Me and my cousin had one, that got passed down and eventually lost but, it was a Ferrari looking one, bright red with a front trunk, big ole wing to put your cars or halo Legos on them😂😂
This was a refreshing approach to build videos. You stated the goals of the project, you built the project and ended with action shots of the finished project. No b-roll antics from shop characters, no moments where you stop to say, “this video brought to you by…” - just a straight forward awesome build. Subscribed
The more I look at the back, the more I feel SN95 Mustang taillights would work well. The 94 to 95 taillights. Maybe Foxbody LX style tailpipes. Just a thought.
The best looking rafe car bed Ive ever seen. Obviously a hard thing not to jump on in terms of a gokart build. Looks like one out of the box. You are so lucky to have a gokart.
that is so freaking awesome you just fulfilled every kids dream that ever slept in that bed popups and lights with dual exhaust would be ultra wicked on this thing ( typed all of this before watching the end of the video you took the words out of my mouth holy crap lol)
My opinion, great project I picked up a ghost motor for my sons go kart. It’s an old-school Manko and it rips it pretty fast. I think you’ll be impressed with the power you get from that motor. I did have to replace the carburetor carburetor. I got leaks the same as the carburetor I had, I look forward to watching the video. Thanks for sharing and once again great idea.
I know! I wanted to dual it out the back so it was just temporary, but then life happened. I'm going to space the tank up a bit for now and add clearance and duals if there is enough interest in another episode
you earned my sub with the support , i love this build , but honestly show me some lights rear lights and front lights make them blinkers some under glow lights make the mufflers out back active!!
the exhaust popping out of the actual exhaust holes would be amazing. The only thing that worries me is how close the exhaust is to the gas tank. As well as the gas line touching parts of the motor that could get quite hot. I would hate to see all of that work burn. Your version of the car bed is BY FAR the best. Looks so freaking cool. Love the idea of pop up head lights. I think in the future it would be super cool to see a full size bed build. Maybe even a full size lifted bed, for mudding or off road karting. You certainly gained a sub my man! hope to see tons of spin offs and an entire series on this!
So rad! Pop up headlights, led taillights, and see if you can figure out how to put the original 5 spoke plastic "wheels" as hub caps, would me amazing! May e some sorta floating bracket off the kart wheels or something.
We are definitely on the same wavelength! I actually thought of doing each of those for this one, but it was dragging out. Hopefully there is enough interest for a part 2! Thanks for watching bro!
Really cool. I've always wanted to do one of these. . Wanted to make a little bit of a hood further up the wheel wells then makeshift windshield . Would look more like a convertible Corvette sort of thing💯
You should seriously consider throwing in some led headlights and taillights into that! ❤ It even has the shapes molded in the plastic! For the tail ones you could paint the whole 'molded' ones black and fit a couple round ones inside. (Or led strips!) And in the front, fog lights in the holes with a grill in the middle and two round ones on each side above, at both sides of the white logo! Even paint the bumpers black too! And small license plates! 😂 Daaang I'd love to make that myself! Lots of potential! 😅
Awesome!! And love the Predator engine sounds, especially single cylinder!!! Maybe I would make a mini 2023-24 Silverado 3500HD Dually powered by 2 Predator 420's that could rev up to 9K+ Rpms!!! (Imagine?!)
I wonder what the original white wheel cover things might look like on those wheels and perhaps working tail lights. Pop-up headlights could be awesome if you can make it works.
My goodness me... All I could say during the final drive is, "How perfect is thiiiis!!" Subscribed for sure 💯 Looking at getting a full twin size one for a gaming lounge because of this. I always wanted one as a kid. Now I HAVE to have one! If only you could mass produce these 😭😅
Just found your channel this morning, watched a couple videos. The race car bed is my fav build so far. It’s easy to tell by your son’s excitement and your rad STD shirt that you are definitely not “through being cool!” 😎
Cheap joints to move the steering are 1/2" drive universals for sockets. Just weld them in where you need them. Easy way to move things around . I made my sons be able to be driven from the center seat to the right or left seat position. So if you want to be driving solo or give rides to the kids...
I think it would be really cool if you converted it like a sized up electric RC car. Since youd have a remote control instead of steering wheel and electric components you might be able to make the seat in to a reclinable bed. Returning the race car bed function not just the aesthetic
Even the song with the street fighter "perfect" producer tag is hoonigan spec. The golden days of hoonigan are gonna be missed. But this project, is what theirs should've been. I was also disappointed by how theirs turned out. Edit: the entire backing music was perfectly hoonigan. So glad their fans are keeping the spirit going. You got yourself a sub.
OK, this is the coolest go-kart build I have ever seen... If I owned a go-kart track i would pay you to build me 10 of those easily. Air ride suspension or... Hydraulics so you can go to car shows rolling in on 3 wheels.
