BetaFPV Air65 EASY MODS to go UNDER 15 GRAMS!
HTML-код
- Опубликовано: 11 сен 2024
- www.TinyWhoop.com
TABLE OF CONTENTS BELOW!
.
Most people probably don't know how amazing it feels to fly aboard an aircraft that is under 15 GRAMS, but thanks to this new BNF and Nightwing's expertise now you can! The experience is a new level of throttle response and light, flitty flight.
.
SUBSCRIBE TO NIGHTWING'S CHANNEL!!! - / @nightwingfpv
.
Here are links to the parts you need to complete this modification:
Air65 BNF Aircraft
www.tinywhoop....
Pinch camera
www.tinywhoop....
PP Mount
www.tinywhoop....
RENY Screws
www.tinywhoop....
PEEK Screws
www.tinywhoop....
Custom Dyed HQ props
www.tinywhoop....
You can also use any of these ultralight HQ Props:
www.tinywhoop....
BT 2.0 Connectors
www.tinywhoop....
Clone Popper DELUXE
www.tinywhoop....
Table of Contents
0:00: Intro
0:59: Canopy Removal Stock Tear down
1:22: Unsolder Motors from Flight Controller
1:44: Remove Flight Controller
1:50: Remove ELRS receiver
2:04: Unsolder BT2.0 Pigtail
2:38: Remove Heat shrink and shorten wires on ELRS receiver
4:18: Solder modified ELRS receiver onto Flight Controller and glue into place
5:10: Remove Props
5:25: Remove heat shrink from motors
5:45: Camera swap and mods
7:41: Shorten and solder Motor wires back onto the flight controller
7:50: *IMPORTANT REMINDER *
8:04: Shorten motor wires.
8:58: Modify VTX antenna
10:07: Swap out all motor screws for PEEK/RENY screws
10:25: The Ol’ Pop and Slap
11:29: BT2.0 Modification
12:55: Solder BT2.0 onto flight controller
13:28: Moment of truth
13:54: Flight footage
.
.
.
.
Here's the required music attribution!
------------------------------
Ohayo by Smith The Mister smiththemister...
Smith The Mister bit.ly/Smith-T...
Free Download / Stream: bit.ly/_ohayo
Music promoted by Audio Library • Ohayo - Smith The Mister (No Copyrigh...
------------------------------
Good to see the og tinywhoop channel doing videos again. We need more! Thanks for this mod!
Heck yeah lots more stuff on the way my friend!
@@TinyWhoop Cant wait!!
Thanks for the little tips like adding solder before removing the plugs, the comment about the difficult to work with the original solder and adding a little of yours, the one about the skinny silicon wires (that you just tin it and it already shrinks a little), and all the well made images. Maybe some details is already know by the veterans, but for newbees like me, its gold.
So true, the minor tips are the real gems in this flick. Thanks dramixer
I dig this videos vibe.
Nobodie ask u if u like it or not ….
@@GUILLERMO.NESPOlO hahah, hey my friend.
@@BOTGRINDER want me to ban him? 🤣🤣
yooooo haven't seen this channel active in years, good to have you back guys ❤
Thanks ps! We wanna do hecka content this season, and we want requests!
@@TinyWhoop Please make more build videos! thank you Jesse!
@@tadashi4k659 you got it!
@@TinyWhoop hey Jesse, your old style flights and fun vlog style content is what tw is about. Would love to see that as well if you guys are up for it. Good to have you back ♥️
@@TinyWhoop tinywhoop long range build, tiny night vision, tinywhoop battles (knocking eachother down?)
Awesome build! I LOVE the antenna trick! I like to put an unused male plug in the lipo connector when soldering on it to keep everything in place better it doesn't seem to put as much heat to the plastic.
the weight loss would be all for nothing if you swapped the arrow forward! haha. Nice video!
Removing 2.282g is a 13.2501089% drop!!! Mighty diet!!! Thanks for the tips!!!
Oh dang that trippy spin inside the gazebo was so cool. Rad to see it not going around a pole but staying inside of a bunch of poles. Well done 👍👍
I know he so good!!! Like gdmfr
Great job. During the sub18g contest I got my whoop down to 15g. 14.9 without modding the frame is pretty sick 🤙
Loved the video!!! Nightwing is the best!! Funny thing is I just got mine today. I'll try these mods at some point. This was super helpful and well put together info.
Yeah man NW is so good. Thank you!!
HELL YEAH ! Keep these videos coming. Love yall
The metal piece on the antenna is the balun. To go a little further I print with foaming TPU and make a one piece grommet & camera mount. I use a drop of e6000 to hold the grommets on. I would really love to see BetaFPV continue down the road of no metal USB housing on HD specific boards.
