Best Flysky Receiver Ever? (iRangeX Fli14) 👍
HTML-код
- Опубликовано: 11 сен 2024
- Here's a new telemetry capable Flysky MICRO receiver that sends RSSI values over a channel so you can put it on your OSD. I could not get this to failsafe in all my testing. Could be the best flysky receiver I've ever tested.
✔️iRangeX Fli14 Micro Flysky Receiver - bit.ly/3HMQiLZ
▼ RC Gear
Jumper T8SG V2 Plus - goo.gl/xDBUXE
FrSky Taranis X9D Plus SE - goo.gl/N4PxtR
Fatshark Dominator V3 Goggles - amzn.to/2eY6dhF
Menace Bandicoot Antenna - amzn.to/2wRURUs
Foxeer Lollipop Antenna - amzn.to/2wVP1kK
Cloth Tape - amzn.to/2JpCx5U
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
GoPro Hero Session 5 - amzn.to/2xpwBsj
Hawkeye Firefly 8S 4K - goo.gl/5Wo1Zo
SJCam SJ7 Star 4K - goo.gl/BzWpii
RunCam2 - goo.gl/QS3pzu
Mobius Mini - amzn.to/2vOy4nv
Samsung Galaxy Note 8 - amzn.to/2wTF4lW
▼ My Camera Drones
DJI Mavic Pro - amzn.to/2wTIzcg
My video editor - amzn.to/1VJHWp7
My editing PC - amzn.to/2MhlR3g
👉s u b s c r i b e - goo.gl/b1cZZM
💰 Latest sales and coupon codes
🐦 / albertkim
💰 d o n a t e
Donate via PayPal - paypal.me/marbl...
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
Well, I prefer the Fli14+, it has dual antennas although it is a little bit bigger
I have it and the rssi is not accurate, I had a failsafe with 50% rssi at around 400m.
Antoine van der Straeten I currently own the Flit10 which shouldnt have Resi, but it still works. Not tried range yet though.
today 14 Aug, i'l be installing/setting for this fli14+ on my zmr. will get back on this review when successful.
finally got to test the fli14+, range is abit disappointing around 100meter radius around open space rssi drop to 32 on my stock FS-i6x (havent done any firmware upgrade-if there is any...) betaflight 3.4.0, Matek F405-Std, Port UART-1 serial RX, RSSI CHANNEL- aux 10 & checked Rssi Value on OSD..working fine though..do i need some sort of calibration?
Alan H Thanks for the Test! I got 800m out of my flit 10 before it failsafed
i just got a few of these and also got the FLI14+. Will be testing them out in the next few days. So far the FLI14 works well from what I have seen
Which one ended up having the best range? FLI 14 better than the 14+?
Fantastic, Albert! Really great little receiver! 😀
Great flight too!
just did some ordering on those. glad you did this review, really appreciate it.thank you.
Great receiver 😀the fli14+ is excellent as well and with duel antenna
So the one Albert is showing us is the Fli14 and you are using a Fli14+ ?? Is that available on Banggood? Is that the same thing but with 2 antennas? Alberts Fli14 has just one 5cm one.
Yea that’s an awesome receiver I have one I use with my evaluation n I love it , awesome review bro 👍👍
Hi..which channel u used to configure BF rssi?8?
@@armfpv9962 I didn't do the rssi on it , when got it n hooked it up n all that's when I didn't know much about all of that n I just never got around to doing it yet , but I do believe it is 8
Thanks A. K. Fli14+ is my fave. I also got a short dvr footage of it on my channel if anyone wants to see.
just ordered 2 thx nice review
Hi Albert. I have the hglrc hornet and the flysky fs-i6x transmitted and using the fli14 receiver. It show me rx on the transmitter. Now in betaflight I have no connection to receiver and I have tried over and over again to make this receiver work in betaflight in the receiver tab. Can you show how to connect this so I can fly this thing. Thank you.
Nice!!!! I like it!!!
Hi Albert. I recently got the Fli14. So im able to get rssi on my osd. I have an evolution tx. Problem is my rssi reading is not showing accurately. Only shows around 30-40 values. How can i get it to read 99 like yours? Doni need to calibrate something? Hope you can help. Thank you
Check and make sure analog rssi is not turned on. It should be OFF.
Hi Albert..what channel should I use to configure BF rssi if bind it with turnigy evolution?hope u can help..thanks
You'll see it on Channel 14
Amazing
Hi Albert - what BF version that'll work with this receiver? Would 3.5x version will do?
3.5.x will work
I've just killed my Flit10 so this was the time to change to the Fli14+. Setup process was finished successfully, but sometimes when I turn on my quad, however I can see RSSI both on my transmitter and on the OSD, it won't arm. Turning off and on 1-3 times, and I can arm again. I have RX info / RSSI every time so the transmitter and the receiver linked successfully! Do you have any idea what can be the problem?
