Vtol! X-UAV Talon Build | Part 3
HTML-код
- Опубликовано: 13 сен 2024
- I decided to make the Talon a vtol project since vtol aircraft don’t need run way to take off. This will be a build update of the talon UAV series make sure to check out the wing and fuselage build videos here:
Fuselage build
• How to make X-UAV Talo...
Wing build
• How to make X-UAV Talo...
Vtol set up electronics
3508 580kv motors
40a esc
12x40 inch prop
Should be 14x55(recommended)
4s lipo battery
Talon electronics
3548 motor
11x7 inch prop
60amps esc
Pixhawk flight controller
Pdb
9g servos
Better prop is on its way make sure to stay tuned for the vtol flight *
I know some might think the propeller present is ok but you won’t feel what I felt when I was flying and how much throttle I had to put to take off for some few seconds and also I had to use a lighter battery so it can even lift off so a smaller battery couldn’t hold for long which it drains quickly. With the new prop we will see how much better it would perform.
Become my Patreon to support this channel and let’s grow together in return you will get exclusive content and files ♥️♥️
/ toms_hobby
Make sure to like and share the video
Don’t forget to subscribe
Thank you ♥️
Become my Patreon to support this channel and let’s grow together.
www.patreon.com/TOMS_HOBBY
Absolutely smashing.
I wouldn't be allowed to build this to operate it in the UK as it would be deemed illegal, unfortunately.
The fun police have more or less outlawed any flying of any vehicle beyond line of sight.
Anyway, it was very rewarding to watch your design fly albeit frustrating too!
It's looking great! nice project. you should start a patreon so people can help out with the project, or give out your address so they can send hardware. What you are learning is very valuable for your future.
I actually do have Patreon account but I haven’t set it up properly..
Thank you
Excellent Craftsman!
Incredible work...need to check out your old videos too!
You glassing the talon?!?!
I’ve been thinking about exactly the same thing and looking for the video.
As I commented on your community post, your work is some how linked to what I’m trying to figuring out.
Your videos really gives me the passion. I know it’s not an easy thing to do to film the video while you are working on something. Thank you for your great effort. Love your contents.
Thank you
Really appreciating man please make more vtol and add hard points and camera also just like military drones ❤️❤️❤️❤️
Tom this is very impressive. Great work!
U doing a great job..impressed!
Nice one well done, that grey is really hard to see at a distance, be careful!
Bravo et du courage
What is the total weight without battery? what is the length of cf booms that you used with 14x55 prop and how's the part on the wing that holds the boom attached to the main body of the wing? I am trying to build a similar vtol .
Great work, bro!
Nice work bro
please where did you buy your fiber cloth from
Great job!
Would love to see the ardupilot configuration and programming part of VTOL plane
It’s quite overwhelming to do all that now as I still use my phone to record and edit my videos but hopefully in future I will start including those in my build videos
Where can you get the stl files for the boom attachment on the wings please, thanks this is a really excellent project
Bro I just wanna say, thank you for the amazing content. I've got a couple questions about the coating and fuselage of the UAV. First of all, what kind of foam material have you used for the project, as you know some kind of foam materials doesn't combine very well with the epoxy (Epoxy melt's the foam directly).If you can give me some information about the foam material you used, I will be appreciated that. My second question is about the fiberglass and epoxy selection. What kind of epoxy and fiberglass have you used for this project. Can you give me the thickness dimensions of the fiberglass sheet and also ratio of the epoxy mixture. I know, I asked so much thing but you have got the patience to answer them. Special thanks from now.
Foam material: Eps foam , the type you find in brand new appliances
The epoxy used is an Epoxy resin mixed hardener.
Mixing ratio is 2:1, two part resin one pare hardener
It’s 0.3mm fiberglass cloth
@@TOMSHOBBY Thanks for your feedbacks and comments bro.
Please where are you in Nigeria
Brilliant! - Bravo! :)
Hi, do You have dump from ardupilot?
What FC firmware are you using? Ardupilot??
God damn
So please this autonomous flight .. I want to learn how to program it .. can u make a video of you programming autonomously and give mission 🙏🙏🙏🙏🥲
do you have the code pls?
Can anyone here specify the kind of resin to be used for fiberglassing the foam parts like he's doing here?
Hi thanks for the upload , did you 3D print the motor mounts and the wing boom clamps ?
If so please can you share the link .. I am currently doing the same project .. also please can you advise on the length of the VTOL booms ?
Many thanks
Sorry I can’t share those files links..
Regarding the boom length you need to figure the prop size you want to use and ensure it’s clear away when mounted from your wing area.
What is the maximum range of that
Have you shaired it to the African Innovations group?...
Yes just did
@@TOMSHOBBY Haha great! :)
Need to meet you for mentorship...
Hey looks great, can I carry 1 kg bomb with it, don't worry I do not sell it to Russia in a dark net.
The Motor screws are to long!!! When the touch the Motor windings, they will produce shortcut and fry something
Well there were no where touching the coils .. it’s just camera perspective
@@TOMSHOBBY ok
@TOMSHOBBY bro u want patreon but u r unwilling to share the boom attachment 3d files
Like peeep do give patreon on fully open source things but this seems to be ur personal so... can't help
If u want to sell the 3d files then also do Comment below
I am ready
I get a lot of emails everyday, I have the link to the files uploaded on my patreon page. You just need to request access to drive.
promosm
U look like 9ice