If you want to go over kill with the camera, desolder the wires from the pinch camera and use the wires from the original camera. Now, instead of using the plug, cut it as short as possible and direct solder it to the flight controller. Then you can actually pry off the camera plug from the board. this is a little tricky to do and the weight is minimal so only do this if you really care about removing as much weight as possible.
Wow! This tutorial was really well put together. Absolutely an S-Tier Tiny Whoop video for sure.
LOVE the great content, and LOVE Peter's hat! ❤❤❤
I am a durability dude, a breaker/basher, and most of the unsoldering and removing heat shrink gives me anxiety. I learned some soldering tricks though so thank you! Nightwing has packed my order a bunch of times so it's cool to see him in a video.
The arrow is just an ocd thing, but yea I’m with you Jesse😂
A really well presented tutorial Nightwing, nice work
Thank you!
Unreal! I love how you guys are always pushing the limit. What a beautiful aircraft! Thanks, Jesse and Nightwing!
I got the Packed by Nightwing sticker, now I want a Modded by Nightwing too!
Nice tutorial for the community!❤
Tinywhoop inspire all of this thank You tru master of the craft
awesome video. now lets see a modded Air75
That bt2.0 trick was awesome!
My mind has been blown. I ordered a ton of stuff from your website after watching this. Literally taught me so much in just one video!!
is that the nightwing that packaged my order! How cool!!
Yeah just got mine yesterday and has his "autograph" on the packing slip, thanks for the candy too! LOL
17.2 down to 14.9 wow 🔥
.
Integrated RX Bayang protocol might able to save the weight more tho ... 🤔
This aint your grandads tiny whoop for sure this is some next level stuff right here
Nightwing Great vid I need to do this sometime 👍
Great work. All of the mods I would have suggested... And a result that even surprised me. Sub 15 without enamel wires or frame mods is amazing
Amazing! Do the same with Air75. Doesn't something go short circuit when put receiver without insulation directly on FC? I like the end part: "we don't need upgraded U-plug from manufacturer, we just do our own much better" :P
Best walk-through of its type. Informative and to the point. Dat camera angle tho'! 😅Too much for this old man 👴🏻
I haven't flown a tiny whoop in over 2 years. was kinda looking to get back into flying, but I don't think I could catch up with all the new tech !
You could, and no matter how hard not would be it's so worth it!! They're way more fun nowadays!!
Fun video, thanks!
still have my original tiny whoop haven't flown it in years
Brushed? Inductrix fc??
Currently eating the sour patch kids that came with my order from you guys, eagerly waiting for my Air65 to show up so I can do some of these mods too lol THANK YOU for making this video!!
Enjoy the spk's homes and thanks so much for the support!!
Tail in the back ftw. Never forget that 4% y'all
link to that solder station please!
Love the video! I did pretty much the same to my Mob6 24, but i could only get it down to 16,9g. I might have to get one of those as well :D
Not comfortable with soldering yet, so I just swapped out the motor and canopy screws for peek screws. That got my freestyle version down to 16.5g. I think I’ll try the antenna mod next.
Update: Did the antenna mod and am down to 16.2g.
Not bad man!! Bravo. But soldering is a much easier step than you think
great work and video
Thank you very much!
LFG good stuff
Awesome!
thing to consider (coming from 5" and other crafts) it is worth modding whoops because they last a very long time in comparison to 5". Maybe not these motors, they do not last all that long, but rest is perfectly fine :)
Savage. Just ordered two of these guys from ye :)
thank you so muchfor the support!!!
Hell yeah!
🤘🔥🏁
I cant wait to get one of these... gotta save up but dang they look fun! Do you think a crsf nano would work well with one of these?
crsf nano would work great with one of these!
Hello BLIZZARD FPV here .
Long time listener, first time subscriber
Banger !
Died at all the comments 😂
Yaaaasss!! I love mine!!
what's up man! got my issue of flytribe and i LOVE this thing!!! bravo
Great vid! Love to be able to see the actual numbers!
Still fairly new to whoops, so this may seem like a silly question, but with my bigger quads, using a slightly heavier motor with gobs more thrust always seems to liven them up to me, so would the same principal hold with tiny whoops? Say you had this build, and added 2-3 grams of weight, but doubled the power-to-weight ratio, would it have a similar effect? Or is the extra weight not worth it even when it's overcome by thrust?
I thought the tail is for the end of the canopy to fit under when it`s in full tilt
Awesome video - Thanks
As a newbie is the arrow being at the front vs back a legit thing? Or just a meme?
From my understanding it was important to have the battery tray offset towards the back, but it seems like the air65 frame has it centered so that doesn't make a difference
Don't tell anyone I said this but it's a meme ;)
Nice trick and wonder battery run time will last 7 min?
Ever used solid wire for the motors? Higher current less skin effect since it's such a small amount of wire?
I have but they tend to break too often for my liking. I'll use magnet wire on the external boards that I glue down because they don't move as much so the wires don't break.
