$50 Murray Junk Yard Go Kart ~ Lives & Dies
HTML-код
- Опубликовано: 17 сен 2024
- Well the ole Murray lived and died in this video. We have a great engine to go on this kart so definitely stay tuned to the install video. Don't forget to like, comment and subscribe for more content.
Help support the channel on patreon! patreon.com/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - rbg_redbeardsgarage14
----------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
10% Discount Code - red beard
Parts used in this build -
Murray CVT Kit - goo.gl/aemiHn
Black Vinyl Fabric - amzn.to/2CwqpRv
Seat Foam - amzn.to/2CCstZ2
Race Car Patch - amzn.to/2CxqyUO
----------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukimusic
----------------------------------------------------------------------------------------------------------------
Tools used to make this video Possible
Lincoln Welder - amzn.to/2ufsIQX
Welding Gloves - amzn.to/2sYQBg4
Welding Hood - amzn.to/2tlBNvb
Welding Cart - amzn.to/2tlCHb3
Sony Camcorder - amzn.to/2ufAb2k
Mic - amzn.to/2tVk8rn
LMAO.. You chasing it with the brake cleaner to keep it going was hilarious!
Trick for cutting the foam use an electric knife like would be used in the kitchen. Also if you cut the foam about a half inch oversize for you seat plate it will wrap the edge of the seat plate smoothing the edges making it look more professionally done for those who never recovered a seat. Also the t-nuts should seat in flush to the board best way to install t-nuts is on the floor where the board wouldn't bounce. Also the best plywood to use is marine grade. And you should glue the foam to the pan plate before covering it as it prevents the foam from sliding and bunching up when cornering and braking.
Thanks!
Brandon dropped his gun. That had me dying. He seems like the guy who would be carrying
Lol huge knife and a gun. Close and far range
@@RedBeardsGarage mmmm omnmm.mm.m.m
@@RedBeardsGarage ..mmmmmmm.mmmmm.
M.
@@RedBeardsGarage m..mmmmmm.n...m..m.m
I would say bringing lil red up the hill was the craziest thing I ever saw; if I hadn’t have seen a 13yr.old boy pouring gas in a carb. From a coke bottle,sitting on the fender with the hood off while his 15yr. Old brother drove the old car down a country road.. but I was 15 and thought it was funny at the time. Bad thing was his daddy owned a little junk yard and a wrecker they could have used!😊
Man wish I lived close by. I was a sewing machine mechanic for 23 yrs. ,we could have a blast.
Love this episode. It speaks to me on a personal level. Grown men playing with childrens go carts. Buds playing chase the cart with break cleaner. Another buddy losing his glock in the leaves. GB America.
the most American thing *rides a kart * *something drops* "i lost my gun!
Lmf mouth off
@mark maietta especially a karen
I think your seat looked better than anything I have ever made!..that was a great video..I like those special nuts you used in the seat..that will help me for future builds
sometimes you can put seat covering in a pillow case after cutting it to size and putting it in the dryer making it more ply able and stretchy then it doesn't require the stitches or folding in the corners.
That is definitely a Murray Explorer with a missing roll cage and engine swap. I took my cage off after roll over as a kid.
mustie1 showed me the other day you can use an electric carving knife (kitchen) for cutting foam padding with ease! Great video BTW!
I know we need to get one
Electric carving knifes work really good for cutting foam
This was awesome! I love a guy on a fifty$ cart dropping his shooter!🤣
next project should be a 2 seated wrecker custom build gear low with a winch , fuel ,air, and a flat bed with all the off road riding you do you can go get what broken in the woods or on your land rev would be nice and a light on top .
That would be sweet. I think we will do that.
Yeah that’d be pretty awesome!
Yall need a kool garden tractor with that big predator for recovery missions! Love the channel.
Loved every second of the content! Your all on the right track!!!
Thanks for supporting us man
hey dont feel bad about showing something for the forty thousandth time. this is the exact kart i just got and greatly appreciate it
RB, love the channel and your testimony, keep up the great content! Seriously though- all the awesome workbenches you have and you decide to work on a piece of plywood on a chair... also the rivets on that 30 series back plate can be welded... don't trash it.
I will weld it back. I know lol I didn't want to mess my new pretty work benches up lol
Episodes like that are why I subscribe, like, and follow ya'll's channel. I'm think'n an episode of RedBeard push'n Mrs RedBeard on the Murray on an extended trail ride with lots of hill climbs. And hey, if you took the engine off, it'd be lighter!
Lol we have a lot more coming man and thanks for sticking with us
The ding when he took the ziptie off the clutch 👌
Great Job on the seat! I like it
Nice job on the seat.
Thanks man
Great video for new comers! Thanks and we be watching. 😀👍
Having fun and enjoying life. Made my day
red beard goes to walmart lol loved the footage
Lmao I live in Crossville, and found one of those old Murray's IDENTICAL to that the other day and the people wanted 500 bucks for it. Those things only cost like 750 or so bucks when they were brand new like 20 years ago!
