ECU read with Ktag, Galletto and BDM 100. you will not believe the result! Bosch EDC16

[@mariantiugan9379]

Hi very good video and usufull, i d'ont understand HOW you conect to power suply your galetto i have mine fb54 reworked - what power supply you use ? wires? maybe you have un link to bayed this conectors/wires/adapoters - thx

[@djjaskolmechanik3509]

Why can Fgtech Galleto be damaged when powered from the socket in the housing? Great movie regards 🙂

[@YOYODiagnostic]

Hello.
in 2013-2014 when I bought it I tried 3 times on an Renault EDC16 and the same number of times I burned Bipolar Transistor BC337.

[@thebook2109]

thanks !!!

[@rmt5820]

Hi and thank you for your useful video! My oem Ecu is Sagem 3000! I want to if there is any way upgrade this Ecu with change upgrade eeprom or some chip? I saw some of ur videos it seems ur expert on this job.

[@Unbekannt-ov5gb]

Danke sehr gut 👍🏼

[@mohamedbouabsa3493]

Thanks man

[@YOYODiagnostic]

Thank you for viewing. 😊

[@rsporsche]

Can you link the BDM100 rework video? I searched and couldn't find it

[@fordfocusgarage2083]

Good video thank you👍

[@YOYODiagnostic]

Thanks for watching. 👍

[@JerryPrado]

Nice, thanks. Is there a video on the BDM100 rework yet?

[@YOYODiagnostic]

Hello,
No but maybe I will do one.

[@gameiro59]

Hello, did you rework the BDM100?
I'm asking because one year ago you tried it with Dimsport and didn't work, but now with CMD technologies it manages to read Bosch EDC16.

[@jonaskaae7881]

no update?

[@crosskicker5346]

hello mate,
can a BDM100 or Ktag read a bmw bike ECU without opening the case, i mean can one these device or others can read a ECU throught the ECU connectors side? if not how can i read it using ktag or bdm100? thank you.

[@YOYODiagnostic]

Hello.
No is not possible. Kt200 or Dfox can do this job.

[@djbertinho1984]

Hi
I have a bad ECU edc16c3. PEUGEOT 307 1.6 HDI 110HP 2004
With bdm100 its possible a full backup and install it at new ECU ? Or i need to do more things ?
My bdm100 dind come with Bosch frame.
Can i solder small pins and just plug the cable or need to mod something ?
Thanks for your help

[@YOYODiagnostic]

Hello.
At first there were no BDM frames, everything was done by welding the cables. It is possible but you need to know pinout at each, or the simplest use the pins that come with BDM and weld them after connecting the cable that comes with BDM in the package.

[@brianshuker-wstf]

Where did you buy the bdm bench from thanks great video m8

[@YOYODiagnostic]

Hello.
To be honest I don't remember, probably from AliExpress or eBay.
Almost all sellers are equally liars.
You need to consider changing all the chips to be functional.

[@othmaneelkihel2930]

Hi can I have the software for bdm100

[@battyroshko1431]

Can you recommend the FGTech Galletto for a first time user?

[@YOYODiagnostic]

I don't recommend you to use clones but if you want a good clone go for KT200 or Fox Flash

[@legin3753]

👌👌👌👌

[@YOYODiagnostic]

Thanks 👍

[@user-tl9uh6rh4n]

👍

[@YOYODiagnostic]

👍

[@florentbr83]

Great! How did you fixed your BDM100? What was the issue?

[@YOYODiagnostic]

Hello.
I will post a video with this programmer on how to fix it. Thanks for watching.

[@bartqch]

@@YOYODiagnostic i cant see this on your video

[@autotechnikertt]

is the adapter for BDM 100 clone and ktag the same or are the pinouts diffrent >

[@YOYODiagnostic]

Same

[@autotechnikertt]

Thanks . Also med9 ktag reads 4k file .

[@emiliocerda2068]

I have a clone ktag and I would like to read it without the bdm is it possible?

