested out my new X6 yesterday on my 1/8 truggy. Loved the gyro acelerating to high speed,really stabilised the car. My problem is that with the gyro on my turning circle goes to shit. Goes from nice and tight to really wide. Hoping you might be able to help. Thanks
Press the set button twice on the reciever, the light flashes and should give a better turning circle.
I know this works on the x6f receiver as I show in the video.
Thx for the Video 😎✌🏻 Lg Max
All good Max thanks for the view and support.
Would love to see your channel go thru the roof your extremely helpful and i need all i can get
Thanks man much appreciated, any help you need leave a comment. If I've not done a video that helps I'll try work it out with you regardless, this hobby is all about helping each other.
Awesome info on X6F... Honestly had no idea! 🤷♂️👍
Consider yourself informed haha, yeah the X6FG has good features.
@@mehimrc1314 well you earned a sub from me. I've caught a few of your vids and it's great to watch someone who gets to the point and actually provides useful information. You're a bit of a rarity. Thanks! ✌️💙
@@KurnoBucca I try my best to give us all better information, rather than every video seeming like a sales pitch/advert. Cheer for the uplifting comment
Great info.
Thanks dude much appreciated and for the sub Epic! Man
Thanks man. The manual on these is sparse.
You ain't wrong man, thanks for the comment
Lol I know exactly who u r on about in that video lol " it's just a toy " no mate is not ha ha ha I fully respect u more for this video pal I've tried get a question answered from the said person and nothing and u won't really unless u have a blue spanner I his live streams, brill video buddy u can't rant as much as u like buddy lol love it 🤣👊😉👍🤙
I do like a little rant there was a point to it. People pay good money for these "toys" Then you'll ask the main man a question but get nowhere, plus if you ask more than a few times your spamming! I get not all questions can be answered but yet again he repeats the same. This is my mug, I drink gogo berry Juice, Here's the monster truck. Time gloating rather than answering his fans questions, most of his feeds sound the same aswell. And There's another rant haha, cheers dude glad you seen what I was saying.
Thanks, this is definitely useful.
Awsome dude glad it's come in useful
good info ill try it on my dumborc thanks
Thanks dude
The press two times fixed my issue. I thought maybe it was orientation of the receiver or controller settings nothing was working.
I wonder if this is caused by reverse steering setting on my radio (needed due to how the steering servo mounts in my truck).
Glad it helped and i can't fault your thinking, makes perfect sense as to why the gyro might be backwards 👍
I have an x6DC(G). For some reason when I press the gyro button 2x. It will not reverse gyro. Any ideas. Thank you for all your helpful videos.
First try rebinding the control to the receiver would be my first guess. I honestly could say unless the odd time it doesn't register the second press.
Try pressing the button slower, still twice but accurate hits 🎯
I’m watching a second time! I need to write this down! Thanks!
Videos are made for that reason great to hear 👍
I hve so much questions but doing my research I found alot of answers but question please please I want a dumbo rc transmitter but I really don't know what to set the knobs too I would really like to understand
Depends what your wanting to control, crawlers ect will use a 6 channel receiver better. But using knobs for servos could be tricky I'd keep them to switches such as channel 3/4
I've never found a use for the knobs other than channel 6 for gyro function. Sorry I can't be of more help 👍
Awesome 😎
Great video 👍👍👍
Thanks dude hope it helps you or someone.
I have the x6fg but I feel the steering is not enough, I hoped this video would answer it but the steering thing you showed is for non gyro. 3 times on the x6fg would just switch the gyro.
no steering adjustment for x6g?
Oh and thanks for the info just sad the answer to my issue I thought I had found actually is not 😭
Sorry the notification hadn't shown, I've not looked into that issue with the x6f-G.
I'd sure your trims are set and duel rates at 100%
It's literally press once see what changed, press twice see what changed.
Haha I got the second msg now also, hope what you found isn't a game changer.
Great info mate, thank you.
More than welcome and much appreciated comment my friend
Nice to know, i have 2 x6s and yeah i have that issue. Ill definetly fiz them now, thanks!
Oh and by the way, there is an adjustable mount made for 144001/124019 now
@@coquirc4537 awesome dude glad this video was worth time go,go,go get them all tuned. And thanks for that bit information I'll go check it out. Stay safe and thanks for the support
@@coquirc4537 possible link to the mount, can't find it other than the 550 motor mount.
@@mehimrc1314 its on Aliexpress im trying to post the link here as a reply but it keeps giving me an error
US $2.84 18%OFF | Alloy machined adjustable motor mount for rc hobby model car 1-14 Wltoys 144001 buggy option parts hop-ups
I bought x6 recently and found that servo is going wrong direction, however switch on remote is in correct position.
Yeah it will do that, is it possible to flip the servo over, and readjust the steering link.
@@mehimrc1314 but it is new transmitter. And do that with any receiver. Is easier to change position of steering direction. I was looking if there options to reprogram?
Didn't read that part sorry, NO unless you take apart the control and rewire the steering, dumborc are a little dumb in this area.
Tank you so much sir...
Sir wow feel blessed haha your welcome 😁
Can I fit to a tank with hobbywing 0880 true left and right on the tracking
Dont fully understand you, you can use the dumbrc on tanks and many other RC's.
@@mehimrc1314 thank you
Hello can You help me i get one car and and I can't put the suspension right
Not alot of info as to what your problem is dude sorry.
i tried pushing twice to no success. i tried again and again until finally get it. lol...why do i have to do multiple i dont know.. ita like hit and misses.. but its good now. thanks!