You should make a go kart that has heated seats, inclosed cave, air conditioning, maybe power steering, have lights. Maybe Evan you can make attachments for it like a mower like this comment so he can pin it. I think it is a awesome idea. You should also put a v twin on it and it would be like a utility luxury vehicle.
DsNester 😂😃
We need to do a luxury go kart very soon
Your right, fully enclosed go kart with heat seats lights etc would be nice, street legal would be better tho
How do you only have 45k subs ive been here since the beginning of the channel and i i have to say you're the most consistent with the vids keep it up
I appreciate it man. Hopefully we will grow a lot bigger this year
Good job guys ! You too Lonnie 🙃 . Dig the sawhorse love the Tijuana tuck n roll as well man
Mr. Red Beard! You did OK on the seat covers. At lease your bringing the Go Karts and Mini bikes back to life. If it wasn’t for you guys and others these Go Karts will still be abandon are junked. Bringing it back to life for it to be ridden again. 👍🏽👍🏽up!
The seat actually came out better than all the ones that I have made in the past. You should make a video on seats
I may do a video on redoing a seat soon
Lonnie doing what he does best. Braking stuff to keep that content going.
Thanks for watching man
the next seat you make try putting some fiberglass resin on the wood before putting it together. it makes the ply wood water proof
That's a steal for a bad ass looking go kart!!!!!..it definantly has potential!!!!!..looks like bat mobile!!!
RBG ,
Im a new subscriber . Just started doing my own builds, your videos are great . Giving me ideas and instrctions i need to continue.
Thanks keep it up.
Was eny one waiting for him to staple his fingers on an axedent 😂 😂 😂
lol... I love the way Red says (allovit) lmao...I freakin love it yall!!! It means (out of it)!!!
Seat looks good man! Love your channel!
Thanks man
Lol that’s how i start my go kart 💀
@MANUZIO 44 not anymore but hopefully I can start back soon
The only clothing iron with a nitrous blow off kit:)!
Had me rolling out of my chair!
That Kart has a longer than usual back, you should add a bit of length and have like a pick up truck kart!
I'm from Australia so we call it a ute which in all honesty, is a smaller version of a pick up
Can’t wait till the 250cc
damn I'm early. I'm surprised it didn't have lawnmower tires on it with that fan belt.
Lol yeah I see those fan belts all the time on go karts
Same here along with replacing the rotted out seat with the cheapest folding boat seat they can find, and of course if the tires are not bald as slicks they go to walmart and get at least 3 different sized and/or brand lawnmower tires to put on it.
When I picked up the last one the guy kept going on and on about the "new" tires to the point I thought he was attached to them. After I bought it and got it loaded up I asked him if he wanted them back and I think it ticked him off. It had 2 different brand 20 inch atv tires on the front and 2 16 inch turf saver tires on the rear. When I test drove it the thing was dragging the ground all over the place and had no traction.
actually the back tires might be lawnmower tires when i bought my weedeater riding mower about seven years ago new it had those tires on it
Those are old knobbies, back in the 70s-80s just about any and all atvs had those factory. Kenda scorpions are a good example if they even still make them. I know back then atvs and lawn mowers shared rim sizing so it wasn't uncommon for guys to put the atv tires on a mower. We had a old rust bucket we mowed around our ponds with that had knobbies on all 4 corners back in the 80-90s because it would get stuck with turf tires.
guess i didnt need to mention new to me not brand new
There's nothing wrong with your seats they came out good better than mine did as for the crotch air vents that stylish LOL very aerodynamic
Your seat looked good to me and better than I could
I really need to either fix the frame on mine or find a frame to transfer all my parts to. I have a Murray Explorer just like this but with a custom seat, a Honda GX270 and 3 splits through the frame
BoostAddict mine is the same as this but has the full cage and decals (pretty good paint too). Full working condition, Tecumseh 6.0hp, drilled jets, ditched governor, coke can head gasket, modified air filter, 45mph top speed before I get too terrified on the road with the tires and alignment.
Coke can?
@@cainadkins3985 lol the ole coke can head gasket….If you have ever busted a head gasket and you are losing pressure you can Jerry rig it by cutting a tin can open and flattening it out and make an impression of the head into the tin, then cutting it around the impression to make a “JIG” that works as a gasket…usually a very temporary fix.. Sometimes ends up being long term
Im not judgin…my old Yerfie was basically held together with Band-aids and Bubblegum lol 😆
You should count all the mini bikes gokarts and everything u have show us and tell us the number of them
I've got a project on a kart just like this right now. It's got dual wilwood calipers with a kohler magnum 18hp. If you want some power get a predator 670cc with aftermarket parts from go power sports now talk about some torque.
Very nice Murray Explorer that's what it is I have two of the same ones they're great machines got mine in North Carolina Vail to be exact at my uncle's house
You know that Low Oil indicator you disconnected? I hope you may want to hook that back up, Predator engines aren't Briggs & Strattons, so they won't last long without oil :-) Sounds like the wife was having just as much fun filming you as you were having on that thing. Great build!