[@YOYODiagnostic]

Hallo.
Ktag can not read true the OBD

[@emiliocerda2068]

Which clone tool do you recommend for a low price to do this job?

[@ermirseriani7717]

hello master,how are you,i want to ask you ,i am thinking to buy an expensive tool maybe for me}, i do not know which one by autotuner and flex,help me choose please

[@YOYODiagnostic]

Hello.
Flex is very ok and has very good customer service. I've been using it for almost 2 years and it works great.

[@ermirseriani7717]

@@YOYODiagnostic you saying that more better flex (online or offline mode )should i chose

[@ermirseriani7717]

?

[@YOYODiagnostic]

@@ermirseriani7717
this is just my opinion.
for EDC 17 has online checksum correction. the function is very useful

[@ermirseriani7717]

unbeliveboll

[@YOYODiagnostic]

👍

[@mmfix3851]

Question do you know ktag can read the CPU tricore tc1796 but only chip? I mean if i remove the Chip from board?

[@YOYODiagnostic]

Ktag is designed to read only from the ECU. Unfortunately it does not allow this function to be read separately from the ECU. I am convinced that there are programmers who can do this.

[@mmfix3851]

@@YOYODiagnostic Do you know some programmers or info. Because for more easy jobs probably is better to read the Chip itself than to have boards without pinout schematic.

[@YOYODiagnostic]

@@mmfix3851 I don't understand why you want to do this. First of all, in order to do this, you have to apply a high temperature for a long time. Chances are you'll burn that chip, and let's not forget that there are 2 types of chips, the one with external legs and the one without. It is very difficult to put a chip in the perfect position. To do this is the same for you if you try to read 15 ECU. If you only refer to Eeprom memories it is ok.

[@mmfix3851]

​@@YOYODiagnostic for me the soldering is not a problem 15+ years repair Phones and laptops just now starting to work on cars but im super newbie but i see there is some ECUs can be read and other with the same processor can not because there is no pin outs information. Thats why i ask if there programmer that read the chip itself. check my about me and coonttact me.

[@YOYODiagnostic]

@@mmfix3851
👍

[@Salman-sc8gr]

Will BDM100 work on cloning Peugeot BSi?

[@YOYODiagnostic]

Hello.
No

[@Salman-sc8gr]

@@YOYODiagnostic thanks, so which programmer will ork on Bsi for Peugeot /Citroen?
And another? The Petrol ecu Bosch ME7 4.6 on v6 after driving starts misfiring, can BDM delete immobiliser so I can use another ecu?

[@YOYODiagnostic]

@@Salman-sc8gr
For BSI you need a programmer who reads Eeprom. it can be from 20 euros to 1000 euros, it depends on what you want to buy. BSI at Peugeot can be read through Eeprom.

[@Salman-sc8gr]

@@YOYODiagnostic thank you.

[@YOYODiagnostic]

@@Salman-sc8gr 👍

[@hardfixintosimple]

Hi. Is these hardwares are clones from china?

[@YOYODiagnostic]

Hello. All Clones are from China. 👍

[@tirannozavr2093]

@@YOYODiagnostic Hello! I have galletto like yours, but the program closes after selecting MPC 55x/56x and clicking OK. I don't understant why ?

[@YOYODiagnostic]

@@tirannozavr2093
Software Problem.

[@piovo5222]

for reading edc17 is KTAG Clone good?

[@YOYODiagnostic]

not really . I recommend Autotunner

[@piovo5222]

@@YOYODiagnostic I only need it for reading maybe once or twice a year, for my car and other personal cars? The ecu edc17cp02

[@YOYODiagnostic]

@@piovo5222
Use scanmatik whit PCM Flash software, is cheaper than Autotunner

[@piovo5222]

@@YOYODiagnostic this is cheapest way to read and write on bench?

[@henryford4337]

Hello, Thanks For All The Helpfull Videos.
Is there any programmer that can read Saturn Bosch 0261 204 591 ME3.1 Ecu.
Thanks

[@YOYODiagnostic]

Hello, I have no experience with this car. I don't want to tell you something wrong.