Finally FULL protection for the C8 Z06 or E-Ray! Get your ACS Composite XL splash guards here: bit.ly/4dveKAU and don't forget THE tool you need for this job - amzn.to/4bvXBVN 👍👍
I ordered them last Wednesday. Received them this Tuesday and got them installed same day. I chose to remove the rear wheels to make the install access easier. I like the look/contour of the ACS better and the extra length on the bottom should provide better protection coverage. P.S. Dana White did a fantastic job on the presentation. 😂
Nice job, Justin. I to have the Paragon frt guards and just got the ACS set for frt and rear. When we both got the frt. from Paragon, we had a discussion about them being a little short. Great product, but the extra length makes a big difference. I'm still not a fan of the ACS clips, though, compared to the GM ones. Both are great products, but I really like the extended bottom length of ACS.
Thank you. That's exactly how I feel about them, too. Really like both options but the extended length of the ACS guards are going to make a huge difference in debris getting kicked up.
Justin I noticed that you were wearing gloves when you were holding ur camera and Dana wasn’t while he was working on ur Z06. It clearly shows which one was dirty🤣…Justin clean that camera🤣 Looks Great!
I already ordered the EOS set, hopefully they have enough coverage 🤷♂️. This installation video will help a lot though. I’m going to order the tool from your link and now I know what size sockets / T bits I need. Thanks
You should! This thing has come in handy at least 3 times since I've owned it where I wouldn't have been able to accomplish what I wanted to do without it!
What's up Justin, man, went to buy these ACS Composite splash guards but they are way too expensive, ACS over charges their products, I purchased the Paragons, it's the same quality for a lot less.
@@HorsePowerObsessed the point of PPF it protects the paint. These will also get beat up, chipped to hell. And PPF will protect that area 100%. These won’t stop every rock. Also these make the car look cheap. Not a fan.
Understood. They aren’t for everyone. I’ve personally seen the kind of protection these offer and without a doubt they’re worth every penny. They are significantly cheaper than replacing ppf in the same area over and over.
@@HorsePowerObsessed true. My car comes factory with PPF on the bottom of the doors. Been a few years and still looks good. But thanks, I used your quick jacks video to set up mine. Much easier than reading that 50 page instruction manual.
Finally FULL protection for the C8 Z06 or E-Ray! Get your ACS Composite XL splash guards here: bit.ly/4dveKAU and don't forget THE tool you need for this job - amzn.to/4bvXBVN 👍👍
Nice upgrade. Possable protection against rear wheel chipping is a plus.And Dana White! 3rd hand out in front of the camara! 😂
Indeed it is! Yup, Dana White doing the hard work! lol
Oh the rocks my Z06 collects. Side vents and the rear. I feel like I need to carry an air can to blow them out. This would be better!
I ordered them last Wednesday. Received them this Tuesday and got them installed same day. I chose to remove the rear wheels to make the install access easier.
I like the look/contour of the ACS better and the extra length on the bottom should provide better protection coverage.
P.S. Dana White did a fantastic job on the presentation. 😂
lol he sure did! ACS is always killing it in quality!
Love the concept, just think that they are pricey.
Most likely will have to bite the bullet and get them, wish you had a discount code!
Maybe someday!!
Fantastic upgrade!
I think so too!
Nice job, Justin. I to have the Paragon frt guards and just got the ACS set for frt and rear. When we both got the frt. from Paragon, we had a discussion about them being a little short. Great product, but the extra length makes a big difference.
I'm still not a fan of the ACS clips, though, compared to the GM ones. Both are great products, but I really like the extended bottom length of ACS.
Thank you. That's exactly how I feel about them, too. Really like both options but the extended length of the ACS guards are going to make a huge difference in debris getting kicked up.
What jack are you using for your car? I have a c7 and have been shopping for a lift like you used. Thanks
I use the quick jacks. You can get them here: amzn.to/3WKNoRg
Easily the BEST Rock Guards on the Market!