I've checked the Betaflight "status" command (with props off, battery on) and it says: RX LOSS CLI MSP, which means "Your receiver is either faulty or has no link to the transmitter." It's linked. Is this really a faulty receiver, or I miss something?
Thanks in advance!
Unfortunalety no. Gearbest didn't help. I filled their form (gave them every info about the order, the product, gave them YT video, etc), I got back a message to fill their form... Heard a lot of bad things about their support, which seems to be valid :/
Yesterday I went to a little forest, where I could fly about 25-30 meters away before RXLOSS. Happened 3 times. In open space I flew about 50-60 meters away, and was everything seemed to be ok, but I'll change it as soon as I can to something else.
The Flit10 was absolutely ok but shipping cost would make it expensive from HobbyKing, and it's out of stock at Banggood, as well as the X6B and/or it's antenna. X6B is way too big to my 3 incher, but I rather fly with it attached outside and got a working receiver for about 5-600 meters than build something inside to be in safe for 30 meters :P
I had that too, I fixed mine. Go into SUB TRIM in your TX and bump the throttle down a beep or 2. Then you will find that it realizes your Throttle is "closed", mine was a beep up and appeared OPEN so wouldn't arm, that fixed it. Try that. You prob fixed by now.
Hi mate could you tell me which fly sky receiver to use with my Darwin baby ape fpv drone ? Running a fly sky i6. Cheers
Get this one bit.ly/3HMQiLZ
I bought four of these and couldn’t get any of them to work on the receiver tab😫 I gave up and bought a QX7s 👍🏽🤙🏽😃
Same here,I got one and my friend got one and we both struggle with the same as you ;) hehe
Esk race dang! Did you get it to work and if so how?
Nope,it's going in the trash ;) Never gonna buy them or from that company again ;)
We got one working :D weee ,hehe
Send me yours xP.
I'll order one soon and I'll test it and tell you any updates
Looks great! Can I have battery voltage telemetry as well as send back GPS coordinates to me TX with this?
OK just bought the diatone r349 and the fli 14+ and have a flysky i6 usually fly on ppm your saying I can use Ibus. How do I do that?
Actually The mini one with the single little antenna I guess its the I14
Use UART6 and configure for IBUS and it will work.
Thank you!
Hi, interesting video. I'm a bit confused. I have a Fli14+ FlySky RX and my new Diatone R349 HD has no IBUS but does have SBUS. Can I just use the SBUS wire from the FC to my RX and select SBUS in BetaFlight? I am used to having quads/FC's with IBUS so I am a bit confused as to whether it will work or not.
The whole iBUS/SBUS topic is somewhat complicated but I think if you can't get it to work on the SBUS pad, you can use either RX3 or RX5 and enable IBUS on one of those.
Ok thanks for that, yes it confuses me alright. When I do that and say I soldered to RX5, would I enable IBUS on a UART or am I over thinking and making it more confusing? Thx very much. @@AlbertKimTV
would you recommend the jumper t8sg v2 plus as an upgrade over a flysky fs-i6 with upgraded firmware?
Yes, most definitely.
is it also preferred to a taranis q x7 with a multiprotocol module?
Really nice my friend
Like your style
Hi Albert. I have Fli14+ and i get failsafe at 200m max. Is the normal Fli14 better range than the Fli14+?
Fli14+ should have better range in theory because of the diversity antennas but other factors like antenna placement and your RF environment may also play a role in range.
@@AlbertKimTV Yeah. I had practically perfect placement of the diversity antennas at a right angle on the back of the quad. Many other people have also claimed to only get between 100m and 200m with this receiver. There is a thread of complaints on RCgroups. I think it is a manufacturing issue with the Fli14+. I will order a Fli14 and see if it is better
Yeah, there might be some bad batches out there.
Nice. Took long enough to come up with a new fs receiver.
Have you seen that the new "dark knight" controller comes with a new one too. An other version
I will be getting the Dark Knight soon.
Hello everyone, I know this receiver is an iBus, but on the radio there some option like PWM+i, PWM+s, PPM+i, PPM+s. What all of these options means?
I use PPM + iBUS. The first one only matters if you use PPM or PWM.
Albert Kim Thanks again brother, good to know,
I will definitely do that
Is it possible to turn up the micro watts on the flysky transmitter? Or do something that enables it to rival the frsky's?
There's a signal booster you can buy. I will review one soon.
Albert Kim sweet! Really looking forward to that!
Nice 2 incher. Which props and motors are those?
I've seen specs that the fs-i6 transmitter module outputs 17dBm or 50mw, (in the actual fs-i6 for the jumper I'm not sure).
