No sir, I don’t clear coat the boards at all, that was factory. Now, what you are seeing on your board is just remnants from flux burn off which is common and every radio differs, best thing to do is use some acetone(not much) and do a good Board cleaning. Keep up the cool channel sir. 73
@@generalingwer4341 the reason I say that is because the solder points look to be a different color as well as potentially a larger amount on each contact point at least that's the way it looks in the video
As to any, " Clear Coat ", I'm guessing it depends where the radio is made ! Vietnam or China, as I understand ! Too I read where Uniden is still involved with President !
You laughed when you said "you take it apart,even if its brand new".l do the same thing before it gets used for the first time.l have seen pretty large pieces of loose solder inside brand new equipment.
Thank u for comment. nice to hear im not the only one who makes sense lol.you would be amazed how much junk floats around in new stuff,solder sphals ,short pieces of solder,leads ive seen it all.the new thing has been skinned wire on rf transformers if ur looking at a rm italy.it pays to be a good "detective"
When the lights were off and we were looking at the sideband signal on that oscilloscope everything was perfect. When the lights came on, you had obviously adjusted the power output on the sideband, and it looked terrible. Should’ve left it alone
I want more led solder .. They destroy working on radios with led free crap solder feed through connections should be ok united to pull section only. I like radios compact size .. But without turning you to the max the radio is ok. I had a issue with styrker 955 it went off to hot soldering station land have RX fixed. What's your thoughts on anytime 6666n all mode 10 meter
I suspect that the quad 6 maybe a little better than the lincoln.likely for about three reasons.lincoln has noisy high pitched receiver and channel selector issues...
@@generalingwer4341 On the Lincoln clarifier don't stay unlocked when you turn radio off have to go back into the menu everytime. Sound I used a bigger ext speaker helps recieve sound. Lol ..
Just sold this radio recently to a guy from kentucky.it would be cool if he found this video one day.lol.
My radio that I bought this month was the same way. I had a lot of corrosion on the rf shields also.
I returned it and the new one was claen and the alignment was perfect on the scope.
No sir, I don’t clear coat the boards at all, that was factory. Now, what you are seeing on your board is just remnants from flux burn off which is common and every radio differs, best thing to do is use some acetone(not much) and do a good Board cleaning. Keep up the cool channel sir. 73
God bless and thank u from world radio 766 pa.
I was thinking a potential assembly line repair??? Whatcha think 204?
@@KINGLOWNESS hey could be ,didnt think of that possibility.thank you for watching from world radio 766 pa.
@@generalingwer4341 the reason I say that is because the solder points look to be a different color as well as potentially a larger amount on each contact point at least that's the way it looks in the video
Wouldn't 90% isopropyl alcohol work just as well
Man your cool.
As to any,
" Clear Coat ",
I'm guessing it depends where the radio is made !
Vietnam or China, as I understand !
Too I read where Uniden is still involved with President !
Thanku for comment🙂
You laughed when you said "you take it apart,even if its brand new".l do the same thing before it gets used for the first time.l have seen pretty large pieces of loose solder inside brand new equipment.
Thank u for comment. nice to hear im not the only one who makes sense lol.you would be amazed how much junk floats around in new stuff,solder sphals ,short pieces of solder,leads ive seen it all.the new thing has been skinned wire on rf transformers if ur looking at a rm italy.it pays to be a good "detective"
When the lights were off and we were looking at the sideband signal on that oscilloscope everything was perfect. When the lights came on, you had obviously adjusted the power output on the sideband, and it looked terrible.
Should’ve left it alone
Nothing was adjusted but am carrier.🙂
I want more led solder ..
They destroy working on radios
with led free crap solder feed through connections should be ok united to pull section only.
I like radios compact size ..
But without turning you to the max the radio is ok. I had a issue with styrker 955 it went off to hot soldering station land have RX fixed. What's your thoughts on anytime 6666n all mode 10 meter
I suspect that the quad 6 maybe a little better than the lincoln.likely for about three reasons.lincoln has noisy high pitched receiver and channel selector issues...
@@generalingwer4341 On the Lincoln clarifier don't stay unlocked when you turn radio off have to go back into the menu everytime. Sound I used a bigger ext speaker helps recieve sound. Lol ..
It's not clear coded that is a conformal coding that's put on by the manufacturer