The buttons aren't the best so it could be the angle which your pressing, sounds crazy but trust me I've been in your shoes bro 👍 glad your sorted as such
@@mehimrc1314 Yes... well eventually the brittle button is broken now :) The black plastic can no longer be pushed. So I have to yank the switch component off the board. completely. For the time being, I just short the 2 contact pads with my metal tweezer to bind or mode hahaha... Maybe I'll solder 2 cables in the future. but its fine for now. thanks again
@@arievianza brother your a man of my calibre, great reading how your over come the problem 👍 any time and happy bashing
Hello,just got myself s Dumbo 6fg with led receiver and gyro ,my 5/6 channels have buttons rather than dials ,struggling to set up gyro .got it turned on on receiver .how do I adjust it .the instructions are shit
Erm buttons instead of dials for channels 5/6. Did the control come with the receiver? Sounds weird to me with out asking questions of my own. I'll help figure this out with you, also I believe your control is the dumborc X5 control?
Hey dude, from what I gather from pure guess work. The control and receiver don't match up. The receive has to be labelled (X6FG) and the control has to be the (X6) with dials not push buttons. The set up you have is better suited for a crawler with indicators ect. The push buttons on top are for extra lights to put on/off or configured however you'd like. But unfortunately you can't adjust those buttons as that's all they are on/off switches.
I bought it about a month ago ,I thought it was a x6fg,its what I paid for from banggood or wish ,can't remember right now ,paid about £60 ,led light kit and gyro ,it's got a blue wheel but the buttons for 5/6 ?,so you think it's a x5 transmitter with a x6fg receiver?.thanks for helping me ,really happy with range and LEDs ,il just have to buy a separate gyro ,any recommendations ,was going to try that gc301 I think it's called ,about £15 .can you buy cheap or has it got to be an expensive one for rwd drift
I believe the buttons on the control make it the X5, if your receiver says (X6FG) and you want gyro function. I'd buy the X6 control and check for dials not buttons befor buying. Banggood do get it wrong sometimes, I guess that's my recommendation as I don't know other brands to suggest unfortunately. The range on these controls is fantastic shame you got sent the wrong item without gyro.
have you seen that if you turn the gyro all the up, full power the wheels get extremely wobbly? Is that normal to anyone else???? thank you
So far my personal experience, YES if your gyro gain is 100% then the wheels tend to wobble. Testing a few things so I'll report back on this one stay tuned.
@@mehimrc1314 ok, I am running my 6 gyro on the 124019 without any gyro at all seems to be ok on its own. I do run another one on my redcat volcano and definitely have to trim that gyro way down. thanks
@@edwinnegron7761 you need to do the same on the 124, if your speed running then turn both the gyro and your steering duel rate down. This should help rain in the wobble, have a try let Me know how it looks and feels.
@@mehimrc1314 will do charging batteries up now....thank you
is there a way to make the steering trim not backward? mine is backwards, although I dont remember it being backwards before ?
You can turn the control trim over from normal to reverse via to control. Or the other option is the turn the servo upside down and reattach the horn then extend the link. Hope that makes sense
@@mehimrc1314 not sure what you mean , the steering is the right way, but no matter what whay set the steering ,reverse or normal the trim dial is always the wrong way , ie car drifts right , you have to turn steering trim to right to cancel it out , rather than left like is normally the case
Hmmm I understand you better, that is an interesting thing to have noticed. To be honest I've never payed that much attention to notice the direction of the trim dial. As long as it's works why fix it? I totally understand what your saying now about the dial direction.
@@mehimrc1314 will have to trim it coming towards me else keep forgetting
@@grrfy for me that way around works haha but everyone knows I'm backwards. If it drifts right then turn the dial right, I know it's counter intuitive and I don't know if there's a fix to that.
so which one is better for my High speed a959b ? the X6F or the X6FG ?
DumboRcX6 X6FG.... The (G) is gyro... If it's X6F you'll have no gyro.
@@mehimrc1314 ohhh okay thanks for your fast reply and do u think with gyro is better for speedy cars that get uncontrollable ? and also aon the gyro one can i turn it off if i want to ?
@@lf8301 yes the gyro helps for speed running, the gyro turned up is fun for drifting ect. Also yes you can turn the gyro off with channel 6 dial.
@@mehimrc1314 ohh okay, thanks a lot for the information. I guess this is gonna be my new rc controller then :D
It's a favourite for many RC enthusiasts (DumboRc X6 with the X6FG Receiver) you cant go wrong for what it offers, your more than welcome for the information if your not already subscribed then please do so..
How to reverse the steering direction
On what X4 or X6FG? You can reverse steering both on the control.
@@mehimrc1314 I found out that there's a switch. Pretty damn simple. Thank you
@@mehimrc1314 keep up the nice work
@@disassooriyarachchi9655 haha there you go dude flip that switch.
@@disassooriyarachchi9655 trying to dude thanks for the support
Do the X6F have gyro?
The X6F receiver doesn't have the gyro, the X6FG has the gyro.
@@mehimrc1314 oh ok i kept getting confused with the names
@@imRedrich it's an easy thing to happen unfortunately lol have a good one bro.
@@mehimrc1314 ok bro tnx for the time :)
can the x6fg controller run w/ a x6f receiver?
Yes just bind as normal 👍
Hi do you know how reset the resiver? My lights wont work properly my gyro works
Press and hold the set button untill lighters flash. This should reset the receiver, turn control on and rebind the control. Hope this helps 👍
Tnx i all ready figure out.. thank you so much
Comments are running late sorry to not of seen this sooner. Glad your up and running again
Its ok ... keep it up...