No doubt!
Yep, glad I waited for them. 👍
Justin I noticed that you were wearing gloves when you were holding ur camera and Dana wasn’t while he was working on ur Z06. It clearly shows which one was dirty🤣…Justin clean that camera🤣 Looks Great!
😂😂😂 Right?!
I already ordered the EOS set, hopefully they have enough coverage 🤷♂️. This installation video will help a lot though. I’m going to order the tool from your link and now I know what size sockets / T bits I need. Thanks
They offer pretty much the same protection without the mesh in the rear.
@@HorsePowerObsessed 👍 Thanks
You got it!!
3 month follow up, ACS or Paragon guards?
ACS - 100%. They are THE company for splash guards. You'll pay more, but the protection is better.
Does this work with the Stingray also?
They have a set for the Stingray, it's not this same set though.
Question about the C8 air filter on your site, it fits the Z06 as well?
Unfortunately, no. Just the Stingray/E-Ray.
@@HorsePowerObsessed ok thanks!
You're very welcome!
Thanks HPO. Did you give Paragon a heads up?
Yup, we talked!
I'm curious where does all the water go to after wash few days later I pull out my driveway I see water running everywhere
Nice..ACS Products 🔥🔥🔥🔥..I have the rock 🪨 guards on C7 ZO6 with ZO7 pkg 👏🏽👏🏽👏🏽👏🏽👍🏽
Right on!
I’m gonna have to get me a ez red wrench. Always like new tools! Thanks for the video!
You should! This thing has come in handy at least 3 times since I've owned it where I wouldn't have been able to accomplish what I wanted to do without it!
@@HorsePowerObsessed looks like they have a micro one too that’s really short. 40 bucks isn’t bad for swivel head and ratcheting .
@Brandonsgarages I saw the shorter one but for me, that’s never been what I’ve needed.
Will Joseph be offering just the rear ones instead of buying the front ones as a 4 piece set ?
As of now, no. Might in the future though.
I am going to to order a set ASAP! Those are awesome! Thanks for posting Justin! Good to see Dana working!
Lol he’s a great help! If you order grab them from my site, it helps me out and it’s the same price.
Justin did you happen to see the new video of the upcoming ZR1 on saying goodbye to Tadge Juechter leaving a memento?
I did not. Where did you find it?
I need!! 😊
Heck yeah!! Protect your baby!
This reminds me of "this old house"with bob vila
lol why?
Rock on! 🤘 or should we say rock off *crickets*
lol good one!!
Cost of the rock guards doesn't matter as long as they protect that body and paint.
You really can't put a price on protection!
ACS guards are ridiculously overpriced. Not worth $400 - 500 dollars.
$650.00, they are crazy.
you're hand is blue.... kinda like in The Abyss and Vanna's touching your parts without protection.
lol that's true...🤫
What's up Justin, man, went to buy these ACS Composite splash guards but they are way too expensive, ACS over charges their products, I purchased the Paragons, it's the same quality for a lot less.
First as always
BEAUTIFUL!!
Another mod to add to the list of mods I want to put on my Corvette C8 Z06 one day 🫡
Highly recommended!
Just get PPF. Wont have to worry about this kind of stuff.
It's not quite that simple... PPF can still get beat up to the point of needing to replace it in certain areas. These help with that.
@@HorsePowerObsessed the point of PPF it protects the paint. These will also get beat up, chipped to hell. And PPF will protect that area 100%. These won’t stop every rock. Also these make the car look cheap. Not a fan.
Understood. They aren’t for everyone. I’ve personally seen the kind of protection these offer and without a doubt they’re worth every penny. They are significantly cheaper than replacing ppf in the same area over and over.
@@HorsePowerObsessed true. My car comes factory with PPF on the bottom of the doors. Been a few years and still looks good. But thanks, I used your quick jacks video to set up mine. Much easier than reading that 50 page instruction manual.
Thanks! And that instruction manual isn't very good either lol