That seat was really good
My mom knows how to sew and I think the seat looks good so don't you worry about it
Glock 42? Love the ironing part!
Man, them kids looked like they were having a ton of fun ripping through those huge piles of leaves.
It might be hydrolocked the float may have stuck and filled the engine with gas I’d pull the plug and try spinning it over
We have a video coming up on what was wrong with it
Red Beard's Garage ok I’ll keep an eye out for it
Best video yet 😂😂😂😂
Thanks for watching man
You don't need no brakes,,, you ain't stoppin .
That seat turned out pretty good..
those fenders are super cool !!!
Love all these videos! They’ve really become something I look forward to!
Thanks man.
Use some para-cord if you have any lying around and make your own pull cord if need be
Damn seat looks great.
They have to do a racing chain driven lawnmower with a torque converter
I think the seat looks good
Thanks man
Good job on the seats I love them
Oh good job Lonnie. Lol
Looks really good on that go-kart young man.
Every time I hear someone say T nuts i always think of the Shiznit intro skit
50 bucks well spent.
honestly ,seats came out not too bad
i was expecting worse
lol
It's always good to blow a little stream off
Just for the sake of saving money and at least just for testing purposes only as you've heard said before. I, would have welded that back plate on that driven pulley to compensate for the busted rivets. That would have worked. Hope your doing good boss Redbeard
Oh and if the rivets aren't completely broke off and it's still in alignment you can weld it I welded mine 4 years ago and is still running strong just thought I'd let you know you don't have to buy a new one I love those Marie explorers
i like how he has a work bench but uses a chair and plywood
Get a chesp electric carving knife for cutting foam. Ull be able to cut corners ull see what i mesn. I found one at a yard ssle for 2$
I will do man
The seat is nice :)
I THINK YOU DID GOOD ON THE SEAT!
Well thanks man
If you have one avalible id do a cheap 22mm chinese pitbike carb they are a tad smaller then the mikuni but would be good for a stock internal engine build with a cheap short NR mikuni adapter manifold
I may get one to mess with in a later video
I think this one was around 16 bucks on Amazon they do sell jets for them if you needa go bigger or smaller
weld the 7 in pulley even the one from yerf dog one that isn't broken so it wont break when you beet on it
yerf dog 5/8 shaft murry 3/4
when I got my murry first thing I had to do is weld that pulley didn't even take it off
You should also start playing this game it's called The Game of Life and Samoa board game it's not a video game basically if you find your opponent saying the code word is sike got ya and then they have to do either 5 or 10 of their work out of choice and if you go through a doorway it adds to more things to it and if you want to spare them you don't say got ya and every single time somebody gets got you have to change the word
The iron part was hilarious
hYdro lock from that fuel leak !
Got a video coming out soon on the engine tear down
i just tightened the carb down and it worked fine
Doing the exact same thing to my 85 dollar go kart doing almost the seat exhaust gas tank air intake I'm a kid and I love doing this stuff butt it is expensive
I had a Murray like this i traded it for a junk shot gun i never use i want that Murray back
RBG does the big filter that comes with the kit does it fit on the mikuni or it only fits with the adapter on the stock carb?
It comes with the performance kit and it does not fit the mikuni
Had bought one of these for $30 couldnt find a belt for it for almost 2 months.
Go power sports has them man
Size of belt please
Pull the plug and see if it will spin over before you tear it apart.
We did and it still wouldn't. Video out next week on what was wrong with it
It was hydrolocked
He said it in another comment
E.P.A going to pay you a visit... lol...
What happened to the cage? Mine has a 6.0hp Tecumseh and a full cage along with Murray explorer vinyl stickers on the front of the kart (you’re missing the metal by the pedals). I think the only thing my kart doesn’t have is the plastic cover on the rear and some damaged wood on the bottom of the seat (common issue).
Straight up chain drive no reduction 40 60 front gear rear gear
Red beard sounds like you need a new key way on the motor
5,42 cool wee bike behind u be good to see that running? . 10,56 would be taking the kart back to to shop instead of lying in the rain
I've made seats before. But I always keep an eye out for someone throwing out a coutch and cut the back out it and grab a cushion for the foam. Only some have the good stiff foam. Did you try out the black pipe in the plumbing section to make handle bars? Great job on the seat bu the way. Love the vids
We haven't tried the plumbing tube yet but I do have some. Probably going to look out for some couch seats for the future for sure.
HEY GUYS YOU HAVE A AWESOME CHANNEL...KEEP IT UP
You need to do a drag race with no gas just a helper running along beside with a can of starting fluid.
Hobby Lobby with 40% Coupon = priceless for your foam. that is if you have one near you
Ain't got no oil in it
It had oil in it. Video out next week on the tear down of the engine
Start raising Naugas for your own nauga hyde suplly. No more Walley world.