Can we get a camera mount like that but for the c03
I literally just received this one from you guys yesterday and is my first tinywhoop. Was not prepared for how fast and responsive they are. I mildly bumped into a chair in my yard and already cracked the frame. I didnt realize how fragile those frames are. Kind of disappointed about that. I ordered a couple of meteor 65 ultralight frames from your site last night. I assume that's a direct replacement for it?
Great video
A suggestion for the next video: build your personal favourite tiny whoop build
Excellent.
Thanks king! Cred to Mr. Wing of course
nice mods!
...but can I buy you some flux? >_
Whats the purpose of the metal part on the whip antenna?
What kind of glue did you use for the ELRS receiver?
Where I can get that prop remover or the stl to do it ????!!!! ❤
It's for sale in the description links! Sorry I don't have the STL, I buy it from the creator who lives in China
INCREDIBLE!!!!
Also yea anybody can do this but gonna preface that you need to know how to solder. LOL
But anyone can solder :)
@@TinyWhoop I jumped into micro RC about 10 years ago and definitely blew up/ melted stuff. Absolutely anyone can solder eventually given the patience and practice. Hope ppl who struggle see encouraging messages to keep practicing and going. I guess where I’m going with this is it may come by to a novice as “soldering being hard doesn’t exist” instead of “it may be hard and will take practice but keep your head up” cuz for a time I was quite overwhelmed and could only handle so much magic smoke. 😂
Alright, where can I get the soldering stand you're using Peter? Magnetic?
very nice!
Nice🥳
I wanna see a 1s WS VTX on one of these. Where do you get the prop pop off tool?
that would be epic! popper is linked in the description
Amazing, what's the flight time and what size lipo?
is there a risk of the ELRS rx shorting out with the fc as the heatshrink has been removed
I haven't heard of it yet
Thats cool👻
Where can I get that solder stand at?
where can i purchase that work bench u got that can hold on to stuff while u solder etc? looks super useful for a person like me with shaky hands
just look up omnifixo!
Do you ever use flux? 😮
What is the name of prop removal tool? If possible please provide a link to it. Thx
The the clone popper, available on tinywhoop.com :)
Amazing only 15 grams!
8:02 the arrow points forward otherwise how do you know where your are going 🙄😤
Lol
Got a link for that canopy? Seems like the cut throat lightest canopy ❤
It's in the description! Thanks my friend
whats that holder called?
Omnifixo
why did u copy n paste the same comment on screen and proceed to say all these comments asking to see this when it was just one?
Busted!!!!
@@TinyWhoop still loved the video! 💜
@@0hhDeee yeah we only got one request but we thought it was a good idea :)
Do I wait for the Air 5in1 or go with this 4in1 set-up?
Shyeah that's the question
The 5 in one looks to be heavier than the 4 in 1 with external receiver. And then you have an extra potential failure point.
@@Tokyo_Dom what elrs receiver do you suggest? The flat Beta one looks the most tempting...
Don't add solder add flax
sub 14g's once the 5in1 comes out?
It would be heavier. The 5 in one weighs 0.7g more than the 4 in 1 (an external rx is about 0.4g)
We already did sub-14, some of us went as far as sub-12. We have the parts available, it's just a pita with cutting frames and stuff
@@Tokyo_Dom i know ur UL build ^^ but oh shit, i thought the 5in1 would be even lighter. Didnt go throug with calculating it yet though.
The ELRS lite with flat antenna seems to be listed at 0.53g plus heatshrink and cables (for a normal build) so would probably come out kinda close unless beeing as sparing with wiringing of the rx as in the video.
i really wanted to try out the new air board to get my 75mm sub20g's, but now idk what to do😂
idk i somehow really dislike the idea of seperats rx on a tw, but easy 0.2-0.3g saving would also be nice 😅
edit: 0.53g for flat antenna like used in air65 and 0.47g for tower antenna
thought flat antenna would be the lighter one lol
@@KidCe. Yep and the HM ep2 is only 0.40g by my scale. Wires only need to be 1cm long and enamel wire can be used (not much vibration there).
Separate parts are preferable, if it's lighter. Being replaceable should be seen as a bonus!
can you direct solder the camera to the fc?
Yeah! Can also use magnet wire on the motors and drop the frame weight considerably, these were the mods NW deemed reasonable :)
@@TinyWhoopWould really love to know why magnet wire was considered unreasonable. Does it have sone major cons or just extra work to switch to it? If so Id love to know because then Ill do my builds with magnet wire. Also 28 or 30 AWG of magnet wire for 0702s?
@@TinyWhoop Can we see that in the next video? That would be cool
15g awesome lol
I was like pshhhhh - way too much effort…. Then the weigh in dropped….
Are y still alive?
unbelievable
Heck Ya! save weight = saved lipos ‘ 🩸 ✊