Wes H in the manual specs its says less than 20 dbm.
Rui Kade Yes, which is why I was looking for something more accurate. It is known for decent range, and is a great radio.
Nice👍
i'm new to this...how do i bind my fs-i6x to a frsky l9r....please
Flysky and FrSky are not compatible so this would not be possible.
thanks for replying Albert....what about a spektrum dx6i?
Does it have the same connector as the other flysky receivers? So If I take out my regular flysky receiver can I just plug this one in?
Thanks!
I think most receivers have different pin outs but it's easy enough to re-pin them to the correct order for your receiver.
I've tried both Fli14 and Fli14+ in combination with a Turnigy Evolution TX. But .. I found the range really not good. No idea how you managed to get such a good reading with the Fli14 and that standard antenna, lol, but I can't get near those numbers. Even when you fly 10microwatt, that looks more like my experience by range (perhaps a bit further max 300m) but I don't think an Evo has only 10 microwatts?
The Evolution is at 60mW. I was using the Jumper transmitter so maybe my antenna is better? I have the Fli14+ now and just did a flight to about 250m and no issues too on that one. My bad video link prevented me from going further. Might have to test this on a GPS quad and go all the way to failsafe. I think I saw someone take the Fli14+ out past 1KM on 100mW with 30% RSSI.
Thanks, I was looking for the wattage of the Evo but couldn't find it the other day. I started already thinking the problem might be in the Evo. I still have a modified i6 with better antennas and I might try that one to see how it turns out and if it makes any difference. 300m is more then enough for me, as long as RSSI stays high and not dangerously low. Once I had a failsafe at 125m and that's not normal, some trees and bushes as usual but not in a suburb area or buildings in between like concrete stuff.
Would be interesting to know how far you will get with GPS, yes.
I'm lurking for the Nirvana but I find it too early to buy. Just want to make sure it's good and tested. I'm not gonna be the first version buyer this time :D
In the meanwhile I've tested it with the i6 but that makes totally NO difference. So, I thought it was my Evo but I guess it's not the problem. I have really no idea why this happens. It's the same on another setup with the Fli14+ and that's why I was so surprised to see your result, lol.
Sorry, logged in with a different account I see now .. genivos=Remco :D
nice
Nice review, thank you! Would you please advise how to set up osd rssi for flysky? Could not find any good guidance.
With the older the receivers the setup is difficult and doesn't always work. This receiver requires no setup. Its already sent on channel 14 so you just have to select channel 14 in the OSD and place the element on the screen. This receiver takes 2 seconds.... the others can take HOURS.
Albert Kim Cool, thank you!
Luckily Andrey asked, i am browsing the Tube for betaflight set up so to show the rssi osd....lol..thanks again both parties!
Albert Kim , i got mine default on aux channel 10 with FS-i6x.
Is it smaller than the fs82??
it's a little bigger than FS82
Why do you run your motors in the opposite direction of what is considered "normal", and thus have your props oriented differently? I think there is one toy grade manufacturer that does the same thing, but I see no obvious benefit other than to possibly cause confusion.
Bill Somrak some people say that you have less dust on the camera. And since there is no downside why not
The pro is that if you hit something, it will push you away rather than drag you into it, but the con is that if you clip a lot of grass, you will get a dirty stack instead of a dirty fpv cam.
I see the 'theoretical explanations', but I doubt that any significant science based studies have been done on prop rotation of quadcopters. So, I would say that these theories are 'subjective' at best. However, as the saying goes, if it works for you .. go for it.
Bill Somrak Yeah, Guess it's pretty subjektive, but works for me, especially on hard surfaces like trees or walls, not so much in scraggle👍
As I said, "If it works for you .. great". However, my last comment on the topic might be, if there were any science based studies proving advantages to this method, then "The 800 lb. gorilla of quadcopter manufacturers" would likely be using this technique, as would dozens of other quad manufacturers. However, AFAIK, only one toy grade quad manufacturer uses this technique. There are also some quad manufacturers who invert the motors and have the props pushing, reversing the thrust vector. Some even have two motors upright, and two motors inverted. In these latter cases, I would propose that these orientations are merely cosmetic, rather than well thought out performance based decisions. Bottom line, I guess it's "personal preference" more than anything else. Cheers.
I wonder if it works on flyplus i6x.
it should
Albert Kim im sorry. What i meant is the rssi osd. Because flyplus firmware has an extended channel for rssi and err. I have the flit 10 and the rssi osd is not compatible,.
Shame you deleted my post, think a lot of people would benefit from knowing that my results are very different from yours... but your channel your decision i guess
I didn't delete anything. I think RUclips did something.
probably bugs, we shouldn't be too quick on accusing stuff we dont know. this applies to me as well.
Wait...What? What happend? ^^