How To Make Double Action OTF Knife!Wooden Automatic Knife!
HTML-код
- Опубликовано: 14 апр 2021
- Hi friends. Today I will show you how to make an automatic knife from the last video from ordinary rulers! Also for those who have not watched the previous video, I will briefly show how the mechanism works. Follow the link to download a drawing of this knife and make it at home! Wear personal protective equipment when working with the tool.
Template - / @makemania778 
Развлечения
![Roddy Ricch - Survivors Remorse [Official Music Video]](http://i.ytimg.com/vi/J5IeFzr2GgE/mqdefault.jpg)
Just the pocket tool I needed against vampires.
Vampires isn't real.They can not hurt you
@@mienvu5814 /whoosh
Classic ! I’m positive Van Helsing would approve .
@@mienvu5814 that’s what a vampire would say
@@Balandrus big whoosh
I have always wondered about the working principle of these fully automatic pocket knives. But they could not fully explain it in any of the videos. I congratulate you very very much and also thank you very very much. You explained it so well by putting a lot of effort into it. I wish you continued success.
aha turk buldum
Would be cool to change the blade out for a modified carpenter's pencil
this 'how to' could not have been done any better
top notch!
This is really impressive.. Among all the other otf videos I've watched, yours is really simple yet understandable (even without words). That was a really great guide and video. I wish you the best in your endeavours.
By this way you made us understand the mechanism of the otf knife. Thanks a ton.
I can't find the template, trying to eyeball those pieces is a bit difficult.
I needed to learn this mechanism for some mechanical pop-outs on some sci-fi props I'm making, thank you so much for the clear guidance!
You did a great job on this video. I’ve had a otf knife for a couple years and luv them.
You have it down to a science! I am very impressed, you do great work! Thank you
Finally! A NewYork compliant OTF.
This is wild! Thanks for the video.
This is a very satisfying video thank you so much for sharing 👍🇺🇸♥️
Thanks, I understand the mechanism now.
it looks awsome!
You my friend, perfect. Thank you for your insightful video
love how you didn’t instantly whip out a $6000 wood cutter and some other crazy shit
Ive also wondered where the spring tension comes from. Brilliant.
Wow, that is cool. A complete Double Action Knife with basic tools. Respect. Subscribed!
Thanks
Actually, I should be writing my dissertation. "Actually"
Good work bro ^^
Great job
Well explned thank you
Excellent my friend😜👊👍
Thanks man!
pretty cool nice work
Pretty damned impressive!
Thats awesome bro. Good job.
ruclips.net/video/T2xd9RlRUQU/видео.html
Very good
Awesome👍👍
Thank you very much for this. I really enjoyed watching this and I gave you a like and subscribed.
IDe Kreatif yang sangat bagus.
Can you send the link of the blueprints (printable), down below?
Thanke you
Great now I will try make one good video 👍👍👍👍
8:14 a little cut on the right middle finger
شكراً جزيلاً لك يا صديقي .
🔥 🔥 dope Man
Thnx..Top..
Nice !!! : )
You have some crazy skill. Very impressive!!
You are awesome
You should make an assassin's Creed hidden Blade using this mechanism 🤩
Cool
so cool. Great video all around
Make another one using acrylic parts so we can look inside!!
Could I do this same thing but will a dowel rod?
really cool. could you show the dimensions of it. just thinking about making one myself.
Edit: never mind. just looked at the earlier comment.
Можешь узнать и показать механизм отф ножа ручки-pen otf?
how does that coil works?
The link for the template isn’t working so I was wondering if you could put the link somewhere here please
Does it matter what size da rulers are?
How thin was that metal ?
Can you please share and upload a template for the measurements.. Thanks
Where is the template?
I want a OTF utility blade knife but haven't been able to find one for sale so maybe I'll just make one
Bagus
Serious question !
Do you sell pre-cut kits to make the knife at home ??
If yes, I will buy one.
I have just one question what type of springs were those
P.S also insanely cool video man keep up the great work
Did you ever find out the kind of springs used?
Pen spring
very use full I can make shit loads of assassins creed hidden blades with this now
I appreciate it but if possible tell us with dimensions and do in steel
I couldn't find the template
Do you work for microtech
Can u share the template drawing of the knife
For those times when either Dracula or the Prison Yard gets too heated.
This thing is bigger than my schoolbooks
Good knife and you should use real blade instead of wooden blade.
Great for vampire hunters 😂
Where are the templates??
А есть схема или чертеж для распечатки? Скиньте пожалуйста.
ruclips.net/channel/UC8ZAG_TMVHoSeBmtdcvjsOQcommunity
Alright I’m not trying to be a hater I think it’s really cool and I kinda want to make one but why would you leave the paper between every layer
Where can I get those templates?
ruclips.net/channel/UC8ZAG_TMVHoSeBmtdcvjsOQcommunity
@@makemania778 Thanks a lot. ❤️
Dear blogger, do you have the data of these parts?
ruclips.net/channel/UC8ZAG_TMVHoSeBmtdcvjsOQcommunity
Can I buy this off you?
I’m going to slap this on my wrist give it a coat of paint and become a doom slayer
Now I want to make a bone knife…
Great, I want to make one, do you have plans? Please? *o*
ruclips.net/channel/UC8ZAG_TMVHoSeBmtdcvjsOQcommunity
Plz tell material
ruclips.net/video/T2xd9RlRUQU/видео.html
Drawing please bro
I cant understand the mechanims😢
Line the side of the blade with obsidian or have the blade made from obsidian stone .
Could not understand how those spring work ☹️
ruclips.net/video/-3O3PfpI9KM/видео.html
When moving the slider forward, the back stop engages on the back of the blade, the slider goes forward, the spring stretches, the slider reaches the back stop, the stop opens, the blade shoots forward, the spring returns to its original position.
When the knife is closed, the slider moves back, the spring stretches again, clinging to the locking axle, since the blade is still locked by the front stop, when the slider opens the front stop, the spring contracts and returns the blade inside the knife.
Thank you for replying.
Hey bro, just wanna point out that there is alot of wrong with your template, i have failed making the exact same knife about 3 times now until i realized that there is alot of wrong on the template, i whould appreciate it if you whould update your template so its actually useful, thanks👍
his worked!! maybe its the producer not the product??
He showed that his template works in the video, if you’re the one failing to make it several times then you just have a skill issue
This time I will use woodglut plans for this.