That current wheel setup looks cool wide in the rear skinny up front I’m a fan of the staggered setup only way I’ve seen to get wide tires for 6” wheel is getting slicks
the drum brake band might be installed backwards. you always want the pulling force to also follow the rotation of the wheel. ill try to illustrate with typing. kart direction
It doesn't have the band. It's this drum kit. Works awesome now that i got rid of the bend in the rod. www.bmikarts.com/Complete-6-Brake-Assembly-Drum-Spacer-Hardware_p_3813.html
You have a new subscriber 👍 This was a great video and an amazing build, nearly on par with a grind hard plumbing video but on a smaller scale. I'd really like to see you do a Honda cub 50 with fat tires and ape hangers. I really enjoyed this and I look forward to seeing more fun and unconventional builds.
Makeing a custom exhaust that replaces the plastic ones would be awesome
was gonna say the same thing so looked for the comment 1st....but yes cut out the plastic exhaust and make the real one go in place
@@phattony9057 the heat from the exhaust would melt the body
True
@@9dvdsprobably not… especially if he distanced them a little. then again if it does burn, it adds character to the build.
Titanium exhaust.
not gon lie, thats a smart way to get a cheap go kart body
it kinda looks like a junior class shifter kart. it's pretty epic
And a really cool one, too!
And the entire body doubles as a substantial bumper 😂
I haven’t seen one anywhere besides an abandoned house video xD it’s been over a decade
Me and my cousin had one, that got passed down and eventually lost but, it was a Ferrari looking one, bright red with a front trunk, big ole wing to put your cars or halo Legos on them😂😂
Now that's a literal sleeper build
buh dum tsss
Comedy Kryptonite.
You win you’re literally him I’m rolling around on the ground dead ts
I like the wider back wheels fits to the car style
Forreal I thought the staggered was rlly cool
I think the "bubble" tyre look fits the cartoon style body.
Yessirr got that stretch 🔥🔥
yoo, stretched tires are like Richard Simmons and RuPaul hosting the Special Olympics. Why would you even want to? lol
you remember the time when you pretended that your race car bed was an actual race car?
this man is ACTUALLY living that dream.
I remember the time I thought my race car was my bed. Things are different now.
This was a refreshing approach to build videos. You stated the goals of the project, you built the project and ended with action shots of the finished project. No b-roll antics from shop characters, no moments where you stop to say, “this video brought to you by…” - just a straight forward awesome build.
Subscribed
Now just add a small 12v battery in the front and run some headlights and taillights. Then put a spoiler on it. And I’d say maybe think about a TURBO!
and there is no enough room for turbo
It needs pop up headlights
@@Cultist564 there is definitely enough room for a turbo. Your trippin. There’s plenty of room.
Also needs a massive sticker that says TURBO
The turbo ain't gonna be that big look at that motor @@Cultist564
The more I look at the back, the more I feel SN95 Mustang taillights would work well. The 94 to 95 taillights. Maybe Foxbody LX style tailpipes. Just a thought.
I like your style and eye bro, we are prolly kin in some way lol
I would think 3rd Gen firebird style pop-ups considering the sleek design of the body.
Bro Ferrari style LED brick headlights would be cool 😎
the license plate needs to be sleeper.
professional chef
Too perfect
or Zzzz
The best looking rafe car bed Ive ever seen. Obviously a hard thing not to jump on in terms of a gokart build. Looks like one out of the box. You are so lucky to have a gokart.
that is so freaking awesome you just fulfilled every kids dream that ever slept in that bed popups and lights with dual exhaust would be ultra wicked on this thing ( typed all of this before watching the end of the video you took the words out of my mouth holy crap lol)
pretty cool project. would love to see you add the dual exhaust setup
I never knew I needed something from my childhood as much as I’m needed this go kart bed. Great build!
My opinion, great project I picked up a ghost motor for my sons go kart. It’s an old-school Manko and it rips it pretty fast. I think you’ll be impressed with the power you get from that motor. I did have to replace the carburetor carburetor. I got leaks the same as the carburetor I had, I look forward to watching the video. Thanks for sharing and once again great idea.
Pop up headlights will nice👌🏼
So glad to see the exhaust header wrap in the final montage, that plastic fuel tank/header situation was spooky🤣🤣 Great build!
I know! I wanted to dual it out the back so it was just temporary, but then life happened. I'm going to space the tank up a bit for now and add clearance and duals if there is enough interest in another episode
you earned my sub with the support , i love this build , but honestly show me some lights rear lights and front lights make them blinkers some under glow lights make the mufflers out back active!!
