How to read and write a Bosch EDC16 ECU using BDM100: Read description before watching or commenting
HTML-код
- Опубликовано: 25 авг 2015
- A guide detailing opening the ECU, connecting the BDM adaptor and reading and writing the ECU within the BDM software. The video shows how to use the original EVC BDM100 tool with a spring probe, and also how to use the chinese BDM100 tool with a soldered connection.
Update 1: This is an old video now, and we actually don't recommend the soldering technique, it's better to spend just a little extra and get the spring probes and a positioning frame, this reduces the risk of damaging the ECU. It's very easy to pull the pads off of the board.
Update 2: The Kess V2 does a very good job of programming the EDC16 over the OBD port, so you don't necessarily need to remove and open the ECU any more. At the time of making this video most tools were unstable over the OBD method and this is why we made this video.
Update 3: For bench programming it's better to use a tool which does not require the ECU to be dismantled such as PCM Flash or Combi loader.
Vehicles with the Bosch EDC16 which we cover are:
Peugeot/Citroen/Volvo/Mini/Ford 1.6 16V (EDC16C3 & EDC16C34), 2.2 170 (EDC16CP39), BMW 2.0 & 3.0 Diesel (EDC16C31).
Check on our website for full details www.hdi-tuning.co.uk
If you're in need of high quality remap files check out our tuning file portal dealer-tuningfile-portal.hdi-... Авто/Мото
Enjoyed your video mate. Keep it up!
nice job mate verry clear and good example and full English too :)
Great video keep up the great work
great explanation man!
Harikasin dosdum ellerine sağlık 🏅🏆🛠👍
Nice video MSN!
good diagnostic amigo excellent
Good job, très bonne vidéo concernant les méthodes pour ouvrir le boitier de gestion, lire et écrire à mettre en œuvre sur les EDC16C34....
Great work
When soldering always remember that solder will creep TO the heat i.e. your solderingtip. It's best to apply a little solder to your tip and hold the tip on one side of the object to be soldered and apply the solder on the opposite side.
Nice information
how much current need to put on ecu?
because by you diagram no read +12error
Excellent Video!, just wondering what the software is that you use?
Brilliant just brilliant
Good thank you.
Nice video
Hi, I have a Question please answer me - Which Clone or generel is good for OBD Tuning ecu Kess V2 or MPPS V18 ?and the differece Ktag ??when I need Ktag ??
Hi Steven, very nice Video!!!
Did you work with EDC16CP33 (Opel Vivaro, Renault Trafic 2.0 DCI, Motorcode M9R, 114HP ) ?
worked for me. Thank you :)
So far searching the net BDM100 is mainly used for Diesel cars.Can you use it on any type of car?and if not,is there any other programmer that will do the job?
Thanks
Is this a procedure with these tools you can use to clone the BMW ECU/DME as well?
good job
How to read and write full map ECU BOSCH MP5.2? and what kind of tool will be use to do it?
Muito bom👍
Nice Video, it already helped me a lot. thank you. One thing i still haven't found out is how do i identify which EDC version my ecu is/has?
Search the hardware numbers, or open the lid and look after processor. Edc15 is c167, 16 is mpc, 17 infineon
AWESOME THANKS ALOT
first you placed red stripe to the left (from your position) and when soldering to the right... how to know which one is correct to avoid frying ecu? :(
yt2011F both are different tools. One is the proper bdm from evc, the soldered connection is the cloned cheap tool from eBay. It's actually dimsport 555pro a complete different tool.
Hi
I have a clone bdm100 without Bosch frame.
My ECU os edc16c3. Can i read and withr without Bosch frame?
excellent video , do you have any recommendation for power supply to be use for ECU power ?
Most likely any 12vdc power supply. Most home internet routers use a 12vdc power supply. Find an old one that you don't need, or that someone has junked.
Cut the cord that you would normally connect to the router, (unplugged of course or you will get shock 🌩 😲 yourself, catch on fire 🔥 and possibly die 💀).. Separate the wires and then plug it in, next get a multimeter set to VDC identify + and - wires.
@@chrisd1828 Or the power brick always has the output voltage molded into tiny letters on the case of the plug/wall wart to tell you what is up.
Hi are the tune maps in the EEPROM as well? What is in the flash memory? And is there a way to read the firmware from the chip?
Where did you get your bdm100 frame?
Goog job.
HI where i can buy this BDM 100 universal programmer and OBD II cable ???
Hi thanks for a very informative and practical video
Can you assist with dpf and egr delete
steve !
mesela bir komatsu ekskavator için ecu bosch marka
bu programın içinde aynı yazılım varmı.
hepsi için uyarmı
birde kullandığın aparatların soketlerin adı nedir ?
Is it possible to set speedlimit with this gear ? lets say I want the car only to be able do drive 40km/h... ?