All those ideas are great. You could also cover up the front open space with one of those large blue plastic drums, give it a fake hood.
the exhaust popping out of the actual exhaust holes would be amazing. The only thing that worries me is how close the exhaust is to the gas tank. As well as the gas line touching parts of the motor that could get quite hot. I would hate to see all of that work burn. Your version of the car bed is BY FAR the best. Looks so freaking cool. Love the idea of pop up head lights. I think in the future it would be super cool to see a full size bed build. Maybe even a full size lifted bed, for mudding or off road karting. You certainly gained a sub my man! hope to see tons of spin offs and an entire series on this!
Dude these gokart builds are awesome. Super cool! Just found your channel. Hoping to find one of those toy electric cars converted into a kart.
Definitely the pop up headlights!!!!
So rad! Pop up headlights, led taillights, and see if you can figure out how to put the original 5 spoke plastic "wheels" as hub caps, would me amazing! May e some sorta floating bracket off the kart wheels or something.
We are definitely on the same wavelength! I actually thought of doing each of those for this one, but it was dragging out. Hopefully there is enough interest for a part 2! Thanks for watching bro!
Bro just casually taught me how to build a go-kart. thank you 🙏🏾
I had this exact bed as a kid lol. This is amazing
You're a legend. Some suspension would be badass.
would be dope if you could pull up to a car show or drive through, valet or something where people aren't expecting to see such a small car..lol
Really cool. I've always wanted to do one of these. . Wanted to make a little bit of a hood further up the wheel wells then makeshift windshield . Would look more like a convertible Corvette sort of thing💯
Got to be my favorite build yet , absolutely love it
Everything is wonderful and complete, but you only need to add a suspension system to the seat only and add a spring under the seat and nothing more.
You should seriously consider throwing in some led headlights and taillights into that! ❤
It even has the shapes molded in the plastic!
For the tail ones you could paint the whole 'molded' ones black and fit a couple round ones inside. (Or led strips!)
And in the front, fog lights in the holes with a grill in the middle and two round ones on each side above, at both sides of the white logo!
Even paint the bumpers black too!
And small license plates! 😂
Daaang I'd love to make that myself! Lots of potential! 😅
Awesome!! And love the Predator engine sounds, especially single cylinder!!! Maybe I would make a mini 2023-24 Silverado 3500HD Dually powered by 2 Predator 420's that could rev up to 9K+ Rpms!!! (Imagine?!)
Very nice build. Looks very good. Almost like a mini nascar!
I ❤ this build!!! Please add as many extras!! The dual exhaust would be sweet!! No pop up lights! Flush mount LED's Please!!
Cool build! Nice neighborhood! I keep eyeballing that maroon bug eye WRX too.
Ikr
You built my childhood dream car!!!
I wonder what the original white wheel cover things might look like on those wheels and perhaps working tail lights.
Pop-up headlights could be awesome if you can make it works.
My goodness me... All I could say during the final drive is, "How perfect is thiiiis!!" Subscribed for sure 💯 Looking at getting a full twin size one for a gaming lounge because of this. I always wanted one as a kid. Now I HAVE to have one! If only you could mass produce these 😭😅
The tires are great I think, but it's your ride...... Great video
I would stop riding all my motorcycles and just cruise around town in this thing.....awesome!
Just found your channel this morning, watched a couple videos. The race car bed is my fav build so far. It’s easy to tell by your son’s excitement and your rad STD shirt that you are definitely not “through being cool!” 😎
Glad you caught that 😎
Cheap joints to move the steering are 1/2" drive universals for sockets. Just weld them in where you need them. Easy way to move things around . I made my sons be able to be driven from the center seat to the right or left seat position. So if you want to be driving solo or give rides to the kids...
Watching this video made me smile from ear to ear use a fool and I love you for it keep working your magic may God bless you for it
Living everyone’s childhood dream. We all wished we could drive the race car beds we were lying in as kids.
You should put head lights and turn signals and register it to make it road worthy. lol. Great vid!!!!!
ace work, much props - glad you ditched the stretched tire bs with the 6" wheels, just my 2 bits lol
I think it would be really cool if you converted it like a sized up electric RC car. Since youd have a remote control instead of steering wheel and electric components you might be able to make the seat in to a reclinable bed. Returning the race car bed function not just the aesthetic
Oh , the red bugeye …that is how you know your a car enthusiast 👍😁👍
That’s the coolest thing I’ve seen on the Internet in a while
Even the song with the street fighter "perfect" producer tag is hoonigan spec. The golden days of hoonigan are gonna be missed.
But this project, is what theirs should've been. I was also disappointed by how theirs turned out.
Edit: the entire backing music was perfectly hoonigan.
So glad their fans are keeping the spirit going. You got yourself a sub.