OK.Loved the video. very clever.. lots of information.
One criticism [only small]. You should solder ON the same way you soldered OFF ie. by applying the solder directly onto the joint...not bring the solder to the joint on the iron.. it gets what we call icicles' which don't stick and go crystalline..
One thing you didn't really delve into was the advantage of downloading the ECU data and tuning it as opposed to the standard OBDII port method. ie. what am I getting extra that I might want?
bicanoo_ma
You mentioned connecting to the ECU with an MPPS, is that possible?
Would it work without soldering ?
Nic job
Hi !
I have vw jetta 2012 TDI
can you help me remaping 2MB flash (delete EGR,DPF,catalytic convertor) ?
Thanks. ..
It is no way to delete the converter friend since exhaust gas runs trough it :) . The only way is to delete your car :) .
nice job,,,,
What software u using?!!
Can one retrain a 2004 Honda Odyssey ecm with this method and if so can one retrain the ecm to forget about the transmission so it may run successfully as if it had a manual transmission??? Also to trick the ecu to not rev limit before v-tec engauges so that you get the full power band?? I am buying a ecm training module that is similar to the one used here and I want to know before I put in investable money further into this tech
The ecu SID803 peugeot 407 2.0hdi 100kw can be reprogrammed only with bdm100 or even via. Obd? Thank you
شكرا جزيلا
how can you tell if the bdm100 you want to buy is 'legit'... also are there various pogo probes available for different ecus? are they different for CAN-BUS vs K-Line?
The real bdm is around 700 euros plus tax, the fake bdm is 10 euros 😉
The real bdm from EVC is awesome, I've had mine for probably 7 or 8 years now and I use it several times most days. Best money I ever spent.
Does this tool reads the Delphi DCM3.2AP? Thanks
Hi is it possible to change manual ecu to automatic for vw Passat 2006 model?
so actually the kess v2 does the same whiteout opening the ECU that right ?
8100rpm No you actually have some disatvantages in programming
Kess works good but not at all ECU types, for that u need to use Ktag with BDM.
hi ,is the pin out used all of 10 pin for ME9+Ecu ( i see EVC page #5, ME9 &EDC16 as same and 10 pin without pin# 3 & 4) , in your Video connection to all 10 pin?
i read ecu with K-tag without PIN 3&4 all fine but can"t read EEPROM in Bosch bmsk-p (ME9+)
All time Error connection with BDM100 chines clone , so what is correct pin ? Thanks
can you please show me how to line up edc 16c2 from citroen jumpy 2005 ?
hi i have an edc16 ecu from a kia sorento and i purchased the evc bdm100 (original not clone), can you code injectors using this because i thought it would have come with the full software for doing this but so far i have been unsuccessful...
i need the info for my car dodg journey 2000 diesel 103 kw
Good
hello
i went to volvo bus cluster meter repair in all file not open and show on display check data link broken message
can you please put a video on how to use FGTECh Galletto and how to Read Modify and Write ECU Files ?
This work in SCANIA truck G420 TO? :) please need help!
Hi
I have a bad ECU edc16c3.
With bdm100 its possible a full backup and install it at new ECU ? Or i need to do more things ?
what is the software used?
Bonjour merci pour ta vidéo 👍, je possède un renault megane 2 1.9 dci 130 de 2006, j'ai récupéré une map modifié mais quand je veux l'injecté avec mon galletto ça ne fonctionne pas, on me dis qu'avec mpps c'est OK ? Mes codes injecteur et anti démarrage ne seront pas perdu si je fais ça ??
Merci de me répondre please
Got here because of my Ford Focus RS MK2 :)
pls how can i buy this set of tool
Hi
Which program i should use to remove for example chain tensioner SELENOID or SAI or rear o2 sensor in audi a4 b6 1.8t?
If you have to ask that, you shouldn't be attempting it.
any ecu can read like that??thnx
I had a car the Volvo S80 can not be fired, he said workshop volvo ecu is broken, I askfor your help if they can correct me from Indonesia
Yes I cant have a look if you still have this?
Hello there, i'm planning to have a business in ecu remapping, can i ask if where do get the remapped flash file, for example an dpf and egr delete tune. TIA
so mppsv16 can read and write edc16 via odb?
can't solder at all , any other tips got a broken edc16
What about cutting around the glued edge with angle knife/ box cutter once the corner is started?
On certain ecus the glue is much stronger, so you will need to carefully do this with a Stanley knife, but on this example it has the weak light grey glue so it was easy to open. Typically on vehicles where the ecu is exposed the glue will be much much stronger for example the older berlingo vans where the ecu can get wet.
clear micro jajajajaj I
i have an ED0062 CR3.13 2.2L Star A 6461532079/Bosch 0281011158
with a DTC 2339/2347"Check variant coding cheksum data faulty control unit eeprom
error AT has been coded as MT - belongs to a E-220CDI/2005.
what do you recommend ? throw it to the fish ? ;)
hello ,,, reading and writing the ECU within the BDM software same it ...without needs another device ,,,,only one device BDM100
Can I modify ecm 4 cylinder to 6 cylinder?
no, just 8 to 6
he man when you used the BDM100 from ebay on the ecu you have solder 10 pins plug without space so evc mentioned that the pin 3,4 ,13 and 14 are not used how you can read the ecu
Hi thanks for this explanation actually I have écu for my motorbike you doing for motorcycle as well ?
Can you repair my Fiat Stilo ECU?
Are you a certified trainer or coach ?
is that clone BDm100 chinese ?
can you repair tv color , modern type, with remote control?
hahahaha
Hi. Can this same thing be done with Kess or only with bdm100, as I need a to be able to have 100% access just as T4 does for MG/Rover. I'm looking to programme my ECU for when the alarm goes out of sync. Thanks Pòl
Kess KTAG is the equivalent of bdm100 with more capabilities
do you perhaps have a ebay link to a trusted seller of the bdm as well as the adapter stand? my soldering sucks.
+Dominique van Wyk I don't link with any of the eBay sellers, you'll just have to check their feedback. I found that all of the tools are the same and come from the same factory, you just pay a different price.
+Steve Lewis hello can you call me please I live in Paris at France thank you
How should you reseal the Ecu?
Vw b5 81kw 1997 1.9tdi where to get good remap file.i have KESSv2 kwp2000plus only
Hi Steve, I sent you my control unit a few months ago and you programmed me your stage1+ including egr deactivation, what can I say, I've now driven 10,000 kilometers, the consumption is around 5.1-5.4/100km depending on the situation Driving style, it runs great, thank you very much! Greetings Heinrich
And you pay how much for this?
Perfect lll
this is the original BDM or china version ?
The guide shows how to use both the original EVC BDM100 tool and also the cloned china tool (actually the Dimsport 555pro, not a BDM100).
hello for a wrong engine reprogramming send the program file in the external flash?
I am repair the Ecm imoblizer and key looking and reset the car
Why dont you use MPPS? I assume it reads and writes as well - what is the difference?
+Dimitry Linnik Because with mpps you read 1/2 of the file and if during writing ecu died , you dont have any backup.With BDM you can clone in FULL ecu.If sometime is needing to swap ECU you can do it for 5 min.
Without learning keys ex...Only Mercedes is a problem because BDM pins are in oposite side of the board.
+Nikolay Nikolov what about SIPM SMPS clone if you know it, is there any noticed problem?
+Khaled Benloucif (Kikou Ben Kooker)
All obd flashers are not 100% secure. And with flashers you cant have eeprom to all edc16 ecus.So for edc16 the best is BDM read.
You can read and write obd 1000 cars with no problem, and 1001 maybe will die during the process.
We have a meter shop I have learned ECM meter how can you explain me
Hi, can you please send me the diagram of ecu pinout?
what is program ecu with MPPS?
Dear sir,
which device is connected between ECU and Laptop??
From where to buy
and also which software is used to Read and Write it??
Hi, do you cloning ECU S320 Benz how much does it cost
Hi, What is the model of the ecu?
Hello!
can I flash edc16cp33 ECU with this BDM100 ? I wrote the ECU with mpps ,and some error comes, now don't start the car.............or just KTAG good this work?-thanks
thomas Admiral Hi, It's important you stop now before you damage beyond repair. If you can get a full bdm read using this tool or a kess ktag, then I can repair the file for you. Very important that you don't attempt to program anything over bdm without first making a full backup, the OBD file you have is half blank so it's very important not to use that over the bdm 100
hm.thank you so much,,!
Then first open it the ECU, read BDM-port with Ktag or BDM100.--another forum told me,for my ECU don't good the BDM100 tool!-can this be true?
The mpps don't create a backup file on my laptop?
ruclips.net/video/11dV0OVCRFw/видео.html
how did he do it?
I never saved my eeprom before I did diesel scandal fix :(:( now my car sucks !!! would you have a placer where I could find eeprom that would work with my car ? or should I downgrade diesel scandal software first ? in that case how in hell do I do that ?! ?! ? please help !!!
i put the fizical eprom to another ecu, ecu ho is identical model, the car works ok, if dont work with eeprom move, put the flash .
Hey 😁☺️🙏
Can ask u some questions !? Please
i desamble it from the car, read erase and write till you get it open from aluminion housing
What’s price on this tool
Hello sir is it read Bosch ME17.0.1
Hyundai Genesis 4.6 L 2008
genessis is not of the list on ktag or kess