This is ridiculously cool
Insta-suscribe man 👍
Really ingenious project. Wholesome dad.
Looking forward to seeing more putting off current projects 😂
brotherrr this thing is pimp asf you have GOT to make a follow up vid. Pop-ups would go crazy, you should put some led strips in the taillights too
OK, this is the coolest go-kart build I have ever seen... If I owned a go-kart track i would pay you to build me 10 of those easily.
Air ride suspension or... Hydraulics so you can go to car shows rolling in on 3 wheels.
It would be super sweet to see you paint the body/ lights and give it some chrome for the little fake exhausts haha! Great watch!!
I say keep the rear wheel cause they remind me of slicks 😊 great build tho like ur thinking process
a spoiler would be sick, cool build!
That current wheel setup looks cool wide in the rear skinny up front I’m a fan of the staggered setup only way I’ve seen to get wide tires for 6” wheel is getting slicks
7:10 Personally I love the fat tires. Got the old muscle car look, Fat meaty tires.
Edit: Although those flat tires do look pretty good
Super cool build
Perhaps the steering can be cable pulled so it can be lower to the floor without being very sensitive
looks good! Does your neighbors like your inventions?
Absolutely
This thing is ridiculous, in all the best ways! It looks waaaaaay better than it has any right to. Great stuff! Full lighting would be awesome!
Definitely would look better with some LED headlights/taillights and dual exhaust tips in the same spots as the bed. Maybe even a grill in the front.
Dark midnight blue underglow, pop up headlights, functional dual exhaust.
Headlights, fender flares, and a lil windshield would be cool to see!
Someone get this man a work bench
17:00 add some 45⁰ pieces to that brake rod setup. Or maybe just another tube or two to join em
Adding a rollcage, and a custom body kit would look awesome!!! It looks surprisingly good, I would've never thought of using a car bed 😆
That's so badass! I probably go extra mile with some simple lights and such 👍🔥
Thats actually really really cool, i hope someone would do it with the mcqueen bed
Awesome build, love the overall process involved in this 👍.
18:41 What is that sweet diy looking side x side in the driveway!? I would love to build a street legal one
It's called the TAZR. Its a 2001 Crown Victoria police interceptor. I have lots of videos on the channel if you want to check it out
@@gamblerspec will do!
Really cool build great job
Great project!!! You should try to incorporate the white hub caps I think it will add to the original visual aspect
cool build would like to see if one can fit a few LED lights into the back and front of the cart make it look much cooler
I suggest you add back and front lights and add some decorative intakes
Every body gangster until you get gaped by toddler
😂
Spelling makes a difference sometimes
@@RealFuzzyPickLE530 ayo 🤨
Ah yes getting gaped by a toddler😂
@@Alpaca5089 miss input calm down
i ment gapped
Yous should add decals to make it look like a Honda nsx, the body shape already looks like one!
Dude, the final result is amazing!
It looks freaking awesome! 👌
“Ferb, I know what we’re going to do today”
the drum brake band might be installed backwards. you always want the pulling force to also follow the rotation of the wheel. ill try to illustrate with typing.
kart direction
It doesn't have the band. It's this drum kit. Works awesome now that i got rid of the bend in the rod. www.bmikarts.com/Complete-6-Brake-Assembly-Drum-Spacer-Hardware_p_3813.html
Dude! This build was awesome! Great job!
All smiles here. I've always dreamed of building a go cart since I was pre teen. This gets me all giggly and stuff.
7:40 car looks nice with this wheels.
You have a new subscriber 👍
This was a great video and an amazing build, nearly on par with a grind hard plumbing video but on a smaller scale. I'd really like to see you do a Honda cub 50 with fat tires and ape hangers.
I really enjoyed this and I look forward to seeing more fun and unconventional builds.
Amazing
Lights would be very cool
Pretty much any suggestions I had have already been addressed in the comments. Love the build, looks great and seems like a blast to ride!
Nice job!And you wore a helmet 👍🏽
He’s living all of our child hood dreams. We all pretended to drive to these and he made it happen
Looks like a lot of fun , I’d paint the tail lights red.
If we did this in the UK , your licence would be gone within the hour🤣
Bigger engine and maybe make it a shifter for more speed, imagine braking with that
Looks so good! Ever tried making a 2 stroke one? With like a Yamaha GT80 engine
I have plans..
@@gamblerspec hell yeah brother
Every kids dream!! Sick build! 🏁🏎️
Freak'n AWESOME man!!
Made that look way too easy! Well done.
I had that bed as a kid, so many memories!
I had that exact bed when I was 3, that's litterally how it felt going to bed lol
Awesome work….came out 🔥👍
Final product is badass!
Hellll yeahhh Brotherrrr 🦅